# 1
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
I used these to mount a vintage 1970 Avion C-11 to a 1993 D250. They worked great and were much stronger than I expected - and it was a huge cost savings (and a much more attractive look) than some of the frame mounted options of more than $1000. There were some oddities that I noticed. It was impossible to mount them exactly the way the instructions suggested because of where on the wings near the cab,. The brackets also could not stay on with the camper unloaded because they would hit the jack mounts, meaning they had to me bolted in after the camper was in the truck but before lowering the jacks, making the access to the bolts a frustrating 'feel for it' experience.I'f suggest the manufacturer secure the bolt so that you don't need to hold both sides when tightening/loosening, and also refine it to need less turns to do so. It took me 2 hours to mount the first time, and not much less when removing them with the limited access. The pads also came off in the first use. I gave it a 5 star because I realize there are limited options for older campers and anything universal is going to have issues with some thing - so that's just my input and experience. Overall pretty reasonable for the price and functionality.
The product was shipped extremely quickly, it arrived 3 days after I ordered them. As far as the product goes I was extremely pleased that they were as easy to install as the product video showed them to be. I had been looking for a tie down system that would work for my 2018 Ford since I purchased my camper in 2020 and after much research I found these at etrailer. One word of advice is that if your camper has a shower or other design that allows the camper to extend across the bed behind the wheel wells, either move the rear tie downs forward or shorten the leveling stud before you attempt to load your camper. On mine it turned out that once the tie downs were placed and attached I had to cut off about 3 inches of the threads. Other than that it was an easy install although the bolts that attach the tie downs to the under lip clamp are a challenge to install but take your time and they will go on. I will post an update once I have been on the road for a few trip and see how they are working. Thank you etrailer for your super fast shipping and online product videos.
# 2
Brophy Stake Pocket Mounted Camper Tie-Downs - Bed Mount - Qty 4
Used these on my 2012 Tundra Crew max Had to put in more effort in the installation then the instruction tell or show. for example the truck pockets where these slide into I had too cut the plastic that was covering the holes, I removed the tail light on one side to get the top bolt screwed in. I had to remove the gas cap and plastic to secure the top bold. I also added bigger washers cause there are existing hole that hold the factory plastic so the nut couldn't slide out and away. Other then that these mount work great
Not compatible with 99 Ford F-150, even though the description said it was. Stake pockets are double walled on this truck. Bolts too short. Very frustrating.
# 3
Brophy Slide In Camper Tie-Downs - Extra Clearance - No Drill Bed Mount - Qty 4
Easy to put on they work perfectly very solid I have a 20-22 palomino SS 1251 truck camper Badland Edition doing a great job thank you a bunch
The Brophy tie-downs work just as advertised. I am a recreational user of my camper - not full-time or long trips, and have had no issues with them. The only challenge is backing my truck under the camper with the brackets mounted - like threading a needle, because the leg stands barely clear the brackets. I have a 2-16 F-250 and a Northstar 650 and their is not enough clearance in the bed to add the brackets after the camper is in position. Again, this is not a problem with the brackets, its a camper leg/stand and bed width issue.
# 4
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
First of all, etrailer was amazingly communicative in the delivery process, which was greatly appreciated. And these tie downs were such a straight-forward installation. Start to finish, I would 100% buy from etrailer again! Highly recommend.
The tie down kit is very high quality, and the installation instructions were spot on. Our truck is in mint condition and I wanted a tie down system that was low profile, and did not take away from the looks of the truck when camper not on it. I've not used the turnbuckles yet, but they are set up ready for work and look great.
# 5
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Good product. I would not recommend for large campers with stock rear bumper, the bumper will get bent. I have an aftermarket steel bumper and this makes for a good secure mounting system for the rear mounts. The front mounts on my 2022 Ram 3500 crew cab were very difficult to slide up into position, absolutely a two person job, but also very tight fit causing some hidden paint damage. Overall a good product, I like it's discrete mounts that stay on the truck between uses.
works as it should and when not in use it is out of the way
# 6
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Zinc Plated Steel - Qty 4
Quick delivery and my box was in good shape:)
# 7
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
I am extremely happy with this setup. Installation *could* be done by a single person, but would involve A LOT of figuring out special approaches to holding things in place for alignment and tightening. But I had a friend help me and installation went about as perfectly as one would hope for. I have used the oriduct for multiple trips, sone of which were on washboard gravel and dirt roads, and the setup has worked perfectly. My truck camper is a popup and pretty light, and the setup holds the camper in the truck very nicely. I suspect it would work very well even for heavier and larger truck campers, as well. I called support before ordering and was provided with perfect information in a very professional and caring manner. I am 100% satisfied, and highly recommend both this product and etrailer as a company.
I use this in A 2007 Silverado 1500 Classic with a 6.5-foot 1996 Lite Craft. Works great, and it was easy to install.
# 8
Brophy Slide In Camper Tie-Downs - No Drill Bed Mount - Qty 4
At the moment I have yet to install the tie-downs. However they arrives when etrailer stated and the boxes were in excellent condition. I expect to use them this weekend to pick up my new to me slide in truck camper.
Delivery came early and the box had all the parts . I still have to install the tie downs but seem pretty straightforward process
# 9
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Very satisfied with customer service! And purchase. The sales staff know their products very well. We had a Blip with my delivery but again the staff Rose to the Occasion. Thank you, great doing business with you !
What our customers are saying:
"Received already. Yeow! Perfect fit. Thanks for getting the kit to me so quickly."