# 1
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.
# 2
Trailer Connector Adapter for Land Rover - 7-Way, Round Pin, European Style to 4-Way Flat
Great build quality, but unfortunately it will not work to legally use a 4-pin trailer being towed by a 7-pin Euro/Land Rover plug. Its simply mapping 4 of the 7 pins to the following pins on the 4-pin side. Left running, Right running, Stop and negative, there is no provision for indicators or dual sided brake lights. It needs diodes (which it does not have) to do this. etrailer just needs to update the description as this is a good basis to make various adapters.
Received product in good order, well packaged, initial some delay, manufacturer was chased by etrailer, and earlier dispatched by manufacturer; delivery trail clear stated, very good. On receiving verified at UHAUL: connect with 1983 Land Rover (Defender) 110 Stationwagon (photo: rear, while on transport): all functioned ok. Apparently some diode(s) included, as the 7 pin has individual stop light which translates as left AND right indicator on flat pin. Emergency flashing (all indicators left and right) tested ok at UHAUL (connecting to trailer). LR has European homologated 3.5 metric Ton (7700 lbs) tow hook and has done some 60,000+ miles towing with current odometer reading 578,000+ km (on/about 360k miles)
# 3
Pollak 7 Pole to 4 Way Connector Adapter
I wanted one with a LED tester built into it to "trick" my SUV into thinking I had a trailer connected when really it was just a bike rack so the car didn't slam in it's brakes while reversing thinking it was something else. So I bought a different adapter. The picture slightly deceived me into thinking this had LED tester because the plug is attached by a rubber string (that I thought was a wire). So add another picture of the other side and that would eliminate my confusion. 4 stars because it probably works the way 99% of people would want to use it for.
Everything worked out well. On time and fits perfect. Attach hitch setup and my new Ridgeline. It comes with a 2" inch receiver and I have a full compliment of 1.25. stuff from my previous car. All from etrailer i must admit! so I needed the 2-1.25 reducer, a good lock, and the 7-4 reducer for my goodies! Thanks for the grest service
# 4
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
Perfect . My new Subaru hitch has a flat plate to which the dealership attaché the 4-flat. I used “2 L-brackets” to accommodate the 90 degree bend of the adapter bracket.
# 5
7-Way RV to 4-Way Flat Trailer Connector Adapter
My truck has a dual trailer connection - 4 pole flat and 7 pin RV. When using my utility trailer, the spring loaded door on the 4 pole side exerts pressure on the trailer plug and wire, causing it to bend severely. Thinking this would be bad for wiring longevity, I ordered this adapter, which goes into the 7 pin side, and the plastic, sturdy body of the plug takes the force of the spring loaded door without the door touching the wiring. Then, the 4 pole trailer plug simply plugs into the 7 way. No more stress on the trailer plug!!
Works fine. Reasonable price. I'm happy that etrailer is around.
# 6
Hopkins Adapter 7-Pole to 6-Pole Universal with LED Tester - Electric Brake Center Pin
We are a U-Haul Dealer and bought this for use as a test device only. We need to test many vehicles trailer connections to be sure there are no issues before renting a trailer. Some vehicles have the trailer lighting connection mounted in a way that makes it impossible to see the lights on the testers. Of all the testers that are on the market, NOBODY makes one with the test LED's on BOTH sides of the unit. With the test LED's on the end of this unit you can always see them, regardless of the position the trailer socket is mounted! We have the same problem with the 4 pin testers. We purchased 2 different brands where one tester has the LED's on the top, the other has them on the bottom.
Your website led me to believe that this product could tell me whether the electric brake control on the tow vehicle works, without actually connecting the tow vehicle to a trailer. That is not the case, so I spent $20 on something I don't need.
# 7
Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
I just installed this on my 2015 Volvo XC70. I also used the Curt XC70 plug and Play for wire kit. I watch two of etrailers excellent insulation videos. Installing the hitch and both the wiring products took me around 3.5 hours. I think Curt products are great and they are reasonably priced! e-Trailer makes your DIY installations easy. You just need to take your time when removing interior panels and double check your work. I used Volvo's torque specs for the bumper parts when I installed the hitch. E-trailer doesn't stop with just hitches and wiring solutions, they have just about anything you need to load and haul overhead or behind safely. What about performance? E-trailers got you covered. If you get in a jam during the insulation, don't fret or worry, call the text at e-trailer and they'll walk you through it. I want to thank E trailer and their professional staff for helping me with my truck and auto towing and lighting solution for over 10 years now!
This was/is a critical piece of any towing system, and as such requires extra care to hook up properly . I would recommend testing each connection as you hook it up being extra careful to make sure you are matching the terminals in the mating connector properly. This harness/connector performs perfectly when properly installed.
# 8
Curt Universal Installation Kit for Trailer Brake Controller - 7-Way RV - 10 Gauge
I ordered this wiring kit for a 2003 Dodge Ram 1500 I recently acquired. The Ram was not tow ready but did have a factory 4-way. I also ordered hitch #13333. The wiring kit is very high quality and was easy to install. The 7-way fit perfectly where the factory 7-way would have gone. I'm using a Tekonsha Prodigy RF wireless brake controller so the blue lead was not needed but I left some extra should that change. Thanks etrailer!
Arrived on time and installing now
What our customers are saying:
"In these days of customer "no service" I am usually disapointed when doing business with people I don't know. It was refreshing doing business with you. I'm impressed!"