Most Popular Hardwired for 2020 Honda Pilot

I just did the installation on my 2012 GMC Sierra 1500. Installation was fairly easy for this broken down man thanks to the video's that you share! I didn't know what the quality of the monitor would be but I was impressed! The small sized monitor will not be in the way of my view. I placed it on the far left side on my dash. Now I can hitch up to my camper without getting in and out of my truck a half dozen times! Thank You!

Everything works well with the camera and display. The adapter that ties this into the trailer wiring for the display so it knows when you are in reverse does not allow the trailer brakes to work! Yikes! I had to do a roadside disconnect with a full trailer and no trailer brakes. I removed the adapter and rewired it directly to the reverse light wiring after getting home. All has worked well since. You definitely need to check this before using this kit out on the road. The display is a little small but that is what I was looking for. I just wanted to see the hitch ball for hookup.

No problems. Works as advertised. I use to have a wireless camera, but that would disconnect now and then, or pick up some ones security camera when driving by. Wired connections are the way.

WORKS GREAT...smooth install with the helpful video on your website

I was looking for something that was very pleasing to look at it and this fill the bill. Easy to install with plenty of instruction and lots of video examples. I already have a back up camera but needed something that alert with sound and it works great so far.

Stopped working and when it did it wasn't that accurate. Now it just doesn't work at all. The beeper is not that loud when it is in the panel of the hatchback.

I just recently purchased and installed the hopkins camera HM60195VA and say I love it. It's an easy install for my dodge challenger and helps out beyond words when backing up. The install only took about an hour and if your not really looking you can't tell there is a camera there. The wiring was simple and plenty long enough and the monitor looks like it belongs there. I highly recommend this set up.

This is one cool gadget , it was also easy to install it only took me 30 minutes. I did share this already to my pastor, to my brother and also to my brother in law. Im not tall of a person standing only 5'7 it was a bit of a challenge for me backing up im driving a 2006 f-150 , so when I saw this online I immediately order it.

Still happy with my purchase after one year. It is a quality item I installed in a 2009 Honda Pilot for which install I wrote a guide on the Pilot forums. Cheers!

I bought this because my daughter and I had both backed the truck into the camper parked in the driveway. So far, it has worked for its purpose. It does not work as well as the factory setup in my Ford Escape. The main problem is seeing the image in the rear view mirror when the sun is bright. I also need to put on my reading glasses to see the image clearly (if I could drive with the seat back another 3 inches I would be fine). The auto-dim feature of the mirror works great. After the initial install, I moved the camera from over top of the license plate to the bottom of the bumper beside of the hitch receiver, having cut a notch in some of the plastic trim so it would not block the view. That was a huge improvement. When installing on a mid 2000s Ford Superduty, there are some good videos online for removal of the A-pillar trim and grab handle. There is a wire under the dash related to PTO functionality that provides power only when the key is switched on that you can use to power the unit. Run the cable to the camera under the sill plates (these are in the bottom of the door opening) to the back of the cab before exiting to the underside of the truck. Coil the excess wire here and zip tie it. When having major engine work done, point this wire out to the mechanic in case he has to lift the cab to do the work -- there will be enough extra wire to allow him to do this without disconnecting anything.

The camera is of high quality, as is the rearview mirror and monitor. I did have to return the first mirror because the bracket didn't match my 2013 Ram 1500's windshield mount, even though it was listed as a universal fit. The Ram has a triangular type fitting. I tapped into the reverse light wiring for power. l ended up having to replace the incandescent reverse light bulbs with LED bulbs because the monitor image flickered badly until I installed the LEDs. I think this was because the BCM (Body Control Module) got confused with the additional power draw. Since then the camera and monitor have worked flawlessly. It provides a great view behind the truck, even at night. Because of the placement on the bumper it doesn't have a good view of the hitch ball, but I don't tow very often. Overall I have been very pleased and feel that the camera is well worth the price.

Outstanding parts knowledge and a high quality products!

My wife rode with a friend for lunch who had a new car with a back-up camera. She was really impressed and was talking about buying a new car to replace her 2011 Ford Escape that would have the backup camera. I found a video showing how to install the camera on an Escape by etrailer. I was impressed by the company and bought a unit. It arrived quickly and I was able to install it following the instructions I had watched. It took me a couple of hours to install, the hardest part being fishing the cables to the rear of the car. Once installed it worked great. My wife is very, very happy with the install. She says she is much more confident in parking her car. Thanks a lot. I would, and do recommend etrailer and the back up camera kit.

im very pleased with the product (camera & rear view mirror) takes a little work to get the cables run through your vehicle (f150) and finding a good power source (my problem) had one issue with a cable mfg took care of it over all had it installed for 1 year very happy got it manly for conecting to our travel trailer but use it all the time now

Overall, the installation went well. The video helped lot. I chose to not use the clips on the console, and mounted it underneath on the top of the bezel around the instrument cluster. The on/off switch was kind of hard to get to, so I incorporated my own switch on the dash. By running a separate ground wire through to the dash to that switch, I was able to achieve this. I use the on off switch when hooked to a trailer. This unit seems to fill my backup sensor needs, without an extra effort to install. Works pretty good too.

My order arrived quickly and was pleased with the cost. The installation video on the website is informative. I have yet to install the back up sensor system but expect it to go smoothly. Purchased for a 2019 Ford Transit 250.