# 1
Hopkins Active Tail Light Converter with Install Kit
I have ordered from Etrailer several times over the years. Always have exactly what I need. Good prices and fast shipping. Could not be happier. This wiring harness was perfect. Installed it in a few minutes. Thanks.
Excellent. The only down side for my Lexus RX300 was not having an “easy” way to mount male 4-way next to hitch rather than stowing it beside tire bay. No big deal just a plus.
# 2
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.
# 3
7-Way Molded Connector w/ 10' Cable - Trailer End
As described. Got this one because of the design of the connectors as I’m troubleshooting an issue with wiring. Colors matched the rv-style one I took off my camper. The moulded plug housing is a little shorter than the one that came on the camper so it doesn’t fit in the little storage thing the same way. Functionally seems great.
I upgraded my trailer from hydraulic to electric brakes and rewired everything to neaten and freshen up things. Its a nice piece. I recommend.
# 4
Adapter 4-Pole to 7-Pole and 4-Pole
Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.
I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).
# 5
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
Replaced the wiring and lights on my 1992 boat trailer. I was able to get everything needed from etrailer. I think Optronics is of the highest quality and recommend both etrailer and Optronics product.
Works very well after re-wiring trailer lights with waterproof distribution box.
# 6
Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights - Trailer End - 24"
Great product! Wired this harness up with my trailer wires and have not had an issue since. A quality product!!
Worked as advertised. Easy ordering,fast delivery.Very satisfied.
# 7
Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket
This is the product I expected and it arrived in factory new condition. To no fault of etrailer.com the currier wagon train and the ox’en that pulled the load were heading East. This was not the direction they were accustomed to so it took a few extra days. All in all good job I will do more business with this company.
I wish than all trailer wiring was color coded the same. I have wired a lot of trucks ant trailers and trouble shot problems and always solved the problems. this one gave some serious thinking since the wiring was color coded different. But it is working and I do like the Pollak plug.
# 8
7-Way Molded Trailer Wire Connector, 4' Long
Worked great for my application. The wire colors for 7 way plugs aren't universal so I had to pull up a pinout of a 7 way plug and ohm out the wires to the plug to confirm what went where. But the quality of the plug is excellent. After a year of use on a salt water boat trailer it works great. Just makes sure you heat shrink your butt splices and a little dielectric grease in the plug goes a long way.
When I ordered this harness I thought I was getting a standard 7 way for a conventional trailer with brakes. What I actually got was a harness made for a camper/RV hook up. The wires have all the colors you would expect but all the lights/turn signals are coded into the plug completely different. After spending a good deal of time carefully matching, soldering and heat shrinking all connections to my new trailer harness, I was very dismayed to find only the brakes actually worked. After a bit of research I found a schematics page on the etrailer site and discovered the problem. As this is a molded plug I could not take it apart and just reposition the wires inside the plug. Another full hour or more of rewiring followed and now all is well. The harness itself is of very good quality but was not labeled/identified properly. This could have been prevented if etrailer would clearly label this harness as a camper/RV harness only.
# 9
Hopkins Tail Light Converter with 4-Way Flat Trailer Connector
I used the Hopkins 3 to 2 converter to make a 6-pin round to 4-flat connector for my Winnebago View motorhome. While there are 6-4 plugs available to do this, they do not work on the Winnebago View (no brake lights). This adaptor works great.
This device was no help in connecting my five wire trailer to my four wire goldwing. I ended up having to use a number of diodes in the trailer wiring to make everything work properly. My trailer had red LEDs that were used for Brake, Turn & stop and I had to get the brake and turn function to share the same lead on the light fixture.
# 10
Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 8' Long
Very solid, heavy duty trailer lighting cable
Really quality piece. Plenty of length to connect back to the rest of my utility trailer wiring that was still in good shape since it was in an area subject to far less abuse. Nothing worse than having to fix the corroded wires in between replacing the worn out plug every few years. This should give me years maintenance free service even with the toll winter takes.
# 11
Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End
The cord is awesome that it is flexible in the cold weather . Fair price for what I wanted .
Junction box and cable install went well. Unfortunately, didn't arrive until late in the day and had to be done with lamp and flashlight! Bit of a challenge figuring out wiring of lights but finally figured it out. Just sold the RV to a first timer and referred him to etrailer for a ball mount, ball, and trailer brake.
# 12
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
Just what I needed for my home-built bike carrier. My wife rides an e-tricycle and by the time I loaded the trike and a couple of bikes on this platform, you could not see the car's taillights or blinkers. This harness worked perfectly!
Harness is made well. Installation was vey easy.
# 13
The website was the first indicator this would be easy. Logically laid out, suggestions for complimentary hardware, good photos and demo video's to make selection easy. The ordering was easy, I received timely updates, who actually worked on my order and again, timely updates. Order arrived quickly and is exactly what I needed. No drama, just received my order promptly. What more could I ask for?
E-trailer: they've got what I need at a reasonable price. This is what e-commerce should be!
# 14
Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter
Simple and easy to use; just plug it in and connect it to the trailer harness. Works like a charm!
Not installed yet but looks as good as one used before in a former vehicle. The actual adapter I received is "Reese", which is a reputable brand for towing accessories.
# 15
6-Pole Square Trailer Wiring Connector Kit (Car and Trailer Ends)
Bullet-proof connector, if not the most elegant. Used in my case for custom "adventurization" wiring on my 2007 BMW F800ST motorcycle, now just road tested this late summer - early fall 2017 on a three month, 18,000 mile loop out of Chicago through the Arctic & Pacific Northwest, including the Dempster & Dalton Highways. Had a custom wiring harness that had to be able to be removed in order to get at the engine, hence the need for the connectors. A few photos should be attached.
This is a product that I needed for my project, but was not easily found and available. etrailer.com not only had the product, but had it at a great price. Shipping was very fast and free for the amount I ordered. Overall, this was a great shopping experience. I made a bulk order of 16 as I am manufacturing trailers that are towed behind motorcycles. This product gives me the six conductors that I need in a very small package, which is great due to the size of motorcycles compared to cars or trucks. The only thing that could be improved with this product would be if they came with dust caps for each connector, or at least one for the vehicle side to prevent dust and moisture intrusion while the trailer is not in use. Keep up the excellent service and selection.
# 16
48" Long 4-Pole Loop with Cover
I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.
The items I ordered will allow me to adapt my utility trailer for transporting my sea kayaks. Curt and Hopkins are both quality manufacturers. On a shipping note, the box arrived at the Post Office broken wide open. Your shipping folks need to wrap small, heavy, items in bubble wrap. Then stabilize it with foam peanuts. Just putting it in a box then stuffing the box with craft paper does not cut it. Items were not damaged so I am good to go.
# 17
Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
Arrived quickly. I didn’t need to wire the extra lead to my reverse lights because my trailer doesn’t have surge brakes or backup lights. Simply plug and play.
Perfect for converting 4 wire Ford Expedition trailer harness and boat trailer to 5 wire. The Expedition had a backup wire run to the area of the 4 wire plug so made the conversion easy.
# 18
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.
What our customers are saying:
"Fast Shipping They are AOK Thanks"