Most Popular Gooseneck Hitch To Fifth Wheel Trailer for Nissan Titan XD

Love this hitch. It has performed great with my 17,000 lb trailer all year. A very stable and reliable platform for towing. Easy to set up and plenty of adjustment to get the trailer just right. The only negative is the weight, not the easiest to get in and out of the truck by yourself.

Click to Enlarge

I decided to buy the Champion fifth wheel hitch to pull a fifth wheel camper, my 2004 Dodge Ram 2500 already had a B&W goose neck hitch in it. The champion hitch allowed me to also have a fifth wheel hitch with out drilling and mounting more weight to the truck. The instructions for assembly were clear and easy to follow making the assembly of the hitch easy. The hitch fit snug and there is no play in it. The 26' fifth wheel camper pulled nicely, no surging or swaying.

Click to Enlarge

The assembly seems very stout and sturdy overall. Was able to put the unit together in truck bed quite easily. will know more in upcoming weekend when fifth wheel trailer gets pulled home

Click to Enlarge

Click to Enlarge

Click to Enlarge

I was a bit disappointed because when I installed the hitch per instructions, it still allowed a movement on the hitch. The hitch would actually move 1-2 inches when I would brake or accelerate the vehicle while towing. I researched and found that it was a common issue and some people were advised by etrailer technical support to torque the attachment bolts tighter. I did this as well, but with the same results. So as a result I don't pull the fifth wheel very far and am look for a solution to the issue.

I got a email to review this so here I am. The attachment to the bed in fantastic. I rate it at 5 stars and an it’s very easy to remove quickly. The king pin lock does not work very well after about 6 months of use. I typically have to reach into the locking mechanism to get it to release properly. Other than that is has not cracked, rusted or bent since I’ve owned it. I live is the high desert so it does not see much rain or snow.

Click to Enlarge

Click to Enlarge

Works as intended for it use. Biggest complaint would be the moving pieces of the hitch seem to have some slack and have since it was new.

Click to Enlarge

Product will not lock in to place . Mount system shown is exactly what it said needed to be but rails are flush against the bed of truck and shaft is still about 3/16 to 1/4 inch from where the locking pins slide threw.

This product fits my fifth wheel hitch well and fits in the truck hitch as well. Have not pulled with it yet as winter storms are here. I expect it to work well. Expensive for as simple as it is. Hoping it is built well. Nice That I was able to get a used one at a reduced rate. Missing the pads so we’ll see what kind of a difference that makes. Very happy with etrailer as a distributor. They make the purchase easy and quick free delivery. They Always follow up on my satisfaction with my purchase’s.

Superior design. Superb build quality! The B&W Companion slider ticks all the right boxes for me! The instructions are well written with helpful diagrams that make them easy to follow.

Well made product, very heavy. The slider was Well worth the money, avoiding damaging my new truck. The toyhauler was easy to maneuver in reverse.

Great product! Ive pulled a 42' to Hell and back not one problem. It is heavy, but it's very solid. My fifth wheel hitch fit straight in. Way cheaper than having to put rails in if you have a factory ball hitch in the bed. Its It's also nice that it's removable so you can haul furniture, or things that can't sit crooked ect. Great product, should last forever. Definitely would recommend

Click to Enlarge

Received the Curt X5 B&W turnover ball adapter yesterday. Would have been easier to drop in with two people but I was able to do it myself. Dropped right in, and in less then 15 seconds it was dropped and locked. Saved me lots of install time on 5th wheel rails. Set my RBW lil' rocker hitch on and pulled my 10,000 lbs 32' 5th wheel across town without issue. I feel that this is probably the strongest way to go when running a 5th wheel to turnover ball adapter, and its only about $*** which is a fraction of the cost for those other weird complex adapters that side load or flex. Customer feedback was great with optimal response time on my questions.

Click to Enlarge

I am very impressed with the quality of this BW 5th wheel hitch. I chose it because it what is recommended for use on my new flatbed for my truck. The flatbed is designed with this hitch in mind. It fits perfectly in the gooseneck well and is easy to install/remove. Just tighten/loosen the tension bolt and slide the locking pin to switch from gooseneck ball to 5th wheel. Going with this hitch and a flatbed makes trailering so much easier. No more step ladders, standing on running boards or tire to reach the hitch handle. Just reach over, grab the handle to open/close the jaws and set the safety pin. Highly recommend it.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

What a great hitch ! I had purchased a 5th wheel RV about three weeks ago and thought without a doubt that I would be drilling holes in flatbed and be paying 1500 to 1800 to have a hitch installed. Thanks to B&W I was able to install this hitch in less than an hour with no other expense other that the hitch itself. Our first trip cover about 400 miles the hitch had absolutely no slack or play in towing. A great product . Precision made in the USA, Thank you !!

Click to Enlarge

This product is spot on, I installed it immediately and have used it twice. This product was an awesome option to purchase because of already having the B&W turnover ball system. This gave me the ability to install and the Curt Q24 slider to give the maneuverability needed when pulling a fifth wheel with a short box that the Anderson hitch did not provide. I have already used the slider option twice, it works flawlessly. Prior to the purchase of this Demco I purchased the Curt X5. The X5 did not work with my truck at all. The X5 did not even make contact with the bed of the truck for support. This Demco base to rails fits tightly to the bed of the truck. I have 2007 Dodge 3500. It is a short box mega cab.

Click to Enlarge

Click to Enlarge

the Base rails work good but I gave it a average rating because the shipping was terrible, It looked used when I received it, the cardboard was about gone when I received it. It was dropped many times, the edges were rolled over from being dropped and the paint was very scratched.

Took 2 minutes to install. Works great, I had it hooked up to my fifth wheel 2 hours after UPS delivered.

Heavy and doesn't fit flat on my truck bed, had to add some heavy duro rubber shims between this and the bed floor. I paired this with the C611-624 gooseneck hitch.