# 1
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
I installed these on my 2018 Toyota Tundra myself. As advertised, they fit into existing bolt holes and installation was straightforward. My slide-in camper attached as advertised and the unit has been trouble free through some rough off road travel. I recommend this item highly and prefer it to my previous camper tie down system.
This was a perfect fit on my 2017 Tundra. Installation took about 30-45 min per side. The most difficult step was threading some bolts through the frame holes. They hide nice when not in use.
# 2
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
A bit challenging even for a person with a lot of experience with tools. They want you to fish the bolt and washer through the frame and the mount at the same time, not going to happen with only 2 hands so i went to ace hardware and got some neoprene washers to slide over the bolts to hold them in the frame holes, then gently slid the mount onto the bolts. The drivers side bolts cannot be fished through the tight turns inside the frame with the washer attached to the bolt so getting the washer on the bolt while inside the frame was difficult. I was also concerned that my side exit exhaust would be in the way but as shown in the picture it wasnt an issue.
I recently purchased tork lift camper tie down for my 2012 tundra. shipping was quick,while waiting for my tie downs I put some blaster on my bolts and let it do its job. I did the job on the ground with the help of my son. Totally installed in a little over 2 hours. Great product as are the other items I've ordered from etrailer. I certainly will use and recommend your services to others. Thank you
# 3
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
The front tie down mounts did not fit my 2008 Toyota Tundra SR5 5.7 L V8.The problem is that the bump stops attached to the rear cab mount bolts are in the way. That is something that cannot be removed permanently to accomodate the tie downs. The arm that bolts higher on the frame needs to be bent at a greater angle to fit both the frame and the cab Mount bushing.The rear fit perfectly.
They hold on well so that campers doesn’t fly off.
# 4
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Very satisfied with the customer service at etrailer....some research had to be done and the .representative came thru..the camper tie downs were what we needed
these fit my '21 toyota tundra perfect. It took a little bit to figure out the instructions but once we got one side, the other side went well. two of us installed front and rear mounts in a little over an hour. I had Torklift on my 2002 tundra and they were very secure for my slide in, that's why I got them again for my new truck.
# 5
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Rear tie downs for my 2001 tundra little more complicated to install than front by myself because you had to wedge between of tight access and old hitch receiver and frame. Although, once installed… worth every penny. Having camper attached to frame makes for less too heavy and more off-road capable. Drives fine in wind at 75mph
Extremely pleased and satisfied with the customer service I received. When there was a problem with getting my product they contacted me on Sunday and took care of all my needs. Thank you so much.
# 6
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Product did not fit correctly need modifications spoke with TorkLift. They are looking into the problem. Very disappointing would not buy again.
I purchased the torklift kit for my 2008 Tundra. Fits nicely, with no major problems. Getting the nut with the handle and the bolt together through the brace took some ingenuity. Once that was solved the installation went well. I would recommend this product to others.
# 7
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Kit came early, installing it this weekend thanks to Brian for the prompt response on the emails
# 8
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Waited a year to buy these. Torque lift true frame mounted truck camper "brackets" I had an unusual truck...Tundra 2015 longbed single cab.(somewhat rare). PERFECT FIT! The amazing part: ordered on tuesday TWO DAYS later there here! Thanks Etrailer, I will buy my next items (fastguns) anchor "binder" kit from etrailer soon . Thank you.
It does fit a 2021 tundra 8’ bed!!! 19 mm box wrench needed for installing Drivers side.
# 9
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Product fit perfectly, easy to install, very happy.
# 10
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Great product, installed last night! Only suggestion I would have is info on the items page regarding install fitment. I was going back and forth in which model to get because unsure what hitch type I had. All my questions were answered once I opened the manual that came with the product and saw the picture! Would suggest including those pictures of the installed mount on the website.
# 11
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Fast, friendly service. Great quality
the rear set also fot the 2021 Toyota Tundra CrewMax with minimal modifications. Nobody claims any fitment for these on the rear of a CrewMax, but i GUARANTEE it fits. Mine works great.
# 12
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon.
All parts arrived in good condition. The Torklift part you recommended was the exact fit, installation went well.
# 13
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.
fit pretty good and the device for getting the bolts in tough places was brilliant
# 14
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Delivery was fast. Works perfectly for our Lance slide-in camper.
I originally ordered the incorrect rear Torklifts camper hold downs for my truck. However, I called etrailer and explained my error. They not only helped me pick the correct ones, they sent them out that day. I haven’t installed the rear TC hold downs yet. I was most impressed with the free shipping both ways with no questions asked! I was issued an RMA and the refund came quickly. Very good customer service in an age when there often isn’t any service , let alone great service. The front mounts fit perfectly!
# 15
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
I put these on my F250 for when I carry my Northstar Camper and they have made an enormous difference, especially in sway. They work!
You should make the front angles a little longer for the top of the frame of the truck but thank you very much all done
# 16
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
The hitch fits perfectly. Shipping was very fast and packaging was excellent. etrailer communication is the best of any other on-line retailer i purchase from. Installation was a little frustrating as the adhesive used to hold spacers did not hold well on the slick surface of the powder coated metal which had to be placed between the bed and cab which is a very tight spot. Instructions were good and the included pictures helped since the part fits many different trucks. Only needed simple hand tools and a drill. Placed a thin piece of plywood between truck cab and bed when drilling to protect the cab.
First of all, etrailer was amazingly communicative in the delivery process, which was greatly appreciated. And these tie downs were such a straight-forward installation. Start to finish, I would 100% buy from etrailer again! Highly recommend.
# 17
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
High quality product. TorkLift customer support is excellent. They mistakenly sent me two left inserts for the tie-downs. A quick call to customer support and they sent the correct part right out. Photo shows camper and truck before installation of TorkLift tie_downs.
Strong unit far better than bed mounted jnits.
# 18
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
My brother installed these and he used air tools. The brackets fit perfectly. The instructions were thorough. They bolted right in and the only delay was the disconnect/reconnect of the e-brake cable to install the driver's side bracket (2019 RAM 3500). After all the parts were laid out, he installed all 4 brackets in an hour. He commented many times on the weight, high quality and PERFECT FIT of these brackets. These are worth the price and made in the USA.
Easy to install. Took less than an hour with no helper. They are very sturdy and I expect them to last. 2020 RAM 3500 with OEM hitch.
# 19
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
These tiedowns were exactly as advertised and fit my 2023 f350 4wd crew cab perfectly using preexisting holes and mounts. They even came with wire feeders to feed the bolts through the holes on the frame. Instructions were very good and easy to follow. Can adjust the width of tie down and can also drill new holes to customize the width. I highly recommend these.
The package arrived very quickly and intact. I have a 2020 Ford F250 SD Lariat short bed with a factory hitch. The tie-downs were really easy to install although the hitch adapter plate (see attached photo) which is supposed to attach to the end of the tie-down would not fit inside the tubing on my factory installed hitch so I installed without it and it is tight and snug
# 20
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Easy to install. Camper was only off my truck 2 hours. Better handling and more secure than pocket stake system. Only downside is drilling holes in exterior truck body, not a problem for me and blends in pretty well.
These parts are probably going to be great, but I won't know until a week from now cause I had to order the rest of the parts from a competitor because this website decides to play games to get my business. Ordered something that said it was In stock, order gets placed, then it says it's waiting on stock? It was Instock when I placed this order, and now I have to wait for Saturday? I guess I can wait. Come Saturday and it's another month delayed. I could have had it delivered Saturday from a competitor when I originally placed my Instock order if this website hadn't lied to me. I will not be spending more money here and will be very vocal that others should avoid this website too.
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."