Summer Starts Here - Save up to 70%
# 1
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
2012 Dodge Ram PickupThe Roadmaster Tow Bar Wiring I purchased works great and was reasonably easy to install on my 2012 Dodge Ram 3500. It is a great product at a decent price and I would highly recommend it. Thanks guys.
I installed the kit today. It came as advertised. Good product and would buy it again.
# 2
Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
Very complete kit. My only problem mounting it in a 2014 Chevy Spark is the limited space for the diodes. After much trial and fitting I found a suitable location. See photo.
This item was recommended by Jameson once he saw what I was planning to order for the tow bars and brake system. It was installed by a shop on the etrailer authorized installers list, along with everything else for the entire towing system. It does attach to both vehicles just fine, although at first I wasn't sure it was fully attached on the motorhome side. I was afraid it would just slide back out, but it hasn't.
# 3
Tail Light Isolating Diode System with Wiring Harness
Got the kit installed. Using on my toad (RAM Dakota) to be pulled behind my motorhome. My first one like this and easy and good quality product. Highly recommend.
# 4
Roadmaster Brite-Lite Wiring Converter
I will tell you what I like about this wiring converter. IT just plain WORKS exactly as it is supposed to. I used quality crimp connectors that seal with heat and the installation was easy and after more than a year and all kinds of weather there have been no issues. I am not surprised as I have bought from etrailer before and have never had a problem with an order or quality.
East to wire up.. made it a lot less headache to do without it
# 5
Curt 2 to 3 Wire Tail Light Converter
i used this on my trailer so that i was able to use taillights with separate (amber) turn signals, it works like it is supposed to, BUT it doesn't work with LED tails bc it drops the brake wire voltage coming out of the convertor to 10v causing the brake light LEDs to not function properly; i solved this issue with a voltage regulator (10-32v in - 13.8v out) so if you've got a little wiring knowledge or are using incandescent taillights then it will work great for you.
1 Tail Light Converter - C56196 : i was a little confused, but finely figured it out. 2 Tail Light Isolating Diodes (Qty 4) - 48955 : i was told i would need these (their for towing a vehicle, not a trailer) etrailer salesperson should had known that(they were told) wasted money, cost to ship back
# 6
Blue Ox Tail Light Wiring Kit with Block Diode
Haven't installed yet but service was excellent
Must easier to install
# 7
Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit
This place is the best! Placed my order- easy peasy-delivered on time- Watched install video- again made it so easy and saved $1000 installation fee!!! Thanks for being a great company and special thanks to Carol C my order specialist !!!
I installed this myself along with a tow bar from another company at the same time, in about 4 hours. installation was straightforward and worked perfectly. saved about $800 in total labor.
# 8
Blue Ox 4-Diode Universal Tail Light Wiring Kit for Towed Vehicles
Took a bit to get to the rear lights on the wrx - trim pieces etc. But once there the instructions were easy to follow and the lights work great!
I returned this item in favor of the Curt Bronco flat tow light kit. The Curt kit is far superior to the Blue Ox kit. The Curt kit is totally plug and play no diodes to deal with. I would have bought the Curt kit from you if you sold it. You would be better served with the Curt kit.
# 9
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service! During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors. A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
# 10
Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
etrailer was extremely helpful in getting me parts to flat tow our 2023 Jeep Wagoneer. More specifically, Noah took the time to research the required parts, offer technical guidance, and follow up to ensure I was taken care of. Top notch service which was much appreciated.
Needed new wiring and diodes for my 2023 Jeep Rubicon. ETrailer makes it so easy to set up all the wiring for flat towing.
# 11
Curt Universal Tail Light Wiring Kit for Towed Vehicles
The labels for the Right Taillight Running Light splice were labeled Backwards, to module and to vehicle were reversed which wasted 30 minutes of time. Beware! etrailer may want to get this right with the vendor or risk a bunch of needless returns.
Pretty well just a box pf hardware. I bought some more diodes and figured out eventually
# 12
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Wire Hybrid Cord
My E-trailer experience was outstanding! From the great selection guide to the delivery to the installation support. The installation videos were very helpful. I had two installation issues that were answered with a prompt phone call. One call was on a Saturday morning. I highly recommend E-trailer!
Highly recommend E-Trailer for all of your towing accessories. Great product, great customer service!!
# 13
Roadmaster 6-Diode Universal Wiring Kit for Towed Vehicles with Separate Lighting
In ordering the parts I got a little confused as to exactly which kit I needed. My motorhome has combined brake/turn signal lights & the car ('03 Subaru Outback) has separate brake/turn/parking lights. Thought I needed the 6 diode kit (which I ordered) until I had all the parts here & read through the instructions for the umpteenth time (BEFORE cutting anything) & then realized what they were doing. Turns out all I needed was the 4 diode kit. Sounds like there won't be any problems returning the unneeded parts since they were never installed. Great service there! Took a lot apart in the back of the car because of the lack of space behind the tail light assemblies, but it all comes apart pretty easily. Also allowed me to route the wiring along side the stock harness. Have a bunch of 1/2" split loom here & used it. Thought I would have lots of wire left over, but I actually had to splice 2 cut offs to make a jumper long enough to get from 1 side of the car to the other. Glad the car wasn't any longer & I didn't have to make up 2 jumpers as with some of the kits! Hardest part was finding a hole in the firewall & getting the harness routed under the dash so as to not tangle with the pedals, etc. I just don't flex like I used to. Everything works fine although it was NOT a "5 minute job".
The diodes and wiring are good and worked well. But the 118158 converter produced a 3.5 volt drop such that the brake lights were as dim as the tail lights. And when a turn signal was triggered the brake lights dimmed even further. I ended up stringing a separate brake wire through the car and re-wiring my truck with a 5-wire connector.
# 14
Roadmaster Universal Hy-Power Diode Wiring Kit
have successfully completed the installation of the following items that I purchased from etrailer: > Nighthawk RM-676 tow bar > RM-524458-5 base plate > DEMCO Stay in play DM86VR > RM-152 diode wiring kit > RM-156-25 charge wire kit > RM-88400 brake switch relay kit I work slow but methodically. I had no issues other than the high degree of difficulty for a 68 y/o man working alone. This project exceeds the abilities of someone NOT mechanically inclined. There is also the need for some specialty tools. I found that feeding the wiring through the dash, firewall, and underbody was more difficult than installing the front baseplate. Overall, I am satisfied with the function of this installation. I am glad I did it myself rather than having it done. Tow vehicle: 2021 Entegra Emblem 36U Towed vehicle: 2018 Ford Fusion Platinum Energi
It fits the bill--when they say universal that's correct; may not be a "factory" wiring harness but our Super Beetle is 45 yrs old.
What our customers are saying:
"The people answering the phones were professional & knowledgeable. All this and the best prices on the internet, How can you go wrong?"