# 1
Dexter Trailer Springs Over-Under Conversion Kit
Great kit! Installed this on my 1995 Jayco Fifth Wheel and it really improved the ride height with my truck. It’s been on 2 round trips from Texas to Montana since and many other trips locally with no issues.
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
# 2
Torflex Lift Kit - Tandem Axle - 3-1/8" Lift
Fair Price, fast shipping. Thanks etrailer!
Prior to installing this kit, I was unable to remove my tires without first deflating them. The same went for reinstallation. The kit works perfect and was easy to install. I'd recommend it for anyone needing to raise their trailer.
# 3
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
The package arrived quickly as they said it would. I installed it as per the instructions and the job was easy. My Trail Lite Camper trailer has tandem axles so it was easy to just drive one set of axles up on ramps and install the lift kit on the hanging axle with the trailer hooked to the truck with the brakes locked on the truck. Anyhow, this lift kit was easy to install and did the job of raising the rear of the trailer from 14" to 18" after installation. Everything fit perfectly thanks to talking with Alex of etrailer.com and getting the right kit for my Dexter #10 Torflex axles. Attached are some pictures of before the install, during and after the install. I'm very satisfied. FYI the project goes a lot faster if you have an electric or pneumatic impact wrench to remove the old rusted mounting bolts and installing the new bolts.
# 4
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
Installed on a 2017 NuCamp Tag XL. Needed a little extra head room for the kitchen clamshell. Install was easy with basic tools, a couple jack stands, tape measure and some red loctite. Lift height is as claimed because it directly lifts the axle. Product has worked great, nothing has come loose or shifted. Stability towing has not changed. The only trouble is the wiring for the fender light is a little tight but that is a camper issue, no fault of the lift.
# 5
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Fair Price, fast shipping. Thanks etrailer!
The trailer is a Palomino Solaire 147x. Installation was straightforward. The lift in combination with taller wheels and tires accomplished the desired ride height.
# 6
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
Fair Price, fast shipping. Thanks etrailer!
I think the lift kit is a very stout piece of hardware. I'll be installing it on Friday on an Airstream camper. Will give an update on how well it fits after the install. I gave 4 stars because the packaging could be better - almost lost some bolts or nuts. The delivery person had to tape it all up - must have fallen in travel and busted open.
# 7
Dexter Trailer Springs Over-Under Conversion Kit
The lift worked out perfectly,I had the place where I bought the trailer install them because I didn't have a welder to weld the saddle mounts to the axle and that's a must for a safe installation,also I had the place where I bought the trailer do it because they had the capability to align the axle perfect to the trailer after the installation. The lift added approximately 5 inches to the trailer hight so I could install the off road wheels and tires.The lift didn't affect the handling of the trailer at all.
Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!
What our customers are saying:
"very easy to shop"