# 1
Rhino-Rack Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I have had a Rhino Rack on my Ford Explorer for a year and travel many miles as a ski racing official. The installation was quick and simple and durability has been impressive. I would definitely recommend these racks.
Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!
# 2
Yakima FreshTrack 6 Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
Looks great on the vehicle. Had a little struggle tightening onto the cross bars but adapted and overcame!
It's a ski rack so its not all that exciting. I like that it is small for storage reasons when not using it. The fastening system to my Toyota Highlander factory rack is secure but a little cumbersome to apply and take off. I like to take it off when not using it to preserve my gas mileage. The boards and skis fit fine although they are stacked in order to get 4 peoples worth of equipment up there. A small price to pay for their compact size on the roof or in the garage.
# 3
Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
I'm completely satisfied with my purchase from etrailer. First, the company provides terrific support, from installation instructions to responding quickly to questions. Second, the carriers are great. They are easy to install and remove. I am confident they are securely installed and my skis are safe. I wasn't worried about them as I drove down I-80 in Wyoming at 80mph. Having the skis on the roof made it possible for me, my wife, our infant son in his car seat, our dog, our cat in his carrier, and our luggage to fit in our car so we could enjoy a week-long ski trip in Utah. The only reason I held back from giving a 5-star review is the noise. I might be able to reduce it by moving around the rail inserts or adding an air dam. I'll report back if either of those work. Until then, I'll happily and confidently keep using the carriers.
E trailer I have a 2019 Mazda6 and purchased the rhino rack series 2500 parts (fit kit #DK289, foot pack #RRRLKVA, aero crossbars#RRVA126B-2), and the rhino rack snowboard/ski carrier #RR576. My car does have fixed mounting points underneath the strip on the roof so I opted to add them to my roof and not use the clamp for kit that goes in the door jam. Every time I entered the year, make, and model of my car, the parts came up with the clamp fit kit part #DK387 which I did not want. But after some research, I found the correct fixed mounting point fit kit. The site of course told me that this part wouldn’t fit my car but after looking at the customer reviews, I saw them used on Mazdas. All of the rhino rack instructions were not the best. We did have to make some adjustments. One of the instruction packs tells you how long you’re supposed to cut the rubber pieces that go into the crossbars based on your car but unfortunately, the measurements were wrong for my car (picture- front 166mm is wrong). The front bar length was about an inch too short and I had to add more rubber to make it longer to fit the fixed mounting points on my roof. After some time of trying to interpret the instructions, and looking up whatever available instructional videos were online, we finally finished installing them and they do look really nice. At higher speeds on the highway I can definitely hear more noise. The actual snowboard carrier is fine, fits all 4 boards fine. It is a little difficult to close once I have my boards in there because you have to push the top bar all the way down and hold it down to be able to turn the key to lock it. I’m just happy I don’t have to shove the boards in my trunk. I do like that all the parts in this series come with locks and keys. So far no problems. Overall good product.
# 4
Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Very well built. I like it so much I purchased the larger EVO 6 model too for when the this one isn't enough.
I actually ended up buying a second set so I can fit a total of 8 pairs of skis on my jeep. I love the quality and ease of installation. It’s an easy to use system and love that my skis are secured.
# 5
Kuat Grip Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Black
Rack works great. Slide out makes loading and unloading much easier. So far we only put five pairs of fat skis on. Might have room for one more pair if I closed the gap between pairs but we didn’t need six pairs for that trip. Only problem was the rack froze up after driving through fresh rain. We had no problems with freezing while driving through salted slush. So far we’ve used it on two longer ski trips to CO from AZ. It’s quiet and strong. We once had a cheaper rack release our top model, expensive, skis onto the highway at 65 mph. That’s why I bought a Kuat.
These rack are great, I have them on both of my SUVs all winter. The etrailer seevice was excellent as well.
# 6
Thule SnowPack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards - Silver
So easy to install onto Thule AeroBlade. Quality materials and convenient design. No significant noise noticeable from wind resistance when driving. etrailer provided great shipment/notification support and was great resource for how-to videos, commentary.
Better than I expected. Only comes with four core locks so be aware of that if you want six like I did. Bought two more locks from Thule with the same key #. Mounted this carrier on my Rhino Rack. Perfect fit and looks great. Would highly recommend.
# 7
Kuat Switch 6 Ski and Snowboard Carrier - 6 Pairs of Skis or 4 Boards
Been a great purchase. Fits 4 pairs of skis and a snowboard with room to spare. Could probably fit 2 boards and 3 pairs of skis easy.
Excellent ski rack. I purchased because I wanted absolutely no noise. This thing is super quiet went flipped up or down. Love the looks of it flipped down. Absolutely no complaints. Easy to use and set up.
# 8
Rhino-Rack Ski and Fishing Rod Carrier - Locking - 2 Pairs of Skis or 4 Fishing Rods
Last year I purchased Rino ski racks from etrailer and they work great . The hardware fit my roof racks and all the fittings are tight. Ordering was easy. Shipping was fast and I even got a follow up personal email from George a year later asking how I liked them - which was impressive! I would definitely recommend etrailer as an honest and good outdoor gear company!
My second Rhino Rack. I use the racks for skiing and fishing pole. I travel a lot and have never had a problem with them. The Installation is simple and can be completed in under 15 minutes. Etrailer was cheaper than amazon, didnt charge for shipping, and I got the rack a few days after ordering. Would totally recommend etrailer.
Yakima FatCat Ski and Snowboard Carrier Review - 2013 GMC Yukon
Today on our 2013 GMC Yukon well be test fitting the Yakima FatCat 6 locking rooftop ski and snowboard carrier with a six ski or four board capacity, part number Y03088. To begin our test fit well place the front half of our carrier onto the front bar. Well bring the rubber coated straps around the crossbar fitting them back into the foot of the carrier. Well use the clamping lever on the strap to secure it in place. Once we have it fit back into the foot of the carrier well go ahead and clamp down the lever thats on the end of the strap. Well do this for both sides of the carrier.
Whispbar Roof Ski and Snowboard Carrier Review - 2013 GMC Yukon
Today on our 2013 GMC Yukon we'll be test fitting the Whispbar locking rooftop ski and snowboard carrier with a 6-ski or 4-board capacity, part number WB-300. To begin our test fit, we'll place the front half of our carrier onto our front crossbar. We'll bring the rubber-coated straps around the cargo box, fitting them back into the foot of the carrier, pushing them into position, and repeating this process for the other side of the carrier. We'll grab the second half of our carrier, and place it onto our rear crossbar. We want to make sure that it's in line with the front half of our carrier. We'll bring the straps around the rear crossbar, fitting them back into the foot of the carrier, and pushing it down into position.
What our customers are saying:
"very easy to shop"