Most Popular K Source for 2015 Ford Edge

I haven't road tested it yet, but it seems to strap on as well as could be expected from a universal fit product. Seems like the car mirror will still function and the straps will not damage the finish on the mirror. I used some rubber pieces from a bike tube to play it safe. Seems like an additional strap wrapping diagonal around the mirror on the edge closed to the car would mitigate risk for slipping off the tapered mirror.

After years of replacing mirrors from other sources I purchased a pair of these. There fantastic, plenty of adjustments. Got covid on vacation, really sick and did not properly install mirror. Not broken but scratched badly from asphalt at 55 mph. Purchased a replacement, scratched one is my spare.

Click to Enlarge

I purchased the KS3990 Universal Dual Lens Clip-On pair of mirrors and found them to be easily installed on my 2016 F-150 Ford truck mirrors. The on-line help video for the 2016 F150 was helpful. They seem to be fairly well secured onto the existing mirrors, which are NOT actually rectangular in shape, as was portrayed in the video. In addition to the upper outside corners, the lower horizontal edge (towards road) has a slight upwards tapering effect. I have test driven the vehicle with the 26 ft. travel camper in tow and the mirrors seem to provide much improved visibility on both sides. We will be taking a weekend trip in the near future to confirm that these mirrors are completely adequate.

Click to Enlarge

Click to Enlarge

Click to Enlarge

They fit my 2017 Ford Edge well. They stayed secure (I did add a couple of small bungees just as a safeguard). Drove from Colorado to Oregon and back and hit some really bad weather, the mirrors worked fine.

Mirrors vibrated at speeds above 50 mph. I repeated attempted to tighten them but I could barely make out vehicles in the curb side mirror. I replaced them with mirrors that clamp onto the bottom edge of the factory mirrors.

these towing mirrors fit my 2021 ford edge great thanks again

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

I installed these on my 05 chev, they were hard to get snapped on the bottom so I used a small trim tool to pry them out far enough to hook over the edge. It was 30 degrees out when I was installing them and the did not crack so that is a good product. They vibrate going down the road but still better than not know what is behind the trailer.

Easy off and on. The fit on my outside rearview mirror is outstanding. Works great with my 24' Thor. The inside edge of the added mirror lines up perfectly with the outside edge of trailer. Very pleased with the product

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

Low cost way to extend mirrors. Does not interfere with mirror movement at all. Also still keeps turn signal visible. Only removed 1 star as it is easy to scratch the plastic on the edge of the mirror housing facing the window when installing or removing the mirrors.

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

Out of the box, the mirrors didn't fit properly. I couldn't get the bottom snaps to fit over the edge like they are supposed to. So, I just used a heat gun to slightly soften that area and expanded it just a little. That did the trick. It takes some effort to unlatch the bottom clip so I'm confident the mirrors will not fall off. It's a good design. The actual reflective part of the mirror is easy to adjust and has a greater range of movement than my last mirrors - the ones that fell off. We are looking forward to getting on the road in a couple of weeks for a real test.

Works great. They do work with the F150 mirrors that have the turn signals on the outside edge of the mirror. You just can't see the turn signal with the towing mirrors installed. Fit is excellent, no rattling or vibration. Easy 5 minutes installation.

Very good quality construction. Very good fit for a non-custom mount. Thick rubber straps are stretched over the car’s side mirror and hold the mirror well. My car is a 2017 Ford Expedition EL. Note: when you fold in the car mirror the towing mirror partially blocks the progress so that mirror stops early. It is still folded but not as completely as without the tow mirror. And yes, they are two identical mirrors so on one side the straps go up, on the other side they go down.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

BUYER BEWARE!!!!!! I had great hopes for these mirrors. They look great. They appear to be very adjustable right out package. They fit on my Tacoma securely. They don't interfere with the function of the stock mirrors. Everything was moving along "swimmingly". Then I sit inside my truck to do the final adjustment (moving the actual mirror to get the correct setting and lock it into the "sweet spot"). The new Mirror is very stiff...doesn't want to move. Well, its new...so....Okay, I don't want to ruin anything...so.... No worries, I go get a phillips screwdriver to loosen the back screw a smidge so the friction adjustment can work . Come back start to back the screw out just a smidge...nope...still can't adjust the...wait...unscrew some more....that's not an adjustment screw at all. That just screws directly into the back of the mirror to hold it solidly in place. Worse yet, There is no friction mechanism on the back of the mirror at all. It is one solid piece of plastic. The molded plastic replicates the look as if it has the ability to move, but in reality....There is no way to do small mirror corrections once you have this thing installed. What the Actual people?????!!!!!!???? If you can't do minor adjustments to the mirror while you are in the vehicle, then the mirror is completely useless. I wouldn't recommend this product to my worst enemy. It's a piece of crap. DO NOT BUY!!!! A complete waste of time, money, and shipping costs. Now, I have to incur more shipping costs to send this POS back to etrailer. Hey, etrailer....Do Better next time!!!!

Click to Enlarge

Click to Enlarge

Click to Enlarge