# 1
Dexter Trailer Springs Over-Under Conversion Kit
This product did exactly what we needed it to. Bought a replacement axle from Dexter but it created clearance issues in the wheel wells. After installing this kit we have much more clearance and the trailer rides like a dream.
Outstanding product. I am so grateful the install video was added to the page. I am a hands on individual and struggle reading directions with numerous steps at times and it made it so much easier to install this. The explanation of how the mount has to sit flush with the axle seat once you tighten down the spacers was very helpful during the alignment stage. I still have to weld the brackets to the axle for extra support as recommended but I did notice that I will be gaining roughly 4” of clearance height to my trailer. This will allow me to sit more evenly with my lifted truck and get my trailer in my driveway easier since I have a water drainage built in to the entrance way with a big dip.
# 2
Torflex Lift Kit - Tandem Axle - 2-7/8" Lift
Just had these installed on our 30' Airstream Globetrotter and it looks great. The extra lift gives us the ability to explore more BLM areas and boondocking opportunities.
The package arrived with a tear and the hardware bag busted so a washer was missing. Contacted trailer and they sent out a replacement right away.
# 3
Torflex Lift Kit - Tandem Axle - 2-5/8" Lift
This trailer sees some use off pavement. The added ground clearance provided by the kit is very helpful. The lifting blocks are well constructed and the hardware is high quality. Installation was straightforward, but great care must be taken when lifting the trailer off the ground to remove the axles and also to ensure that the new fasteners are tightened properly. Not a job for inexperienced mechanics.
This kit arrived packaged very well and exactly as described. Inventory of included parts complete. It will be a straight forward job to install and solve my problem of having the trailer too low at the rear since I can't lower my hitch any further. I recently replaced both 20 year old Dexter #10 Torflex axles with 10 deg down vs 0 deg down spindles. I am glad for the improved ride instead of basically a solid axle, but still needed this kit to solve the angle of the trailer because I'm as low as I can go with my weight distribution hitch at the ball.
# 4
Torflex Lift Kit - Single Axle - 2-5/8" Lift
Perfect fit for the 2020 Geopro 19FD with the 3500# torflex axle. This resolves the issues with bottoming out on any road ramp angles and the ultra low tank discharge ports. The parts are really well made and the installation is simple. Be prepared for the 150 ft-lbs of torque on those bolts. (Always use a torque wrench!)
Straightforward instructions, only had to extend wires on my 2022 E-pro bunkhouse. Follow the instructions to the T and it’ll take a handful of hours. I’ve lifted a jeep and two trucks, so have lowered axels before, this was a piece of cake. Had to also adjust my equalizer hitch but after having two busted pipes from traveling, hoping this keeps them away from those deep potholes. Only time will tell! I installed on my own and love the result! Before and after lift pictures attached.
# 5
Dexter Trailer Springs Over-Under Conversion Kit
Kit worked as intended. Raised my fifth wheel high enough to get proper clearance over bed on new truck 3" Axle tube 2.5" Spring stack gave me 5.5" of additional height. I also added bump stops on top side just in case a spring breaks.
Jaime at ETrailer was extremely helpful and got my order sent up ups ground since I was having issues using a P.O. Box. My parts arrived quickly and fit perfectly. I installed them last week and my trailer looks so much better and won’t be scraping on my driveway anymore!
What our customers are saying:
"Quick processing, and delivery. reasonably priced very satisfied"