Most Popular Above Bed Rails for 2010 Ford F-150

So far, this hitch has been fine to use. I had it installed by a professional installer company. The next day we went to pick up our new/used 5th Wheel. I set the hitch to receiver and backed into the king pin and checked the connection. Set the handle and connected the emergency brake carabiner. When we arrived home, I tried to disconnect and could not pull the release handle out. No matter what I tried it would not release. I finally pulled to pins that connect the head to the hitch and lifted the head with the trailer. I finally called the installer, and they did not have an answer. I then called Curt, and they told me that most likely the problem was that the release handle was probably installed 180 degrees out. I removed the handle and reversed its position, and the head released. It was an inconvenience, but no harm done. I drive a 2017 Ford F-350 Short box, so I purchased a slider hitch. I have not had to slide the hitch because the trailer has always cleared the cab of the truck.

Etrailer sent me a one year follow-up email. Since purchasing this I've used it to tow our 11k lb camper about 5k miles. The hitch and slider have worked exactly as they should and I have no complaints.

I very much appreciate the expedited shipping and the follow-up. Appears all made it in good shape. Have put you guys on my favs along with Harbor freight, Home Depot, Cabella's, and Big 5.-----Tell more when installed. Will only use on occasion at Tree Farm.

This is a very good replacement of my Reece 1500 and this company did a great job getting this new hitch plate out to me in just a few days thankyou George and staff

Love the hitch, slider's OK, my truck hates them though. It'd probably be fine in a different vehicle but The "acceptable play" in the slider mechanism is at a resonance to my truck and camper creating a vicious front-back oscillation hitting rough surfaces. After addressing several other issues and the problem persists. Finally, I 3D Printed bushings to eliminate the play which almost completely eliminates the oscillation. On the bright side, Curt and etrailer are working with me on it.

1st off, customer service was Awesome, the ladies Ashley & Kim knew what they were talking about when helping me order my hitch. Installation was fairly easy, would help if you had a 2nd person but I got it done. The 1 thing that might be an issue is the height of the hitch when added with the height of the mount. I am hoping the new trailers kingpin will adjust low enough so the trailer rides level. For the hitch itself, I like it so far, can't wait to see how the full wrap around jaws works. I would recommend etrailer to anyone that needs a hitch. Gave ot 4 stars only for the fact I have not pulled with it yet.

Works great but heavy. Thankfully it's two piece to take out and put in.

Arrived yesterday, box with hitch was broken, UPS driver said he taped it up. All parts look good. Plastic bag with small parts was torn open, 2 small parts missing, I can get them locally. I understand that there heavy Just need to be packaged better. Otherwise all ok.

My current bw companion says on it that you can not use it with the sidewinder. Used the chat to get info on using my existing sidewinder on my new truck. The person from etrailer built me a cart with everything I needed. Except it's not compatible. I have a Ford with the factory prep. They told me there was no way to use it. I got the rail system they recommended only to find out that it doesn't work. Also this wedge they recommended doesn't not fit the sidewinder. Just buy local and save the headache. Now I have to schedule a Ups drop off and leave work early to bring 300lbs of boxes to ship back.

So far everything has worked out great. The hitch was received quickly and the assembly was very easy, with directions very clear. The hitch installed into the existing rails as the person who helped me said thy would. I have not yet hooked up to my 5th wheel because it is in storage for the winter but as easy as it works I have no doubt it will work great.

Didn’t realize it was 13k thought it as the 18 k I wanted….

Love it works great

This can be easily put together and installed by one person. I had to put the base into the universal rails loosely and then torque the bolts to spec. This hitch was an upgrade.from the autoslide hitch I originally purchased for my 5th wheel. The noise and banging has disappeared. This hitch was well worth the money. I also purchased the custom fit wedge for my pinbox. I don't believe I could be any happier with this hitch.

This hitch is has certainly served its purpose. Easy to use and reliable. My only complaint is that I can't seem to separate the hitch plate from the base. I thought it would be easier to separate the two components.

Nice kit. Came with everything I needed to install.

We have the turning point pin on our rig so we had to get a wedge. I don't know if it was the wedge or the hitch but unless we were perfectly straight and level, we couldn't hitch up. Same with unhitching. After the 3rd time of not being able to unhitch without taking the entire head of the hitch off, we locked up the turning point and got a new hitch and do not use a wedge. Also, with only a bar going across, the pin seemed to wiggle around a lot.

They advertise you can be within 3” of hitch and still connect I found that you need to be almost perfect. And to latch and unlatch there can’t be any pressure going up or weight going down, you have about a 1/4” to play with. I found it to be rougher when pulling than a normal fifth wheel hitch. It is very light though.

We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.

The B&W hitch is extremely high quality The fit and finish and how easy it works Is well worth the few extra bucks. And it made in America. Go B&W etrailer made it so easy thank you etrailer

Great customer service from Amyl. I changed out a pull rite to a patriot 5th wheel hitch. Using my pull rite bed rails. Amy knew they would swap straight over. No problem easy easy. Cheers

The new lower base for the Demco hitch arrived on Tuesday via Freight it was a great interaction the driver I actually knew from a previous delivery, me and a friend were able to lift the old one out of the bed of my truck and install the new one today and all I have to say is... PERFECT FIT! It appears that Demco has already redesigned the lower base compared to my original one to prevent this problem from happening again. I was actually kind of shocked to see that upgrade and change. I cannot say enough good words about you with etrailer and Demco working with me to get this problem solvedm Yes it took a little bit of work, ultimately this time we got it. I cannot thank you guys enough. My friend and I will be finalizing the installation and getting it locked down to the bed with a few custom spacers for the lower rails this weekend. Here are a few pictures of the installation resuming. If I remember , when I finally pick up my new camper, I'll send some pictures along too. Have to give credit where credit is due . Not sure of you have a customer wall at HQ. I know we had one in my old shop. Anyway.. thank you again .

Has to do a little assembly, really easy. Tows super nice, when turning does move towards the back. You’ll need to adjust the guides for the fifth wheel.

Parts arrived for the DM 8550043, received only the hitch base plate and adjustable shaft for the hitch head. Have been told that the hitch head is shipped separately. Now have a problem with the hitch plate fitting the bed rails. The holes for the pin that secures the hitch plate to the rails are to close to the bottom of the hitch plate photos are given of the problem a pencil was used for reference. There is NO WAY the pin will go through the rail and hitch plate. Waiting on a solution from etrailer. The hole that you can barely see the pencil is tailgate rails pin fits fine.

The truck that got the install is a 2002 Ford F350 Super Duty 7.3 L Diesel dually. The Demco Recon 5th wheel hitch (DM8550043) looks like a well made, heavy duty hitch. All the welds are precise and well done. I like the single wrap around jaw with the real thick bar that backs that up. The handle that pulls out to unlock the jaw moves with ease and locks in the out position when the jaw opens. When the king pin comes in contact with the back of jaw, the jaw wraps around the king pin, the handle closes, you put in the safety pin and your ready to go RVing. I chose the Husky Custom Rails and installation kit (HT31405-686) for my install. The reason I chose these rails over the ones that etrailer had matched up for the hitch is, I had previously installed a set of Airlift Airbags and I didn't want the rail install to interfere with the airbags. It was a good choice, there was no interference at all. If I had not had the bags, I would have chose the rails and install kit that require no drilling. Drilling the holes went very fast and easy, it was torking the rear bolts down that was very difficult. There was not enough room to get a wrench of any kind around the nut. I wound up using a set of vise grips on the nut while a friend of mine torked the bolt slowly from above. All and all I'm happy with the product and I'll give another review in a year.

Great servive!!! Thank you so much!!!

Just received yesterday, will be having it installed on Monday and will be pulling my new camper home next Saturday. Will update afterwards with pics

GREAT GREAT GREAT EXPERIENCE AND EVERYTHING THAT GOES WITH THIS WEB SITE.....PRODUCT TO PRICING TO SERVICE.....

The first shipment had wrong parts shipped with four slide mounts that were damaged (loose foot, gouges, damaged label, etc.) and no header or cross bar. The second replacement shipment had missing bolt, pin, and rubber parts from an obvious previous return where the customer had cut open the parts bag and the parts were all loose in the box with some going out the holes during shipment. The header and cross beam were also gouged and scraped up. The boxes that were in really poor condition heavily taped, holes, and falling apart - obvious returns instead of a new hitch we were buying.

This hitch is average at best. It has been garage kept and already sticking and not opening properly. I have owned a 5th wheel camper my entire life and the 2 prior hitches was never serviced and gave no issues. I would not recommend this hitch to no one....

This 5th wheel has exceeded all my expectations. It’s worked flawlessly for thousands of miles and many different type of 5th wheels trailers. Not a peep, B&W FTW!!

I think that etrailer requires their employees to lie so as not to have any confrontations with customers on the phone. I placed two orders on 8/23 and immediately received followup emails that order received, order processed by (employee name) and then is in stock with associated time each step completed. Then I noticed that shipping date kept getting 1 day later each day I checked order status. So, I contacted etrailer on day 5, 8/27 and find out my item was not in stock at all and would not be until mid Oct. Well,I then had them order me the same part by a different manufacturer and was told that it was in stock and would still be still be shipped 8/28 and delivered on 8/30, the same day my fifth wheel hitch is being delivered, so everything seemed rectified until I checked order status online the evening of 8/28 and find that the ship date again had been pushed back another day 8/29 with a delivery date of 9/1, (which is a Sunday). Seems that at this rate I may have it sometime in September. Going by their assurance of delivery on 8/30, I arranged to pickup my new camper on 9/5, that seems to be an impossibility at this time because Order #121389499 the installation kit with base rails is a very necessary part of the assembly. So, in closing I can only say that if you do not have the parts to ship, be honest and state the truth. This has made me feel very negative now toward etrailor as I already had become with Camping World. Is there any honesty in the RV parts aftermarket?

This review is for the Demco Autoslide 21k and accompanying OEM rail adaptor I purchased for a 2020 Ram 3500 Megacab DRW. I've owned it one year. Overall, the hitch performs as I expected. It is high quality, very sturdy and seems like it will last for a long time. I had it installed at the dealer when I purchased the truck. It automatically slides to protect the cab in my 6'4" bed without any incidents. I tow a standard fifth wheel RV. There are a few negatives, which are not necessarily shortcoming of the product but, instead, necessary evils to allow me to have a short bed. First, it is BIG and BULKY. I believe this is just a function of the mechanism required to allow the autosliding feature and I am not really sure there are any other lighter alternatives with this feature. The fact it requires two parts (OEM Puck Rail and hitch), make it even more bulky. It takes up almost the entire bed and prevents most auxillary tank / tool box combos from fitting. Even standard size storage bins will not fit in my bed. I would prefer if they had a custom OEM all-in-one hitch for my truck like they do for the Ford. It adds significant weight, which decreases carrying capacity, which can be at a premium in hauling a heavy fifth wheel. I've never even tried to take it out of the bed due to the weight and difficulty. I also am not very happy with the adjustable catch plate design. It requires significant manipulation loosening and tightening 8 nuts when hitching and unhitching. This requires a step ladder to reach the nuts. I also found out after the fact that it does not come with the right size catch plate attachments for my hitch and I had to purchase a separate part, which added unexpected expense and delayed my taking the RV on its first trip. Overall, I am satisfied with the hitch.

Truly happy with this product and can't wait to go to work! etrailer sent me everything I requested and the installer had no problems. Everything was packed well in shipping with no problems.

I’m very happy with the ease of ordering and the information videos that Curt had available before I made my purchase. When I received myQ24 hitch it was great quality and very easy to assemble it also works better than expected. Thank you etrailer

Very good quality and well made fifth wheel hitch...No problems

Only thing it was missing was the bolts nuts washer lock washers and the pins for the fifth wheel where I couldn’t put the legs on it everything else was good good fifth wheel.

Of all the products I have purchased from E-Trailer, the CURT 5th wheel hitch has been the most disappointing. After installing the unit, I noticed workmanship items that are not consistent with a high quality unit. The legs and main body did not consistently align and there is excessive chucking (in my opinion) that occurs while traveling. When I addressed this with CURT, I received no response regarding the misalignment and was told the chucking was within industry standards! Two previous 5th wheel hitches did not "chuck" as this unit does. When I addressed these concerns with E-Trailer and requested a refund, I was informed since the unit had been installed no refund was allowable. I asked how I would hear/feel the chucking w/o installing and got no viable response then as well. I will eventually go with a GenY gooseneck adapter. Do not support CURT, they do not stand behind their products and customer service is pretty much nonexistent!!

Excellent on all levels. Fast shipping via right company.

Install was easy and the hitch performs perfectly. I have ZERO complaints. Even a year later, it performs great.

Shipping was extremely fast and all the extra information that can with the products I purchased made the entire experience that I would return for and refer friends to.