
Never get on your hands and knees again to install your bike rack or ball mount in your hitch. This stop collar sets the position so the hitch pin holes line up on your hitch and 2" accessory. Once installed, you don't need to readjust it.
When you're installing a bike rack or other hitch-mounted accessory, the last thing you want is to be on your hands and knees behind your vehicle, inching the rack back and forth just to find daylight through the hitch pin hole. Once you set the Yakima BookMark hitch pin alignment collar, it creates a fixed stopping point on the shank so the accessory can't go in too far. After that, you slide it in until it contacts the collar and the hitch pin hole is already aligned, so you're not repositioning it to find the correct spot.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbor, this is Curt with etrailer, and today we're going to take a look at the Yakima BookMark hitch alignment collar. Now, what this is going to really come in handy for is when you have those heavier hitch accessories that you do take in and out of the hitch often enough, one of the biggest frustrations people come across is getting that hitch pin hole lined up between the shank of their accessory and the hitch pin hole on the hitch itself. Sometimes, especially with heavier items, it could just take a lot of fooling around before you get it right, and that could just take up a lot of time. The BookMark is going to end up saving you time by making sure that it lines up perfectly every time you put it in. Now, this is made specifically for a 2 by 2-inch shank, but it could be used on bike racks, cargo carriers, even heavier ball mounts. As long as it's a 2 by 2-inch, it's going to work.
And the way that we're going to install this is it's just going to simply slip right over the shank, just like that. We're going to get it past our hitch pin hole. Then we're going to lift it up and get it into the hitch itself. So this is what the part that I was talking about. Sometimes getting that pin hole lined up perfectly can be a bit of a nuisance.
So, once we get it lined up, we'll get the pin in there. So after a little bit of fooling around with it, we got it lined up. We'll go ahead and insert our hitch pin. Now, for this part, you're going to need a 5-millimeter hex key like this. And the BookMark doesn't come with it, so you'd have to provide your own.
It's a pretty common tool, though, so you shouldn't have any problem finding one. But once we have our hitch pin in, we know that everything is going to be lined up right. What you need to do is push the BookMark up against the collar of your hitch just like this, and keep it flush with it. And then we're going to tighten it down. There's a set screw inside here.
It's going to pin it up against the shank of the bike carrier and keep it in place. And now with it tightened down, it's not moving anywhere. It's going to act just like what its name says, a bookmark. Every time we go to install this and slide it in right up against that, it's going to have our pin holes lined up perfectly for us to insert our hitch pin. And that's really all there is to it. It's a one-and-done installation. And if the aesthetics are important you, it comes in two different colors. You can get the black, which we just saw, or it also comes in a silver, just like this. Now, if after watching this video, you've still got some questions about the Yakima BookMark, go ahead and leave those in the comments below. We would love to answer those questions for you. It just helps you and other neighbors just like you to make the best decision for yourself. Once again, this is Curt with etrailer. Thanks for stopping by.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.







Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.