Most Popular Triple Axle for 2015 Dodge Durango

Exact replacement part. Post office had a hiccup so it took a week to get my parts but etrailer shipped it right when I ordered. Thanks etrailer

Exact duplicates of the stock Dexter equalizers. Removed nylon bushings and replaced with steel bushings with wet bolts.

This is a multiple product review. The long bracket are good. The shorter brackets are of the same good quality. The issue is using the short brackets with the shackles. The shorter brackets could be narrower so the shackle line up better with spring and other longer bracket. We used washers to make it align better. The greasing bolts are good, but could be longer. so we could only use 2 of the 6 and had to use normal grade 8 bolts.

we plan on doing more business our trailer seem to be a hit see attached photo

These were a direct replacement for my 25 year old dump trailer. I removed the plastic bushings and used brass.

The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP

Your knowledge of the parts was excellent my trailer is an older model and I was concerned on receiving the correct parts. Thankfully they are a prefect fit and the delivery was right on time. Thanks John

The equalizer bar was a perfect fit, replaced the rusted out original, exactly. E trailer also had the best price and cheapest shipping...which showed up 2 days faster than expected!!

Worked great for a 3500# dual axle Stealth Apache snowmobile trailer. Informative dimensions in product description. Removed the included plastic bushings and installed MR46ZR MORryde upgrade kit.

Product seems to be of good quality. It's been one year with no problems.

Need to be stronger as do the axels. Despite being under the max load for the Malone mega sport and not traveling at over 60 mph when towing I have now had 2 1500lb axels and this is the 3rd set of hanger brackets as they crack on the sides and the axels bend partly die to poor conditions of the roads but also due to under engineered for the job and weight intended. Apart from the the mega Malone megasoort has held up. Suggest a better design for the mega sport as it’s intended for outfitters not occasional use.

Work as spected

Great service great part and very good communication from the seller!!!!! Highly recommend using them for any and all trailer parts needs they most likely have what most don’t! Thank you trailer your doing great!!!!!

These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.

Overall, the brackets are as specified and appear to be a quality metal. I’m not sure if it’s by design, but the inside width of the legs at the bolt holes are slightly wider (1/8”) than the inside width at the top at the bend. But I guess that is better than it being tighter to get the leaf spring into it.

I’ve ordered a few items from etrailer now and I have been very satisfied with everything I’ve received. The quality has been great. This time I called and spoke with Will to get exactly what I needed . He was very helpful