Video Transcript for What to Know About the TorkLift Tie Downs-TL25NR

Hi, everybody. Andy here with etrailer.com. And today we're going to take a look at these forklift talent custom frame mounted aluminum front camper tie downs. These tie downs provide attachment points at the front of your truck bed for securing a bed mounted camper. Now these are going to fit various versions of the 1999 to 2010 Ford F250, F350, and F450 Super Duty. To confirm that these are going to fit your truck, take advantage of our vehicle fit guide here at etrailer.com and input the year, make, and model of your truck and our website, our fit guide at our website, will let you know if these tie downs will work for your truck, or if we have something comparable that will work for you.

Now, the frame mounted design ensures excellent handling because securing your camper to your truck's base, instead of its bed, better distributes the weight to keep your setup from being too top heavy. The brackets fit tight to your truck's frame. So there's not going to be any loss of ground clearance and the rust-proof and lightweight aluminum alloy tie downs are going to insert to these durable stainless steel receiver brackets. Now these inserts can be easily removed from these frame mounted brackets. I'm just going to go ahead and remove one of the bale pins here.

And as you can see, the insert slides right out. And again, being aluminum, it's very lightweight but very rugged, as well. So this is going to be very easy to take the inserts and maybe throw them in the rear of your truck cab and they can be there and ready to use when you next need them. But they're not going to be any trouble whatsoever to remove these. I do want to point out that this does come with vinyl caps that are included to cover the front of the receivers to keep out dirt and grime.

And also foam plugs that insert into the rear of the brackets to keep out dirt and grime, as well. So as you can see, you can remove the insert, put the cap on. It's going to keep the inside of that receiver clean. And these tie downs are going to be virtually undetectable when they are not in use. Now I do want to point out on the inserts, there are two different holes.

And if your camper is a little bit wider, you can just use this first hole on the insert to have the tie down stick out a little bit farther. If your camper is a little bit narrower, you can move it into this second hole. And that's what I'm going to do here, is just slide that all the way into the second hole, line up the holes here, run that bale pin through, and that is going to secure it in place. These bale pins, as I mentioned, are going to secure these inserts into the brackets, giving you a nice secure connection point for your turn buckles. The high impact powder-coated finish is going to add an extra layer of protection to the brackets and the inserts. And you're going to get everything that you see here on the table before me. You're going to get two front tie down inserts, the frame brackets, the necessary hardware for installation, along with instructions to guide you through step-by-step on the installation process. Now, again, these are front camper tie downs. The rear ones are sold separately. But if you are in need of the rear ones, as well, just go through our fit guide here at etrailer.com to find the ones that will fit your truck. These are made in the USA and they do have a lifetime warranty. Well, that's going to conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..