# 1
K-Source Universal Towing Mirror - Clip On - Convex Mirror - Qty 1
After years of replacing mirrors from other sources I purchased a pair of these. There fantastic, plenty of adjustments. Got covid on vacation, really sick and did not properly install mirror. Not broken but scratched badly from asphalt at 55 mph. Purchased a replacement, scratched one is my spare.
These mirrors are good, but not great. I bought these because nothing else fits my 2004 Ford Expedition. They allow me to see around my trailer much better than the factory mirrors, but the have a slight vibration driving down the road. They also make a very noticeable noise from the wind going between the factory mirror and this product. Finally, one of the straps came off when I tightened it a bit too much, but didn't break. The picture below was done in humor (I took my trailer through a drive through, thought it was really funny, and had to take a picture. The picture is a good shot of the mirrors.)
# 2
K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair
These worked great on my wife's Yukon. Installation instructions were clear and direct. They held up very well traveling 75 mph down the interstate; No jostling around or coming loose. I loved the additional two mirrors. Having the three total different angles while pulling a trailer was extremely helpful. Would highly recommend this setup.
ordering was easy. the product was delivered quickly and without damage. I have a 2023 Colorado Z71 and was concerned about how the towing mirrors were going to attach to the tapered factory mirrors. the fit is superb. no movement during use so far.. I would recommend these to a friend.
# 3
K-Source Universal Towing Mirrors - Clip On - Convex Mirror - Qty 2
After reading lots of reviews on several mirrors, I decided to buy the K-Source Universal Towing Mirrors. Oh how I wish my truck could use the ones that slip over the existing mirrors! I was prepared for a fight, based on reviews, and boy did I get one! I truly needed a third hand when figuring out how to attach these. I was bound and determined that I could do this on my own. No mirrors were going to defeat me! I did ask my husband to come look at them. He started to help but I shewed him away. After a lot of words that don’t normally come out of my mouth and a few tears, the first one was on! Then I had to go do it again in the other side! I’m pretty sure the neighbors heard me yelling. But I persisted! Lo and behold, this 67 year old Grammy did it! It was clear they would not stay on by themselves, so I grabbed a couple of bungee cords and wrapped them around the housing and they aren’t going anywhere. I have left them on my truck. No way I’m going thru that every time we return from camping. I will take them off at the end of camping season. Delivery was really fast. I was disappointed that one box was brand new and the other was smashed and taped, an obvious return. I would have been very unhappy if there was a piece missing or if something was wrong since this was my first purchase with etrailer. Overall, the mirrors work, they do not shake and I find I don’t use the truck mirrors now. Very happy with my purchase.
Fitted on 2024 Toyota Tundra SR5 CrewMax Cab w/ Stock Mirrors No vibration issues with either mirror. Turned left and right side clip on mirrors vertical so the did not overlap truck mirrors. Right side no problem with attachment and was able to adjust truck mirror. Could also see father back along right side of a 24’ travel trailer than just looking in truck mirror. Don’t expect to see behind on right side any vehicles tucked up close. Left side mirror attachment had to be modified so I could adjust truck mirror without interfering with clip on mirror lower L “hooks”. I put a rubber blocks under the lower L hooks so they were low enough to get under truck mirror glass yet still clamp to truck mirror housing. A picture tells the story. 7,000 km/4,200 miles later and neither mirror has loosened or moved. No vibration or distortion. Yes, I ran 2 zip ties as safety “chains” from the back straps to truck mirror arm just in case, they’re barely snug. I recommend these.
# 4
K-Source Universal Towing Mirrors - Clip On - Flat Mirror - Qty 2
I went right away to try them on my truck. I have a 24 Denali ultimate 1500 Denali and I have a couple of cameras on my side mirrors. The straps are easy to maneuver around the cameras to avoid issues there. Good snug fit I have not taken it out yet to test these in real road conditions but so far so good.
Worked well and as expected. Still can't see as far behind the camper as I would like on the passenger side. Strap them on tight. They shook very litte but some, not enough to be bothersome. Later,I did find them less expensive elsewhere, oh well. Straping them on is tricky to not cover the cameras underneath the truck mirrors. Truthfully I use the camera on the back of the camper along with these mirrors and get additional views from the Chevy cameras as well. I'm not a truck driver and only pull the camper on occasion so I need all the "eyes" I can get especially driving through Nashville and Atlanta.
# 5
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
The Mirrors arrived on time and fit my 2012 Dodge Ram Laramie as advertised. Also the installation video was very helpful. However I gave the 4 star rating because the mirrors were shipped in the manufacturer's original box and the box arrived damaged. Fortunately the mirrors were not damaged. This shipping practice is not up to etrailers standards.
Great product. Great price,and a perfect fit on my 2019 Ram 1500 Classic Big Horn truck mirrors. The Etrailer site is very informative and I was confident when ordering the product that it would work for me. Shipping was fast and includes a tracking feature that actually works! These mirrors give me more visibility when towing my camping trailer and look like my truck came equipped with them. Easily removed when not needed. Very pleased. Thanks etrailer team. ,
# 6
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
Finally an add on mirror that works great strap on ones from (another site) suction cups from (another site) useless I am very satisfied with my purchase of these.I can change lanes and back up with confidence now and didn't have to spend dealer price for extension mirrors money well spent !!!
I’m couldn’t be more pleased! Easy to install and very stable they don’t interfere with the working of the factory mirrors and even allow the turn signal functions, highly recommended
# 7
K-Source Snap & Zap Custom Towing Mirrors - Snap On - Driver and Passenger Side
Fit my 2019 Chevy Suburban perfect. Easy to snap on/off without any tools or adjustments. I have a 7.5' wide enclosed trailer that I pull some dirtbikes in. It works perfect. Gives me just enough to see further behind me. Not sure how helpful they would be for an 8' wide box. Works for me though. I definitely recommend them. Blend right in and look clean too.
I purchased this because there wasn't an alternative side mirror extension that form fitted my Yukon Denali side mirrors. All of the other units I tried looked like UHaul add ons. They vibrated while driving and just looked tacky. These fit nicely. Are a little difficult to snap on but not prohibitively. I do remove these when I'm not towing my camper so ease of removal and installation are important to me.
# 8
K-Source Custom Extendable Towing Mirrors - Electric/Heat w LED Signal - Textured Black - Pair
These are Quality Mirrors, very sturdy. Took me about an hour on the first side, (learning curve) but the second side was 1/2 of that. Makes the truck look great and can't believe what a difference they make for field of view. As for function my truck was set up for the turn signal and power mirrors and they work great.
The service from etrailer was great like always. These mirrors are for our 03 Yukon for towing a travel trailer.They are condsiderably larger than the OEM mirrors in the collapsed position, the once extended they are almost twice as long. The only problem I had is the directions are a bit generic and tell you to pry the power window switch panel from the door panel to access the wiring. The picture supplied shows the lock panel being pried off which is correct but the power window is screwed in from the backside so the door panel needs to be removed and then reach behind it to remove the wiring.
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"