Getting 3 bikes strapped down gets easier when each one has a place to start. These Moto-Choks and included extender create more handlebar clearance, making it easier to secure all 3 bikes before you head out.
Getting 3 bikes secured is easier when they stay upright from the start. The Moto-Choks hold each bike in position while you secure it, making it easier to get the straps where you want them without balancing the bikes at the same time.
These standard chocks fit most front tires up to 4" wide, covering dirt bikes, dual sports, and adventure bikes. The optimized height and cradle depth give the tires plenty of support while making it easy to load the same bikes again and again.
This kit already includes a Moto-Chok Extender to create additional handlebar clearance between bikes, but every hauling setup is different. Add a 22-Degree Adapter (ZT52FR) or a Rise/Drop Plate (ZT25FR) to make additional adjustments for your setup.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone. Steve here with etrailer. Today we're taking a look at our Z-Track motor chalk standard bike chocks with extender made for three bikes. So folks, use can let you load three bikes the same way every time. You're going to be able to hold the front wheels where you want them while you secure the bikes. This will attach to your Z-Track that is custom to your vehicle.
So make sure you get that separately if you don't already have it. And the Z-Track again will mount to the front bed of the truck as you see the image. And then you will mount these chocks to that Z-track. And this middle one, you do have an occluded extender and that is there to get this middle one bumped out. So where we have handlebars and handlebars have space, we're not hitting each other when we're loading our bikes, dirt bikes, those kind of things, motorcycles.
And then you're going to have two O-ring tie downs per wheel chalk. And these are made for Z-Track and E-Track. They work for both, but mainly predominantly designed for Z-Track. And then of course you got your tie down holes on all of these chalks along with the Z-track mount in the back. You do have three sets of adjustments so you can make this higher or lower depending on your personal setup and your needs.
And this is all heavy duty steel. It is powder coated so you don't have to worry about rust, corrosion, anything like that. And what's nice about these standard wheel chocks is I can put my bike up inside of here. I can almost probably let it sit there and this is going to hold it in place while I get up and strap everything down. Now if you don't have straps, we carry them separately as well.
I recommend personally kind of crisscrossing your straps, meaning the strap here is probably going to come down an angle over here to one of these Z O-rings and vice versa versus just straight back on the thing, if that makes sense. That way you're holding it tight from both sides. Now these accommodate up to a four inch wide tire and these are 17 inches tall overall. So again folks, this is your set of three. These are the standard wheel chocks with extender. I'm Steve with etrailer. Thanks for watching.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.