# 1
Fit Kit for Thule Podium-Style Roof Rack Feet - 3142
Parts were great for fit and function. Instructions total FAIL. Purchased new roof racks in three boxes: feet, podium, and rails, three unique sets of directions, all very poor in clarity and actual steps. For a premium product this is very disappointing. Installed them consulting third party videos and forums with anecdotal information, not what I would expect to have to do for the money I spent.
Fit could be a little cleaner on the factory rails, but they do the job.
# 2
Landing Pad 18 for Yakima SkyLine and Control Towers - Qty 4
These towers (Y00148) and the Landing Pads (Y00244) are needed to mount the cross-bars on my 2015 Jeep Grand Cherokee. The Jeep has flush rails, with an open channel along the top. They are very heavy duty, typical of Yakima stuff. Worked great.
Easy to install. Not impressed with the fit though. The biggest selling point is being able to remove the towers and leave the pad though. Overall happy with the purchase.
# 3
Rapid Traverse Feet for Thule Crossbars - Naked Roof - Qty 4
Got a 2020 Grand Cherokee with the black metal roof side rails. I had planned on using the 60" Aerobars with the 460R pedestals, but oddly the bar didn't have long enough mounting points. So after talking with these folks, I opted for the 480R instead. While they 'technically' worked, the rack sat way in front of the factory rails. I did a LOT of talking with Thule and others and finally opted to get the 69" Probars. They work with the 460R pedestals, fit into the factory side rails and while I did have to get them cut down to 60", have enough room for everything I need to mount. So, my only compliant is that both Thule and etrailer don't seem to have the Probars listed as an option for the Grand Cherokee. They are the best option, especially if you have a Hullivator. And they look great!
It’s OK, The product is well designed and does the job, but looks a bit clunky on our all-black Jeep Grand Cherokee. This retro-fit option does not have a sleek, streamlined appearance like a factory install. If you’re going for a sporty look, then you will probably like this product.
# 4
Custom RCP Fit Kit for 4 Rhino-Rack RC and RV Series Roof Rack Legs - Fixed Mounting Points
Purchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
Greg S was awesome! I was on quite a few different manufacturer websites trying to figure out the best solution for my sons Jeep Grand Cherokee . He’s a snow boarder and we wanted to get him the complete roof rack solution. I came across the etrailer site and noticed they had sales and tech support . Greg answered the phone and helped me determine the best solution. He took the time to send me links for everything Called me back later that night to assist with my order placement . He even emailed me to let me know when it arrived and to follow up. Very pleased with the entire process. We will install after the holidays and I’m confident if I need any help they will be there for us!
# 5
RCL Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4
Purchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
Great bars. It's my second pair. Both on jeep Grand cherokee. The pair I put on my 2015 overland didn't whistle at all. This pair I put on my 2020 trailhawk whistled starting at 20mph and changed pitch throughout the acceleration process and while causing. I bought a fairing and the problem is solved. At least for now. I put the fairing on wit the label in. Looks better and Rhino Rack isn't paying me to advertise. The fairing they recommended seemed small but works so go with whatever they recommend.
# 6
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
Fit my 2019 Jeep Grand Cherokee with the appropriate other feet and bars that the site listed. Install took about 2 hours total. The 'VA' measurement for feet position was about 9mm total off from a perfect fit, so I re-positioned them and it fit snug and looks GREAT. Hoping to get some use out of the rack soon.
Awesome product! Fits like a glove on my 2021 Jeep Grand Cherokee Limited X. There is a slight whistling noise, but otherwise couldn’t be happier with the overall package!
# 7
Inno Feet for Square Crossbars - Track Systems, Flush Side Rails, and Fixed Mounting Points - Qty 4
Excellent quality rack adapter. I have used Inno products for a number of years and they are just as good as Thule or Yakima and lower in price. I am using these feet with a square bar system I have had for years. Got a new vehicle with different rails and was please that there were adapters available from Inno.
This Inno rack is a sturdy, basic rack. What I like best about it: - It actually mounts to the roof tracks on my 2015 Jeep Grand Cherokee (with the INTR132 fit kit), instead of to hard points on the roof like many other racks. - It lets me use my Thule bars and accessories because Inno and Thule bars are the same size. - It was much less expensive than the other racks I looked at. - It is pretty easy to put on and take off. What I don't like as much: - The locking covers that go over the towers are pretty flimsy, and look like they are on crooked even when installed correctly - This rack is quite noisy on the Grand Cherokee, but I think that's just the nature of the rectangular bars. (But since it is easy to take off, I plan on only putting it on the car when needed). Also, thanks to the folks at etrailer for helping me figure out what would work best for my needs!
# 8
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
Fit my 2019 Jeep Grand Cherokee with the appropriate other feet and bars that the site listed. Install took about 2 hours total. The 'VA' measurement for feet position was about 9mm total off from a perfect fit, so I re-positioned them and it fit snug and looks GREAT. Hoping to get some use out of the rack soon.
This kit adapts the crossbar legs to my Jeep Grand Cherokee. Top quality parts, excellent fit with clear, easy to follow instructions. Measurements are included in this kit for ideal roof placement of the legs.
# 9
Custom Fit Kit for Inno XS300, XS350, XS400, XS450, INTR, and INXR Roof Rack Feet
I had been looking a very long time for a roof rack for my 2014 Jeep Grand Cherokee. I wanted round or tubular crossbars, different from the “air foil” style, which were the only kind available from the factory and the many imitators. I finally found etrailer, and these fit the bill perfectly. The attachments fit the rails just like the factory model, and hold the rectangular cross bars firmly. A sturdy and solid product. And even with free shipping they arrived the morning of the second day after I ordered them, in time for the trip I was planning to take with them.
# 10
RCH Legs for Rhino-Rack Crossbars and Pioneer Platforms - Fixed Mounting Points - Qty 4
The small square plates had defective threads. Plus, it was difficult to get the legs lined up with the crossbars. I could not tighten the crossbar bolts in place due to lack of space. I had to remove the crossbars to tighten the assembly.
I bought this kit because I already owned a pair of Thule “square “ crossbars. When in place the rack is super solid. However, it has some issues. It is quite difficult to attach the legs to the base plate on the factory rails. It doesn’t click on and off. Quite annoying. A fiddly two person job. Also the wind noise is very noticeable. Also annoying.
What our customers are saying:
"very easy to shop"