Summer Starts Here - Save up to 70%
# 1
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Excellent product, great service, I highly recommended etrailer .
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
# 2
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 3
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 4
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Installation was fairly easy on my 2001 Ram 2500. My brother and I got it installed in about 2.5 hours. Simple and solid design. Hooked up 38' car hauler and off we went. Only problem we had was the measurement Curt provides for the 4" hole location in bed floor was about 3/16" too far toward the cab, hitch lines up with hole but on my truck it is not centered (bed floor brace prevented us from being able to move hitch further forward). Not a big deal!
The best price on the market, and the fastest shipping I have ever seen. It was easy to install and worked great!
# 5
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 6
Curt EZr Double Lock Underbed Gooseneck Trailer Hitch with Installation Kit - 30,000 lbs
Seems to be very well built. Shipping was very fast. Will definitely purchase other products.
2013 Dodge Ram PickupThe hitch works fine and was easy to install. Everything fit well with one exception. The rod that locks the ball in place from the wheel well is too short. I expect it is the wrong rod for the 2013 Ram pickup. I made an attempt to contact etrailer to get another, but failed to contact anyone. Can you put me in contact with someone who can assist me in getting a replacement?
# 7
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 8
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 9
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 10
Curt Underbed Gooseneck Trailer Hitch for Ram 2500 - 30,000 lbs
Very nice hitch, took me about 3 hrs to install on a 2014 RAM 2500 6.5 bed with help from the wife. The hitch is very thick steel, probably close to 1/2". The ball works great, very easy to secure and remove. Very happy with the hitch and glad I chose it over the turnover ball which seems to be slightly harder to install. Some tips... remove spare tire, remove heat shield, drill the 3 1/4" hole, make sure to use a good hole saw made for metal, positition the nuts using the brackets, have someone get the bolts started while you hold the hitch. Tighten the bolts, you will probably have to remove the exhaust hangers to move the exhaust enough to tighten the passenger side bolts, torque to spec, drill the safety hook holes, install safety hooks and put everything back together...thats pretty much it. I took my truck and had the bed Linex'd after I installed the hitch. They touched up around the holes. Looks awesome!
Ordered the Curt underbed gooseneck trailer hitch for my Ram 2500 from etrailer.com. The pricing was great and hitch was delivered quickly. Installation is easy with assistance from one other person. This is a quality hitch and will serve my needs.
# 11
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Installation was fairly easy on my 2001 Ram 2500. My brother and I got it installed in about 2.5 hours. Simple and solid design. Hooked up 38' car hauler and off we went. Only problem we had was the measurement Curt provides for the 4" hole location in bed floor was about 3/16" too far toward the cab, hitch lines up with hole but on my truck it is not centered (bed floor brace prevented us from being able to move hitch further forward). Not a big deal!
The best price on the market, and the fastest shipping I have ever seen. It was easy to install and worked great!
# 12
B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 13
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 14
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 15
Hide-A-Goose Underbed Gooseneck Trailer Hitch - 30,000 lbs
Easy installation. Works great with our 36ft triple 7k toy hauler.
This hitch is a good example of great engineering. The parts were complete and very good quality. A few "pointers" to help with a "first timer" with the process would have been to have some stickers attached to the pieces that provide some orientation, e.g., "Towards Cab", "up/down". It would have saved a trip to the store if I had easier to find hole diameter information... maybe on the ordering page... "3-1/2" hole saw required". The video was helpful and appreciated.
# 16
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
Installed hitch looks it came that way from the factory. Difficulty level 4 out of 5 for a DIY'er working alone. The front-to-back measurement in the bed is critical for drilling the 4" hole. The measured distance given in the instructions leaves little room for error in the forward direction. Better to measure a little short, than a little long! As advertised, there was no drilling required in the frame rails, but I did have to remove the frame alignment tabs on both sides of the bed; Sawzall or cutoff wheel required. In the end; it was a full day's project, but well worth the effort!
This B&W gooseneck installed easily on my 2001 Dodge Ram 2500 in a little under 4 hours by myself. The only drilling required is for the holes in the bed for the receiver and the safety chain hooks. I'd definitely recommend a tip I saw online-- use a 3/4" piece of plywood as a template/stabilizer when you cut the 4" hole in the bed because the hole-saw will want to bite and grab badly on the bed without it. Quality product made in the USA by B&W, this is my 3rd B&W hitch and they will last forever. I will use this and another in my wife's truck so we can have one fifth wheel hitch (Companion) that will fit both trucks. Great service as always from etrailer. HIGHLY recommended. Thanks!
# 17
Curt Double Lock, Flip and Store Underbed Gooseneck Hitch w/ Installation Kit - 30,000 lbs
Installation was fairly easy on my 2001 Ram 2500. My brother and I got it installed in about 2.5 hours. Simple and solid design. Hooked up 38' car hauler and off we went. Only problem we had was the measurement Curt provides for the 4" hole location in bed floor was about 3/16" too far toward the cab, hitch lines up with hole but on my truck it is not centered (bed floor brace prevented us from being able to move hitch further forward). Not a big deal!
The best price on the market, and the fastest shipping I have ever seen. It was easy to install and worked great!
What our customers are saying:
"Thanks! Job well done Signed Delighted customer!"