To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you’re hauling your camper over long distances or rough roads, you need a setup that keeps everything stable. These front TorkLift tie-downs mount directly to the frame, the strongest part of your truck, to evenly distribute your camper’s weight and lower its center of gravity. That means less sway in crosswinds and a smoother ride overall. With your camper locked into the frame instead of the bed or bumper, you’ll notice better handling and confidence on every mile.
These tie-downs are designed for a bolt-on install that uses pre-existing holes in the frame. That means little to no drilling and no cutting or modification needed. The brackets mount tight to the frame for minimal loss of ground clearance, so they stay up and out of the way whether your camper is loaded or not. Install time is quick, and once set up, the tie-downs are ready for years of use.
You don’t have to live with bulky hardware once the camper’s off. The removable arms slide out easily, leaving behind low-profile brackets that are tucked nearly flush beneath the truck. When you’re not hauling, you’ll barely notice they’re there. When it’s time to load up again, just slide the arms back in and lock them down for a solid connection.

Made from powder-coated steel, these tie-downs are built to handle heavy use and stand up to weather exposure without rusting or weakening. The black finish holds up well against road salt and debris, keeping them looking clean year after year. Each kit includes two front tie-downs and all required installation hardware for a strong, long-lasting mount point you can count on.


Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at these Torklift custom front frame mounted camper tie-downs. now, these are a custom fit part. They are designed to fit the 2019 and newer Ford Ranger trucks, with a 6' bed, without a running board or a step underneath the bed, and with the factory or aftermarket hitch installed. Now.
On a custom fit part like this. I always like to recommend for you to go to our website, use the fit guide, put in your year and model vehicle, and it'll show if this will work for your application.Now, these tie-downs provide the attachment points at the front of your truck for securing your bed mounted camper to your vehicle. We do also sell the rear tie-downs. Those are sold separately on our website. Basically, one tie-down will go on the driver's side, one will go on the passenger side.
The two holes right up here on the tie-down inserts, they allow you to connect your turnbuckles from your camper to your truck, and not interfere with anything on your vehicle. There's also two holes on the shank here of the inserts, allows for different width campers. If you put it on this first hole, it'll extend it out. There's another hole here, you can slide it in if it's a narrower camper.Now, this will give you a dramatic improvement with vehicle handling and stability, and it is the safest way to haul a truck camper. It prevents any vehicle sway and camper movement in all directions.
You can haul your truck camper confidently by attaching your tie-downs to the strongest part of your truck, which is the frame, and vehicle manufacturers do recommend that all full height, sliding camper bodies should be directly attached to the vehicle frame structure. The frame mounted design ensures excellent handling, by securing the camper to the truck's base instead of its bed, which will better distribute the weight to keep the setup from being too top heavy. It will also help avoid bed and bumper damage that's common with other tie-down systems.This is a fast, no drill installation, securing your truck camper to your truck, helps you maintain the value of your truck and prevent any rust or bed damage by avoiding drilling into your truck bed or bumper. As we mentioned, these are custom fit for your vehicle, the driver's side and passenger side brackets. The brackets right here, these are what'll fit tight to your truck frame, and there's no loss of any ground clearance, so it's perfect for off-road truck camping.
And then basically, if you're not hauling a camper, you remove the inserts. Basically, these brackets are hidden, so it returns your truck to its original look when they're not being used as a tie-down.And then when you use it as a tie-down, you just take your insert, here's the two holes I had mentioned for the different width campers, and you just slide it in here. And again, if you line the first hole up just like that, that first hole, and then you clip it, that'll be for a wider camper. If you have a little bit narrower camper, you could slide it in even more, and then line that hole up and clip it, and then you're ready to go, if it's a narrower camper. These are a steel construction. They have a nice black powder coat finish for durability. It does include all the parts here on the table, the two front tie-down inserts, the two frame brackets, all the necessary hardware for installation, nice set of detailed instructions on how to install everything, and these parts are made in the USA.But that should do it for the review on the Torklift custom front frame mounted camper tie-downs.
Ratings & Reviews

Mike L.
10/29/2026
Thanks John, we sure appreciate that! I'm glad to hear your tie-downs are working well for you...

Mark
6/6/2025
These tie downs are sill working as advertised. I have travelled over 20,000 mi with them in various conditions with about 10 of that time in dirt roads or 4wd roads. Nothing too crazy, but with my camper and these tied downs I am confident that the camper will remain attached and be secure. It hardly moves around at all. They are worth the money and I can still remember how easily they installedvery welll thought out design and installation!


Heather A.
5/1/2026
Hi Jim! I can see why that would be frustrating for sure. The good news is you usually don’t have to do anything drasticmost fixes come down to slightly repositioning the exhaust system rather than fully relocating it. That can mean loosening and adjusting a bolt-on hanger, adding a small spacer, or even tweaking the hanger position just enough to create some clearance. I’ll drop this article here since it walks through a few simple ways to fix it step-by-step, but overall you’re on the right track it’s typically just a matter of giving the exhaust a little more room so nothing is rubbing or under tension. This help article is about a hitch install but it still applies here.
Helpful Links

Jenny N.
12/5/2022
I reached out to the manufacturer. They advised that they think it is a combination of the Northern light camper anchor point location being situated so far back on the camper and possibly the front of the camper not being all the way against the bulkhead of the bed if it is moving forward still. Otherwise, everything looks typical of a truck camper and truck installation. If it has any room to slide forward, it will in a sudden braking situation.

Albert
12/6/2022
Jenny thanks for your reply and diligence in reaching out to TorkFit. The NL camper does have forward bumpers for abutting the bulkhead. However when bulkhead contact is made the body of the my 21 Silverado makes contact with the fiberglass body of the camper. The pressure from a recent ‘sudden stop’ and ‘slide forward’ created enough pressure to chip paint on the truck. The bumpers make contact with the bulkhead about 10”-12” above the bed-bulkhead connection. The 90* corner at bottom, this should be the strongest area. I will install stop chocks at future loadings. I’ll also attempt to possibly install the TorkFits in a more vertical position. Thanks.

Lazer S.
12/30/2025
Glad to hear you are liking them, Milton! And I agree, the TorkLift tie downs are superior to the HappiJac tie downs. They are just more secure and heavier duty. At least in my opinion. And that sounds like quite the trip! Was it just a camping trip or did you do some fishing and or hunting?

Charles F.
5/24/2021
A year later and I couldnt be happier! I stand with my previous review 100

Dot
7/16/2023
A year later, I just got back from camping trip. I love the easy set up of these hitches. I’m a 65 year old woman, and I can put these mounts on my truck in less than five minutes. Then, another 10 or 15 to put the chains and turn buckles on, make them tight. I usually drive about 5 miles maybe 10, go get gas, and give all the chains a shake to make sure they’re still tight. If not, spin the turnbuckles a time or Two. And off, I go. I am extremely happy with this investment. Of all the things I bought after buying the camper, this has brought me the most security and feeling of safety. Good luck, happy camping whatever you decide.

Reed
4/12/2024
This is a very superior product. It was easy to install and is very functional and looks great. I highly recommend this product. Very well made and designed.


Scott
12/1/2025
It was an easy install, and they have worked with out flaw. I would recommend torque lift products to anyone installing a pick up camper. 2018 F 250 short bed crew cab.

Louis
8/4/2024
Couldnt ask for anything better. I am using them on a regular basis. When not in use I remove, clean and store them in my garage. No rust issues and the brackets attached to the truck are just as solid as when I first torqued them to the trucks frame. I definitely recommend them to anyone looking for proper camper tie-downs. PS: Their customer service, as always, I outstanding!
Do you have a question about this Truck Camper Tie Down?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.






Jerry
8/24/2022
I am very pleased except the driver side rattles incessantly and I wish it didn’t.