Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
These frame-mounted tie-downs create solid attachment points that keep your camper locked down and balanced. By mounting to the truck’s frame—the strongest part of the vehicle—they spread the camper’s weight evenly and lower the center of gravity. That means a smoother, more stable ride with less sway from wind or uneven roads.
The tie-downs bolt directly into pre-existing holes in the frame, so there’s little to no drilling and no need to modify anything. Because they mount tight to the frame, you get maximum strength with minimal loss of ground clearance. The install is straightforward, and everything you need for mounting comes in the box.
When you’re not hauling your camper, just pull the arms out of the brackets and your truck looks stock again. The brackets stay tucked tight against the underside, almost invisible from view. It’s a clean setup that protects your truck’s appearance while still being ready for your next trip.
Each tie-down is made from black powder-coated steel that resists rust and corrosion. The heavy-duty build stands up to long miles on rough roads and through all kinds of weather. You can count on them to hold strong trip after trip.
Each rear tie-down gives you two pin holes on the arm so you can adjust how far it extends to clear sidewalls or fenders. Two anchor holes let you match your turnbuckles for the best angle and most secure hold. Once tightened, your camper stays planted with no shifting or sliding around.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today, we're going to be taking a look at TorkLift's line of Custom Frame-Mounted Camper Tie-Downs. This is for the rear.You'll want to check etrailer.com's fit guide to verify which ones are going to work with your vehicle.They're also available for the front. So, you can get a matching set custom made for your application. These custom mounted brackets are going to provide an easy attachment point to hook up your camper.What's additionally great about those is that they have the removable ends, so when you're not using it, they'll be hidden away and your vehicle will look like factory.The custom mounted brackets we're engineered to provide you with the best location for your tie-down point, to evenly distribute the load. So once they're attached and adjusted, this'll keep your camper from being too top heavy. This will increase the overall ride quality while your camper's attached and the safety.The attachment points are removable and adjustable.
There'll be two loops here where you can make your connection to your camper and there's two holes here to adjust the length of how far your attachment point sticks out.You can use either hole. So if you have very wide camper, you can use that first hole, or if your camper is tucked in nicer, you can use the second hole. The included pin will slide through the hole and keep it in place.It's made of a durable powder coated steel, so it's going to be extra strong and rigid, to keep your camper tied down nice and snug and the powder coat is going to prevent any rust and corrosion from occurring.When you're ready to hook up to your new connection point, take your turnbuckles and attach them to your camper. Now, if you need some turnbuckles, you can pick some up here on our website. You'll hook it in to your camper and you'll also hook it in down here on your new attachment point.Then, depending on your style of turnbuckle, you'll want to tighten it down.
Ours is a twist adjustment type. There are many different styles.And now with both sides in place, we'll repeat that same process in the front.Compared to Stake Pocket, or bumper-mounted camper tie-downs, frame-mounted tie-downs will provide better handling. They also mount out of sight, so they will be undetectable when not in use, giving your truck a cleaner look.Because the custom fit brackets secure tight against your trucks frame, there is no loss of ground clearance; and that completes our look at TorkLift's line of Custom Frame-Mounted Camper Tie-Downs for the rear.
Ratings & Reviews
Gwendolyn Y.
6/3/2025
Install looks great, Robert! Do you already have your camper ready to go for an adventure?
Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!
Monty
7/10/2026
Product is working great , what is fantastic is the engineering for the fit to the vehicle and the tools they give you to fish and hold bolts where they need to be during installation. Great thought process for instruction for installation.
Brooke M.
12/18/2024
Yay! Thats what we want to hear! Where all did you get to go in those 9,000 miles?
Jennifer
3/22/2022
These are still working perfectly.
Floyd D.
11/11/2021
They are starting to rust significantly. That is very disappoint considering the very high cost of these. It is interesting that they dont allow pictures of the product for this update.
Heather A.
10/12/2022
Thank you for your photo. Torklift does recommend to use the hitch adapter for the 2020 Ford F-250. The adapter does need to be turn horizontally to fit inside the hitch not vertically.
David
10/14/2025
Bought these tie-downs a year ago and they have proven to be easy to use, very sturdy, and hold my Palomino to the truck bed tightly.
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris S.
1/28/2025
One year later, continuous use, working perfectly.