Most Popular CURT for 2017 Ford F-150

So far everything has worked out great. The hitch was received quickly and the assembly was very easy, with directions very clear. The hitch installed into the existing rails as the person who helped me said thy would. I have not yet hooked up to my 5th wheel because it is in storage for the winter but as easy as it works I have no doubt it will work great.

Super fast shipping! The hitch fits into my pre installed rails like a glove! Couldn’t be happier.

This can be easily put together and installed by one person. I had to put the base into the universal rails loosely and then torque the bolts to spec. This hitch was an upgrade.from the autoslide hitch I originally purchased for my 5th wheel. The noise and banging has disappeared. This hitch was well worth the money. I also purchased the custom fit wedge for my pinbox. I don't believe I could be any happier with this hitch.

I was very pleased with the Curt A16 5th wheel hitch. Unfortunately I ended up buying a new truck.(I no longer have a need for this hitch). My new truck has a shorter bed which requires a different hitch.

Nice kit. Came with everything I needed to install.

We have the turning point pin on our rig so we had to get a wedge. I don't know if it was the wedge or the hitch but unless we were perfectly straight and level, we couldn't hitch up. Same with unhitching. After the 3rd time of not being able to unhitch without taking the entire head of the hitch off, we locked up the turning point and got a new hitch and do not use a wedge. Also, with only a bar going across, the pin seemed to wiggle around a lot.

Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.

I’m very happy with the ease of ordering and the information videos that Curt had available before I made my purchase. When I received myQ24 hitch it was great quality and very easy to assemble it also works better than expected. Thank you etrailer

Very good quality and well made fifth wheel hitch...No problems

I bought a new trailer recently that weighs 16k and I just didn't feel secure using my Reese pro series 16k to Haul with. So I started looking at various hitches. I've had 3 other fifth wheel hitches in the past. All of them have been 15 and 16k models. What I never liked was the latching system. I've even had a trailer come out of the hitch due to a poor latching hook up. There wasn't an good way to lock the hitch. Some of it was my fault and some was a poor design. When I saw the Curt Q20 had a latch on the handle and also was color coded I was hooked. This hitch satisfied my want list. It arrived 4 days after I ordered it and like other comments I've read it was full of heavy duty staples. It was double packaged. There had to be over 50 staples. It was defiantly packaged securely. After dimantaling the packing I finally got to the hitch. There were a few scratches on the hitch from all the staples but a bit of black touch up paint took care of that. After all the hitch is going to be used and get scrached by me anyways. Four bolts and it was together. It fit perfictly it my existing rails. By the way it's heavier than my other hitches. I wound be apprehensive to pull my new trailer. If your looking for a great hitch at a great price you can't go wrong.

Excellent on all levels. Fast shipping via right company.

Very well built but thats CURT. When towing very quite and stable.

Easy to install, great quality

Doesn't operate as easily as I hoped. Sticks when trying to slide which means jumping in and out of cab many times. Also its heavy as it should be,but it doesn't come apart easily for removal in two pieces that can be lifted separately. You need a winch to remove it safely. Its a pain in the you know what. I like my old two piece hitch better. I could take it in and out in a few minutes, but it won't work in my new f350.

Install was easy and the hitch performs perfectly. I have ZERO complaints. Even a year later, it performs great.

Shipping was extremely fast and all the extra information that can with the products I purchased made the entire experience that I would return for and refer friends to.

I received my #20000 curt hitch with slider rail a couple of days ago. The problem is I received two slider rails and no top hitch. I called etrailer to inquire about the shipment. The folks on the line were very helpful. They reordered the hitch head and made arrangements to have the extra slider rail picked up at my house which will happen in a couple of days if all goes well. Mistakes happen and I will see how it is corrected. I will wright another review when the hitch head arrives.

A great price shipped fast via freight. No issues with broken boxes as many others have mentioned. First fifth wheel for me, assembly and install into the factory Ford pucks was amazingly easy. Do not know for certain if the slider will be necessary for our new Arctic Wolf camper. We may swap out for stationary legs if we can get away with it. I love etrailer!

I traded my Curt 16k slider hitch for this new crosswing It definitely moved my trailer back 5 inches and I do not see the need for the slide hitch I rarely used. It is lightweight and easy to manage by yourself ( my old one was just too heavy ) The new hitch has nearly eliminated all of the chucking and bucking.

The Crosswing hitch arrived promptly from etrailer. The hitch is of good quality and functions well. Etrailer customer service has been great throughout! Highly recommended.

Curt A16 with Slider base for Ford OEM Pucks I went through a good bit of anxiety after trading my 2013 F-250 for a 2018 F-250 due to the height of the 2018. I did not pay close enough attention to bedrail and rear height and I was beside myself sick over it so this review might be a bit long while I explain my journey. I replaced a 2013 F-250 4WD with a Reese Pro Series 16K square tube slider universal mount with a 2018 F-250 with OEM pucks. I pull a 2015 Prime Time Crusader 315RST. I measured, I had boards with levels, mock up on hitch height, I read every forum and article I could find and still I was worried I had made a big mistake. Finally, I called eTrailer and talked to Molly and she had, (or went and got) plenty of answers as I had narrowed it down to the B&W BWRVK3370 20K Companion Slider and the Curt A12. I decided to not go for the “the most expensive is better” and went with the Curt A12 saving me about $300. The 20K B&W was the smallest they had and with an F-250 I would never really come close to that weight before I passed the GCVW limit so it made no sense. The Slider base for the Curt says it is the same base used up to 24K so if I ever do I can just buy the new head I believe. Ordered on a Saturday it arrived on Thursday at noon. No issues with shipping at all, the hitch came in 2 boxes strapped to a pallet. No damage like others experienced. Assembly took me about an hour because it is heavy and awkward to line up the slider linkage but all in all nothing too difficult. I set the hitch head mount at the 2nd from the bottom (18 inch) hitch height because I had measured the truck and camper and was worried about having 6 inches of clearance camper to bed rail. Turns out on a 2018 F-250 4WD at the 18-inch level on the hitch I have 8 inches all around and 7 inches at the highest point on the tailgate. After I installed the hitch and put the camper on the truck and applied weight I got about 3-4 inches of squat, which made the already rear high truck sink to near level. I do have more nose high attitude on the trailer than I had before but it was not terrible. I moved the height adjustment down to the 17 inch (lowest) today to lessen the nose high attitude by another inch and I have 6+ inches clearance still. The hitch. Like I said before I had a Reese Pro Series 16K slider and it was noisy as hell. Kingpin clunk starting and stopping, creak at every bump and turn. I put the Curt A16 in and took the trailer for a drive with the rear slider window open and heard nothing. Absolutely nothing. No start/stop clunk, no creaking, nothing. Hook up was very easy and the interlaced kingpin jaws make visual check very easy. Operating the slide takes a bit more effort but it worked fine and locked securely. It did not latch back to maneuver and then back again to towing automatically like the video without jostling the handle a little but I am sure it will once broken in and I grease it a bit more. The puck system was easy to adjust and make a solid connection to the truck with no play. I could not be more pleased with the hitch. Cons- The hardware was packaged like one would expect and it was all there but the bolt for the center connection of the slider linkage was different than the handle and passenger side joints. It is too small and caused a lot of play. I used it anyway but it allows play in the handle and not firm for unlatching. I will replaced it today and now it works great. eTrailer is now my go to store for trailering supplies.

2017 F250 curt A16 slider Ford prep package

I have ran a cheap competitor hitch for several years. A manufacturing defect (welded pivot pin) caused the hitch to fail and resulted in 18000$ damage to my truck and trailer. I chose the Curt 25000# hitch after much research and found it to be very well made and clearly shows when it is properly coupled. It is quiet and operates with minimal klunking and chunking going down the road. Overall I am very pleased.

Mounted this hitch on my flatbed 3500 Ram and the hitch works flawlessly. Pull 44' tri-axle weighing in at 23,000# with ease. Very easy to use and understand, very easy to maintain.