Most Popular Sliding Fifth Wheel for 2012 Ford F-150

Works great but heavy. Thankfully it's two piece to take out and put in.

Arrived yesterday, box with hitch was broken, UPS driver said he taped it up. All parts look good. Plastic bag with small parts was torn open, 2 small parts missing, I can get them locally. I understand that there heavy Just need to be packaged better. Otherwise all ok.

Didn’t realize it was 13k thought it as the 18 k I wanted….

Love it works great

The hitch is great. I installed it myself and it worked very well pulling a 5th Wheel Trailer across the country last year. I have learned however that one must start out from corners slower to avoid a large "clunk" as the hitch slides in the frame per the inherent design. Great Product!

The B&W hitch is extremely high quality The fit and finish and how easy it works Is well worth the few extra bucks. And it made in America. Go B&W etrailer made it so easy thank you etrailer

Great customer service from Amyl. I changed out a pull rite to a patriot 5th wheel hitch. Using my pull rite bed rails. Amy knew they would swap straight over. No problem easy easy. Cheers

The new lower base for the Demco hitch arrived on Tuesday via Freight it was a great interaction the driver I actually knew from a previous delivery, me and a friend were able to lift the old one out of the bed of my truck and install the new one today and all I have to say is... PERFECT FIT! It appears that Demco has already redesigned the lower base compared to my original one to prevent this problem from happening again. I was actually kind of shocked to see that upgrade and change. I cannot say enough good words about you with etrailer and Demco working with me to get this problem solvedm Yes it took a little bit of work, ultimately this time we got it. I cannot thank you guys enough. My friend and I will be finalizing the installation and getting it locked down to the bed with a few custom spacers for the lower rails this weekend. Here are a few pictures of the installation resuming. If I remember , when I finally pick up my new camper, I'll send some pictures along too. Have to give credit where credit is due . Not sure of you have a customer wall at HQ. I know we had one in my old shop. Anyway.. thank you again .

Has to do a little assembly, really easy. Tows super nice, when turning does move towards the back. You’ll need to adjust the guides for the fifth wheel.

I have not towed with it yet but the build quality is excellent. The finish is perfect. The slider function is very smooth. It was very easy to get in the truck, but not sure that is unique to any modern puck system. The cotter pin on the castle bolts on the puck locking handles were a bit finicky. It is heavy, but not as heavy as I thought. I think I have a few more years in me for moving it myself!

my companion 5th wheel hitch(rvk3370) hitch was delivered on 3/11, I installed it in a couple hours on 3/12. It was a piece of cake, the delivery was made with a lift gate truck that I back my truck up to and had the driver lower the lift gate down onto my tailgate, I unpackaged the hitch and was able to Maneuver it by myself into the puck system on my truck, I have the slider hitch so much heavier than the standard one, but still very easy for my 65 year old body to handle, the B t W was the only hitch I considered because of the ruggedness and quality of their products my truck is a 2023 Ford F 350

This hitch works extremely well. The slide is nice if you get into any tight cornering situations. The hitch top and base separate making it a bit easier to mount and unmount.The lock washer used with the mounting bolt that draws up against the gooseneck pin broke on the 2nd use. I had 2 different torque wrenches set to 79 lbs that I tested the bolt with. Unsure why it broke. But overall we love this hitch and we pull a 38f 5ver without issue. Very smooth ride.

There is a slapping noise or a bumping coming from the fifth wheel can't seem to find it and I don't know if something is wearing out been finding metal shaving in the bed not big one's but enough to concern me though maybe you might have some insight about this? This starting happening about 6 months of Use.

The first shipment had wrong parts shipped with four slide mounts that were damaged (loose foot, gouges, damaged label, etc.) and no header or cross bar. The second replacement shipment had missing bolt, pin, and rubber parts from an obvious previous return where the customer had cut open the parts bag and the parts were all loose in the box with some going out the holes during shipment. The header and cross beam were also gouged and scraped up. The boxes that were in really poor condition heavily taped, holes, and falling apart - obvious returns instead of a new hitch we were buying.

GREAT GREAT GREAT EXPERIENCE AND EVERYTHING THAT GOES WITH THIS WEB SITE.....PRODUCT TO PRICING TO SERVICE.....

I think that etrailer requires their employees to lie so as not to have any confrontations with customers on the phone. I placed two orders on 8/23 and immediately received followup emails that order received, order processed by (employee name) and then is in stock with associated time each step completed. Then I noticed that shipping date kept getting 1 day later each day I checked order status. So, I contacted etrailer on day 5, 8/27 and find out my item was not in stock at all and would not be until mid Oct. Well,I then had them order me the same part by a different manufacturer and was told that it was in stock and would still be still be shipped 8/28 and delivered on 8/30, the same day my fifth wheel hitch is being delivered, so everything seemed rectified until I checked order status online the evening of 8/28 and find that the ship date again had been pushed back another day 8/29 with a delivery date of 9/1, (which is a Sunday). Seems that at this rate I may have it sometime in September. Going by their assurance of delivery on 8/30, I arranged to pickup my new camper on 9/5, that seems to be an impossibility at this time because Order #121389499 the installation kit with base rails is a very necessary part of the assembly. So, in closing I can only say that if you do not have the parts to ship, be honest and state the truth. This has made me feel very negative now toward etrailor as I already had become with Camping World. Is there any honesty in the RV parts aftermarket?

This review is for the Demco Autoslide 21k and accompanying OEM rail adaptor I purchased for a 2020 Ram 3500 Megacab DRW. I've owned it one year. Overall, the hitch performs as I expected. It is high quality, very sturdy and seems like it will last for a long time. I had it installed at the dealer when I purchased the truck. It automatically slides to protect the cab in my 6'4" bed without any incidents. I tow a standard fifth wheel RV. There are a few negatives, which are not necessarily shortcoming of the product but, instead, necessary evils to allow me to have a short bed. First, it is BIG and BULKY. I believe this is just a function of the mechanism required to allow the autosliding feature and I am not really sure there are any other lighter alternatives with this feature. The fact it requires two parts (OEM Puck Rail and hitch), make it even more bulky. It takes up almost the entire bed and prevents most auxillary tank / tool box combos from fitting. Even standard size storage bins will not fit in my bed. I would prefer if they had a custom OEM all-in-one hitch for my truck like they do for the Ford. It adds significant weight, which decreases carrying capacity, which can be at a premium in hauling a heavy fifth wheel. I've never even tried to take it out of the bed due to the weight and difficulty. I also am not very happy with the adjustable catch plate design. It requires significant manipulation loosening and tightening 8 nuts when hitching and unhitching. This requires a step ladder to reach the nuts. I also found out after the fact that it does not come with the right size catch plate attachments for my hitch and I had to purchase a separate part, which added unexpected expense and delayed my taking the RV on its first trip. Overall, I am satisfied with the hitch.

It preforms as described. For me it was difficult to get the base correctly set up so the hitch would easily remove out of the trunk bed then reinstall. I actually had to assemble the hitch in the trunk to get all of the parts to correctly align. My concern is what would happen if the hitch is rotated beyond the gears. The trailer can rotate beyond the limitation of the gears. The picture shows the hitch at full rotation but as you can see the trunk could still rotate farther without contact to the cab.

Item works exactly as described. I have a shortbed (6.5') Ford F350. Probably towed our 5th wheeler 5000+ miles with no problem. Then last year it happened! We were making a sharp turn in an uneven lot and POW, the 5vr hit the rear window and it exploded. After that I became gun shy about turning with the 5vr attached so I started looking at sliding hitches. A slider that you had to get out and unlatch to make work, didn't make sense to me. At what point do you get out? So, an auto slider hitch was purchased. Now when I get to a certain degree turn the auto-slide hitch moves back in its carriage and then auto-slides to the normal location once straightened out. Not gun shy anymore. Pro: Well packaged Well made Easy install It WORKS. Cons: Price Very heavy Some clunking after it straightens out from a turn

There is a very pronounced clunking and jolting at times when turning from a stopped or slowed position. Perhaps it’s more the angle (90 degrees) than the speed.

Love this hitch. While it is heavy it provides the stability and auto slide capability that I need to comfortably drive my 5th wheel thousands of miles. I have never had my 5th wheel contact my cab no matter how tight I turn.

This was the best solution for my Dodge RAM 2500 towing my Alliance 340RL 38' 5th Wheel. My son helped me install the rails under the bed and now it is very easy to remove the hitch when I am not using it. It is very strong and I highly recommend this for anyone with a short bed truck.

Great hitch, easy to hook up and always remember that you get what you pay for!

This is the second B&W slider I have owned. The quality is second to none. Took about 30 minutes to install. Years ago I bought one used, it was missing the little spring that keeps the head level, I called B&W to inquire how much it cost and where I could get one. They sent me the replacement for free, even though I told them I had bought it used. That tells you all you need to know about this company. Customer for life.

High quality, love the slider feature! We started full time RVING this year! But I bought the hitch during a sale! My only concern is that the truck manufacturers, the RV frame manufactures and the hitch manufacturers don’t coordinate. My 2024 RAM bed height plus the hitch at the lowest possible setting does not allow my 5th wheel to be level. I am slightly nose high. It is possible to get a different brand hitch or the non slider version of the BW that is slightly lower- but I’m not willing to give up the slide feature due to having a short bed truck. Overall, I’m pleased with it.

Easy to install, great quality

Doesn't operate as easily as I hoped. Sticks when trying to slide which means jumping in and out of cab many times. Also its heavy as it should be,but it doesn't come apart easily for removal in two pieces that can be lifted separately. You need a winch to remove it safely. Its a pain in the you know what. I like my old two piece hitch better. I could take it in and out in a few minutes, but it won't work in my new f350.

I received my #20000 curt hitch with slider rail a couple of days ago. The problem is I received two slider rails and no top hitch. I called etrailer to inquire about the shipment. The folks on the line were very helpful. They reordered the hitch head and made arrangements to have the extra slider rail picked up at my house which will happen in a couple of days if all goes well. Mistakes happen and I will see how it is corrected. I will wright another review when the hitch head arrives.

A great price shipped fast via freight. No issues with broken boxes as many others have mentioned. First fifth wheel for me, assembly and install into the factory Ford pucks was amazingly easy. Do not know for certain if the slider will be necessary for our new Arctic Wolf camper. We may swap out for stationary legs if we can get away with it. I love etrailer!

Curt A16 with Slider base for Ford OEM Pucks I went through a good bit of anxiety after trading my 2013 F-250 for a 2018 F-250 due to the height of the 2018. I did not pay close enough attention to bedrail and rear height and I was beside myself sick over it so this review might be a bit long while I explain my journey. I replaced a 2013 F-250 4WD with a Reese Pro Series 16K square tube slider universal mount with a 2018 F-250 with OEM pucks. I pull a 2015 Prime Time Crusader 315RST. I measured, I had boards with levels, mock up on hitch height, I read every forum and article I could find and still I was worried I had made a big mistake. Finally, I called eTrailer and talked to Molly and she had, (or went and got) plenty of answers as I had narrowed it down to the B&W BWRVK3370 20K Companion Slider and the Curt A12. I decided to not go for the “the most expensive is better” and went with the Curt A12 saving me about $300. The 20K B&W was the smallest they had and with an F-250 I would never really come close to that weight before I passed the GCVW limit so it made no sense. The Slider base for the Curt says it is the same base used up to 24K so if I ever do I can just buy the new head I believe. Ordered on a Saturday it arrived on Thursday at noon. No issues with shipping at all, the hitch came in 2 boxes strapped to a pallet. No damage like others experienced. Assembly took me about an hour because it is heavy and awkward to line up the slider linkage but all in all nothing too difficult. I set the hitch head mount at the 2nd from the bottom (18 inch) hitch height because I had measured the truck and camper and was worried about having 6 inches of clearance camper to bed rail. Turns out on a 2018 F-250 4WD at the 18-inch level on the hitch I have 8 inches all around and 7 inches at the highest point on the tailgate. After I installed the hitch and put the camper on the truck and applied weight I got about 3-4 inches of squat, which made the already rear high truck sink to near level. I do have more nose high attitude on the trailer than I had before but it was not terrible. I moved the height adjustment down to the 17 inch (lowest) today to lessen the nose high attitude by another inch and I have 6+ inches clearance still. The hitch. Like I said before I had a Reese Pro Series 16K slider and it was noisy as hell. Kingpin clunk starting and stopping, creak at every bump and turn. I put the Curt A16 in and took the trailer for a drive with the rear slider window open and heard nothing. Absolutely nothing. No start/stop clunk, no creaking, nothing. Hook up was very easy and the interlaced kingpin jaws make visual check very easy. Operating the slide takes a bit more effort but it worked fine and locked securely. It did not latch back to maneuver and then back again to towing automatically like the video without jostling the handle a little but I am sure it will once broken in and I grease it a bit more. The puck system was easy to adjust and make a solid connection to the truck with no play. I could not be more pleased with the hitch. Cons- The hardware was packaged like one would expect and it was all there but the bolt for the center connection of the slider linkage was different than the handle and passenger side joints. It is too small and caused a lot of play. I used it anyway but it allows play in the handle and not firm for unlatching. I will replaced it today and now it works great. eTrailer is now my go to store for trailering supplies.

2017 F250 curt A16 slider Ford prep package