Video Transcript for Feature Breakdown: Oklahoma State University Chrome Logo State Emblem 2" Hitch Cover

Today we're going to be taking a look at the Oklahoma State University 2 inch hitch cover from AMG. The hitch cover is going to allow you to show your school pride. It adds a clean finish look to your hitch and it's going to help keep dirt and grime out of the receiver tube of your hitch. This hitch cover is made from a steel construction. It's going to feature a really nice black powder coat finish which is going to do a great job at resisting rust and corrosion. Here at the front we've got a nice colored emblem that's got a chrome-plated boarder that adds a lot of style to the actual hitch cover. It says OSU right there in the center. It's going to feature a nice rust proof and fade proof design.

The product is American made. Here on the back side it's got a foam gasket that goes around the piece that slides into the receiver tube of our hitch. That's going to help really reduce rattling between the hitch and the hitch cover. This is an officially licensed product. It does require a hitch pin and clip or a hitch lock for a complete installation. Those items are sold separately so if you're in need of one, you can find them right here at etrailer.com.

The pinholes on the hitch cover will accept the standard 5/8 inch diameter pin. A few measurements to go over with you real quick starting with the overall width of the hitch cover face. It's going to be about 5 inches. Overall height is going to be around 3 and 1/2 inches, and the distance that we have from the back of the foam pad to the center of the hitch pinhole is going to be pretty close to 2 1/2 inches. Now this is designed for a 2 inch X 2 inch trailer hitch receiver. A very simple installation process.

Just slide it into the receiver tube of your hitch, line up your pinholes and secure with the hitch pin and clip or a hitch lock. That's going to do it for today's look at the Oklahoma State University 2 inch hitch cover.