Most Popular Trailer for 2022 Ram ProMaster 3500

Just what I needed to mount the spare on my Class C with the Ford E450 chassis.

Poor design. No matter what, using the furthest hole on hitch it WILL rub. If you like the finish worn off your tailgate or wall of a trailer the slanted design is not practical. Also need to create something to prevent wobble once installed. Read the fine print on the return policy you will pay for freight return. Good Luck

The product is simple and sturdy. It took 5 minutes to install. My tire is a full sized 16.5” rim with tire and six lugs (3.5” on center Lug spacing) and it fit without a problem. The weight of the tire is nearing its high end of weight capacity. Overall great. My only concern is the bolts mount “inward” toward the boat. It would be helpful for some rubber plugs or some alternatives or I might just reverse the bolts so the tire blocks the bolts remaining extension of threads. Even still it’s simple and easy to install. Check out the end result, (you can’t even see the mount) tire and cover.

Arrived quickly and worked perfectly! Very rugged.

This was exactly what we needed. It is very well-made and it sits nicely into the hitch with absolutely no wobble. The only reason I gave it four stars was because of the difficulty in aligning the bolts to attach the spare tire. They are free floating so they can be setup for a variety of tires. But this makes it very difficult to align the bolts and try to tighten at the same time. I solved this by making a paper template of the holes from my spare tire. Then I bought 3 jam nuts and 3 washers to secure the bolts into position before lifting the tire in place. Now that the bolts are secured in the right alignment it will be easy to remove and replace the tire in the future. It would be a very simple thing to add these instructions and supplies to the kit.

Well built, hard to lift 200LB tire and get the carriage bolts to align. The M12 retaining ring would not hold the bolts. Used a ATV jack to make slight lift and wiggle bolts into location. I'm 62 work smarter not harder.

Absolutely rock solid product for spare tire mounting. Clean, finished look and comes with ample mounting hardware to accommodate multiple size trailer frames and both 4 & 5 bolt wheel patterns. Match all that with super fast shipping. With n win. Highly recommend.

Great mount for my spare wheel/tire that I mounted on my Triton PWC LTWCI trailer!

Adam from E Trailer was great to work with. Directed me to the correct products. Placed my order and the items arrived within time they were supposed to. I highly recommend E Trailer. I have purchased other hardware as well as electrical wiring harnesses from them and everything has been as advertised.

Great build quality......works as advertized.

I think this mount is going to work out just fine. I like that it gives the option of being a solid mount or a drop down/pivot type. I chose to use both bolts and make it solid. The only thing is that if I wanted to use it as a pivot type, the retaining pin was the wrong size. But it all worked out.

I have a Class A and tow a dolly. My dolly does not have space to attach a spare tire. This spare tire holder mounts perfectly on my rear bumper. It's out of the way, easily accessible and looks good.

I know some will agree, not agree, or don’t care about this post. It’s about having a spare tire with you in case the worst happens and you need one. I just had new tires on our class C 2017 Sunseeker. I changed the spare also, since it was 7 years old as the ones on the rig. Never had an issue with them, Michelin tires, but felt age was the deciding factor. I went with General Tires, with the hope that some of the mushy feeling might diminish some. And it did!! The sidewall is a little stiffer than the Michelins, thus giving a stiffer ride also. Can’t have the best of both worlds yet in tires, but I’m happy with the stiffer ride. Now to the spare, mounted under and behind the rear axle. I always check tire pressures before a trip, even the spare. Never really noticed how it was mounted; just thought it would be let down like a lot of my pickups I have owned for years with a cable. Nope!! One stud bolt and nut, that is all. It was mounted solid, but to drop the tire down was another story. It took 3 men at the tire shop to lower that tire assembly, it weights 80 pounds. That 16” rim and tire was very awkward and heavy for those men. What would happen if I had a flat and needed the spare, looks like an accident waiting to happen for 1 person to do by themselves. I now have my spare still mounted under the frame, same spot, but with a cable assembly I bought from eTrailer. Much easier and safer for anyone to lower the spare tire anywhere. Had to do a little modifying to allow the spare tire to be mounted with enough clearance to access the turning stud on the winch. Welded 4 spacers blocks giving 1-1/4” clearance so the spare tire would be snugged against them and allow the space clearance needed for the turning shaft. I used ½” emt conduit, ½” pvc coupling and a 1-hole ¾” strap clamp to secure the emt conduit in place on the rear bumper. The ½” conduit is just large enough inside diameter to go over the turning stud on the winch, yet loose enough to allow movement like a universal joint since it is not in perfect alignment. The conduit is attached to the winch stud with a 5/32” cotter pin. I welded a 3/8” drive short extension to the inside of the conduit to be able to use a ratchet, speed handle or drill motor to raise and lower the spare tire.

Spare tire winch seems well built. I got a little creative with the install.

I love working with etrailer they always have what I need. I haven't yet received all of my order, hence the 4 stars due to the fact that I placed my order on 4/27, and it's now 5/25. I know I know "supply chain shortages", what can you do, right?!

Great product, fits perfect on my trailer as described, no vibrations or rattling. The only thing I would recommend is that they would include the two lug nuts required to hold the tire, or at least provide the size nut required (1/2"/20). It would have saved me the trip to get the two needed.

Had an issue with the bolts and bracket for the wheel mount. The square part of the bolt that goes into the slot is too short and or the rectangle squared hole that those bolts go through is too big…. Very hard too tighten with the wheel on, keeps spinning.. Ended up getting New bolts with a better head for the holes. Maybe make just square holes for the carriage bolts instead of a slot. My bolt is on the left in picture, yours on the right.

Work great with my 13 inch tires and fit perfect on the trailer

The tire mount arrived quickly and in perfect condition. It is very sturdy and constructed well, but like others have stated it wont fit a square rv bumper without some modification. I used a jigsaw with a fine tooth metal blade and cut the two holes out larger on the mount then drilled the holes on the plate with a 1/2” drill bit to align with the modified square holes on the mount. See the picture and it will make sense. It’s too bad they didn't just design it to fit a 4” square rv bumper in the first place, so thats why 4 stars. But with a little easy machine work and some silver spray paint to touch up it works. Its the only solution for getting the spare tire to sit up on top of the bumper and not behind it so you can use a rack and it’s expensive but solves my problem.

Pictures showing measurements are incorrect, inside measurements are 3-1/2” not 4” as stated. I had to modify bolt holes to fit a 4” square tube bumper. Mount is installed and looks like it will work for me.

Solid product, welded on to the front of a utility trailer I was rebuilding. Worked great.

Great products and fast shipping. Excellent fit and easy installation.