# 1
24x60 Reese Cargo Carrier for 2" Hitches - Steel - 500 lbs
Great cargo carrier. We've used it for a camping trip and are about to use it again for a cross country roadtrip. Adds a lot of capacity and is easy to use. Works well behind our 2011 Toyota Sienna.
I was looking for a safe and sturdy cargo carrier for all that excess tailgating gear. This is perfect and holds a heap of gear. Putting it together was no problem, all parts machined to fit easily and align well. Highly recommend this carrier. I must add that the service from etrailer was outstanding. They kept me informed all the way through from order placement to early delivery - it arrived on my doorstep in perfect condition in just 3 days. Great company to work with and I will be back for sure.
# 2
20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
Product as advertised.
Product came in excellent condition and shipping is fast. Very satisfied and definitely will do business again.
# 3
24x60 Curt Cargo Carrier for 2" Hitches - Steel - 500 lbs
Installed on 2018 Sienna. Sturdy and well built. Purchased this cargo basket for our upcoming trip to Florida (1500 miles). I'm able to get (4) full-size suitcases lying on their sides within the frame rails. Plenty of storage, very pleased.
The cargo carrier has worked very well for us. Assembly was easy. With the hitch receiver adapter we purchased and installed, our Toyota Sienna minivan's back hatch door can open without interference from the cargo carrier, and more importantly, I have room to stand on the ground in between the carrier and the minivan. This was important to me so I could step up onto the van's rear bumper to reach our rooftop tent.
# 4
19x60 Curt Cargo Carrier for 2" Hitches - Aluminum - Folding - 500 lbs
Product as advertised.
Product came in excellent condition and shipping is fast. Very satisfied and definitely will do business again.
# 5
32x48 Reese Solo Cargo Carrier for 2" Hitches - Steel - 400 lbs
Just put it together this afternoons. I had a little difficulty putting it together. If there was a bit of a space between the mesh things would have been easier. At any rate it seems solidly built and wasn't all that difficult to put together. This should meet and exceed our expectations. Our fist use will be this weekend. It'll make packing a breeze. We plan to use it for a manual wheelchair and our cooler. Thanks for the fast shipment and good price
The carrier I purchased works great for both my DR Stump Grinder and my 28 inch snow blower. I've also hauled a Troybilt Horse tiller on the back of my Toyota Sienna van. Probably the biggest improvement I could recommend to the manufacturer is do a better quality job of rust prevention.
# 6
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
Works great, I use it to move tool to my other house with my sienna van. Easy to handle an install an handel.
Very sturdy product made with quality materials. Was very easy to install and as universal features. Multiple locking bolts allow for increased confidence in the product and the size/dimension make for great additional caring space. As a family of five, this is a great addition for family outings (camping, beach, road trips).
# 7
GearDeck 17 Enclosed Cargo Carrier for 2" Hitches - Slide Out - 17 cu ft - 420 lbs - Black
Perfect sized box for carry sized luggage and softball game day gear. Proven space saver. Receiver is showing signs of rust otherwise would be a ten. Would buy again.
The cargo carrier generally performed as intended, but it took a lot of tinkering and a warranty replacement of the lid to complete things to our satisfaction. On delivery we found that both two aluminum side stiffeners had been bent during shipment, and were replaced fairly quickly. We then found excessive play in the fit with the receiver, and it was impossible to accommodate a "noise reduction clamp" properly at the hitch, so I used part of a bent aluminum stiffener to apply pressure across the connection between the receiver and the hitch. And lastly, the lid section was warped by over 1", which still kept rain out, but did not keep fine dust out, and it was very unsightly. After a bit of discussion, a replacement lid was provided at no cost, which I have not yet had the chance to inspect as it was delivered to our Arizona home over the summer, and we spend the summer in Canada.
Surco Hitch Cargo Carrier Review - 2012 Toyota Sienna
Today on our 2011 Toyota Sienna well be test fitting the Surco 24 inch by 60 inch cargo carrier, part number 52018. To mount this carrier to our vehicle well insert the shank of the carrier into the receiver tube of our hitch. Well line up the hitch pin holes and secure the carrier with the standard five eighths inch pin and clip. Now well go over a handful of clearance measurements. Weve got about 12 inches of ground clearance at the rear of our cargo carrier and about a half an inch of clearance between the closest part of the carrier and the closest part of our bumper. Overall weve added about 26 and a half inches of length to the rear of our vehicle.
Curt Folding Hitch Cargo Carrier Review - 2012 Toyota Sienna
Today, on our 2012 Toyota Sienna, we'll be test fitting the Curt 24 inch x 60 inch folding cargo carrier, part number C18132. To mount our carrier to the vehicle, we need to insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pinhole and we'll secure the carrier with the standard 5/8 pinning clip. We won't be able to use the carrier in the folded-up position due to inadequate clearance for the bumper. Now, we'll go over some clearance measurements. We've got about 18 and a half inches of ground clearance at the rear of the carrier and about 10 inches of clearance between the closest part of the carrier and the closest part of the bumper.
Curt Folding Aluminum Cargo Carrier Review - 2012 Toyota Sienna
Today, on our 2012 Toyota Sienna, we'll be test fitting the Curt folding aluminum cargo carrier, part number C18100. Now, there's not enough bumper clearance to use this carrier in its upright position so we'll just use it as a flat carrier. To mount the carrier to the vehicle, we'll insert the shank into the receiver tube of the hitch, line up the hitch pinholes and secure the carrier using a standard 5/8-inch pinning clip. Next, we'll go over some clearance measurements. We've got about 13 inches of ground clearance at the rear of the carrier and about six inches of clearance between the closest part of the carrier and the closest part of the bumper. Overall, we've added about 26 inches of length to the rear of our vehicle.
Curt Hitch Cargo Carrier Review - 2012 Toyota Sienna
Today on our 2012 Toyota Sienna, we'll be test fitting the Curt 20-inch by 48-inch cargo carrier, part number C18145. To mount our carrier to the vehicle, we'll insert the shank of the carrier into the receiver tube of the hitch. We'll line up our hitch pin hole, thread in our anti-rattle bolt, and tighten it down using a wrench. Next, we're going to go over a handful of clearance measurements. We've got about 11-1/2 inches of ground clearance and 1 inch of clearance between the closest part of the carrier and the closest part of the bumper. Overall, we've added about 21 inches of length to the rear of our vehicle.
What our customers are saying:
"Super fast shipping, even a week before Christmas!! Recommend this company for great service!! I ordered a folding Cargo Carrier from your company on Mon., Dec.16 about 1:00 P.M. I wasn' sure I'd have my carrier in time for Christmas. Imagine my surprise when a U.P.S. truck pulled into my driveway on Wed.,39800, at noon!!! Wow, you guys are great!!! Just thought you'd like to know! Thanks again, Pat"