Most Popular Bypasses Vehicle Wiring for 2013 Jeep Wrangler

I bought the Roadmaster Tail Light Wiring Kit with Bulbs RM-155 to install on my 2013 Jeep Wrangler Unlimited for towing behind our motorhome. I watched the install video before it arrived. With the help of my friend Steve we had it installed and working in about 2 hours. The install was easy. Routing the wiring took the largest amount of time. Cutting out the bulb holes in the tail light assembly was a bit scary but it was easy just like in video. Thanks Etrailer for great service and really helpful how to videos. Chuck B.

Perfect product for my needs. Going to be fun just installing it! Great product and GREAT SERVICE from etrailer.com. Thanks again!

A very easy way to light my jeep when towed without having to cut into the jeeps wiring system.

This lighting kit is just what I needed to pull my Jeep behind my motorhome . I hooked it up for a test ride and only 1 turn signal worked. When I took the light apart I found loose wire that was not captured in the wire nut. ( wire nuts are for home construction) If this item had been built to automotive standards it may have worked without a repair. I'm not Impressed !

The Blue Ox system is top of the line and simple to install. It arrived quickly and will be installed on Thursday. The RV is still about two weeks out, so we can't field test it just yet, but are excited about the prospect of having my jeep as a dinghy for excursions.

Plenty of wire to run from front to back on a 1993 Jeep yj Be prepared to drill holes thru the backside of the housing to run the wires thru.

This is a great way to be able to tow your vehicle without happen to have the key in the on position to have my lights work. This is on a Jeep 2001 Jeep wrangler. I also disabled the steering wheel lock. Now the keys are with me and not left in the ignition so it can be stolen.

They work great on my Class C pulling my Honda CRV.

I just received them and tested them out and they work great. They are very bright and responsive. I look forward to using them in the future when I tow my vehicle behind my RV.

This is a really neat product and works great. What more can I say.

This kit did the job very well. I could have bought each part separately and saved some money, but I went with the comfort knowing all these parts will work together to accomplish the job. I couldn't figure what LED bulb to use for both brake and turn signal. I routed the wire along the truck wiring harness for half the way to the front, then slipped it into the frame channel for the rest of the way. I used a Curt heavy, round 4 pin plug at the front grill. It was a bit of work and took many hours but came out clean!

The tail light kit was easy to install, but I had to replace one of the lights within three months. The lights don't appear to be very durable. I purchased a different LED bulb as a replacement and it appears to be working good now.

Your products have been perfect, good fits and quality products. The towing base plate for my ford Fiesta fit with little modification and the ability to use standard tools. The instructions were right on. The tail light wiring kit also was easy and works great. Shipping was fast and delivery arrived as indicated. I will continue to do business with you.

I purchased the Curt Tow Bar with Adjustable-Width Arms - Car Mount - 2" Ball - 5,000 lbs. initially I was Leary of the product because of its low price compared to other tow bars. I now can say my concerns were needless because after flat towing my Wrangler over 5,000 trouble-free miles I have nothing negative but only positives to report. The best thing I like about the tow At is that it only takes 5 minutes to attach and unhook.

These lights have worked flawlessly for the whole 2023 camping season on my RV towed vehicle. I mount them on the rear of the roof so they are nice and high above bicycles on a hitch mounted rack.

Helpful staff fast delivery

Installed in my 2024 Chevy Trax. I ran the wire harness up through the front fender, and along the DS rocker panel. No drilling into body required. However, I purchased extra loom to better protect exposed wires next to body. Additionally, I purchased extra wire to support the DS to PS taillight connections. Finally, be advised the plastic taillight assemply is "double hulled," so once you bore through the exterior of the assembly, you will need to drill again, into the lense. On this point, and to ensure a good fit of the bulb socket, a Dremel tool was used to grind down the plastic surface, to ensure a good flat and tight fit. Finally, I used the first cut-out to fashion a cap and to seal the light socket installation. See pic.

Click to Enlarge

Exactly what I needed for towing my Jeep Wrangler. A very simple and functional system that comes with a convenient carry case.

Great product, strong and reliable. Very easy to put on and take off of my tow vehicle.

Click to Enlarge

Poor quality trailer light connector/transmitter. I received two different ones both with already broken transmitters. The first one was the wrong part anyway.

Click to Enlarge

Haven't had time to really use it, but I connected it and all lights appear to be working as designed. This saved me a lot of time. Rather than having to run wiring through my truck and modify the taillights, this will do just fine! Hope it holds up and glad it's made in the USA.