Most Popular Universal Fit for 1996 Chevrolet Blazer

I received the mirrors quickly. I've used attachable mirrors before and they were really a pain in the A_ _ install and were never secure as i wanted them to be. How ever these mirrors installed quickly using the directions. After mounting these mirrors they remained very secure connected to my regular mirrors. Aside from their quality they also looked very cool and not sloppy looking. The ratchet device was just a great innovation to tighten mirrors to existing mirrors. I highly recommend this product. One other thing i really appreciated as a customer was the method set up to find the correct item that fit my particular yeast and model of my Trail Blazer.

The product fit great... the both times I used them on my 2008 Trail Blazer. The instructions were simple and they were steady on the existing mirrors. Too bad I had to trade in the vehicle. It was a nice car.,., but I still have the mirrors

Best prices, products that I need, by name! Fast shipping, inexpensive shipping. Highly recommend!

The company was fast and gave lots of updates for shipping. Once i received product my concerns were met. The straps are BARELY long enough to connect around my mirror. Once it is straped properly the tension on straps pulls them right out of the retaining clip. I ordered these because i have a 11 silverado just like what was in the product pictures. Save your money and get something else because theres no way these will make it down the highway they will barely stay on just sitting here. Kinda disappointed because i bout these for our first camping trip this weekend but these will not work. Seems like a good company just crappy product.

Unable to tighten mirror clamps enough to eliminate mirror from shaking, preventing clear image while driving.

The mirrors were just what I needed and work well on my Toyota highlander.

I went right away to try them on my truck. I have a 24 Denali ultimate 1500 Denali and I have a couple of cameras on my side mirrors. The straps are easy to maneuver around the cameras to avoid issues there. Good snug fit I have not taken it out yet to test these in real road conditions but so far so good.

Worked well and as expected. Still can't see as far behind the camper as I would like on the passenger side. Strap them on tight. They shook very litte but some, not enough to be bothersome. Later,I did find them less expensive elsewhere, oh well. Straping them on is tricky to not cover the cameras underneath the truck mirrors. Truthfully I use the camera on the back of the camper along with these mirrors and get additional views from the Chevy cameras as well. I'm not a truck driver and only pull the camper on occasion so I need all the "eyes" I can get especially driving through Nashville and Atlanta.

Mounting the mirrors was a bit more challenging than expected. I had to bend the brackets quite a bit to match the curvature of the truck’s doors. As I recall, I had to go up two drill bit sizes above what the directions called for to get the plastic inserts in the doors. The reflective quality of the mirrors is poor. Images are distorted. I’m disappointed in this product.

The top bolt holes do not match my 1997 F250. I will have to drill and tap a new hole for the too bracket to fit. Overall, very nice quality! Quick delivery as well

After reading lots of reviews on several mirrors, I decided to buy the K-Source Universal Towing Mirrors. Oh how I wish my truck could use the ones that slip over the existing mirrors! I was prepared for a fight, based on reviews, and boy did I get one! I truly needed a third hand when figuring out how to attach these. I was bound and determined that I could do this on my own. No mirrors were going to defeat me! I did ask my husband to come look at them. He started to help but I shewed him away. After a lot of words that don’t normally come out of my mouth and a few tears, the first one was on! Then I had to go do it again in the other side! I’m pretty sure the neighbors heard me yelling. But I persisted! Lo and behold, this 67 year old Grammy did it! It was clear they would not stay on by themselves, so I grabbed a couple of bungee cords and wrapped them around the housing and they aren’t going anywhere. I have left them on my truck. No way I’m going thru that every time we return from camping. I will take them off at the end of camping season. Delivery was really fast. I was disappointed that one box was brand new and the other was smashed and taped, an obvious return. I would have been very unhappy if there was a piece missing or if something was wrong since this was my first purchase with etrailer. Overall, the mirrors work, they do not shake and I find I don’t use the truck mirrors now. Very happy with my purchase.

When installing them for the first time on my 2020 Ranger, I had some trouble with them wanting to side off to the outside of the mirror. Eventually I got them to stay, but was worried they would fall off while driving. I got a piece of string and tied them to the truck mirror. I was very pleased while driving ,as they didn't come loose, and the picture did not vibrate much. Even still, I have tied them on every time I use them. Over time I have gotten pretty good at installing them

So far, so good. I received the CIPA mirrors today and immediately installed them. Installation instructions are straight forward. I took a test drive of about 15 miles; there was no noticeable shake or rattle and the mounts did not loosen. As with factory curbside mirrors, objects are closer than they appear with the CIPA mirrors, too. Our first trip towing is a couple weeks from now. I will update my review after the trip.

The view is excellent. The mirrors do not vibrate. In speeds over 50mph, the tube would turn inside the clamps and the mirrors would turn upward, making them useless. Solution: I cut off a finger from a nitrile rubber glove and pushed it over the tube. Now the mirrors stay put.