When you're hauling your prized bikes, staying visible matters. This LED bar lights up your brake signals, turn indicators, and flashers, so even if your ride runs past sunset, other drivers know exactly where you are and what you're doing.
Ever had a driver tailgating you, unsure if you're braking or turning because your bike rack blocks your taillights? This LED bar solves that problem. It syncs with your vehicle's lights, providing built-in brake signals, turn indicators, and emergency flashers to keep your intentions clear and your ride safer.
Low visibility is no excuse for low safety. This LED light bar keeps your bike rack illuminated, increasing your visibility to other drivers while you're in traffic or cruising down a dimly lit highway.
Unlike generic trailer lights, this LED bar is tailor-made for Hollywood Racks. It integrates seamlessly without interfering with your bikes, ensuring a clean, secure fit that won't shift while driving.
Nobody wants to spend their ride time wrestling with gear. This light bar attaches in minutes with a simple plug-and-play 4-pin connector, secure it to your CrossTrack rack, and hit the road with confidence. The included adapter ensures compatibility with most vehicles.
Rain, dust, and extreme temperatures won't dim this light bar. A weather-sealed design shields against moisture, while durable materials resist cracking from heat or cold. Built to withstand rough roads, it keeps shining mile after mile.
A quick roadside doesn't have to leave you invisible. Pull over to check a strap, fix a flat, or take a breather. Whatever the situation, the built-in hazard lights add a layer of safety and let other drivers know you're there, even in low-light conditions.
Does not include reverse/backup lights.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everyone, Steve here with etrailer.com. Today we're looking at our Hollywood Racks cross track bike rack mounting LED bar. That's right folks. This will give you brake tail and turn signal and it's gonna sync with your vehicle to give you clear, reliable signaling. And the brighter LEDs are gonna make it visible for drivers behind you. So it is rack mounted and it can secure or attach easily to your Hollywood rack without interfering with the bikes.
And as you can see in my image on the screen, you can have it face in whenever you have the, the rack folded up or you can have it folded down and have it shown there as well. It's an easy installation. You have all the gear here included along with the four pole connector. You get a seven blade to four pole adapter. You get a four pole wire tester so you can plug this into your vehicle to make sure you're getting all the signals correct.
You have hook and loop straps to mount this along with some brackets, cable ties and bolts as well. So lots of different ways and things to use and mount it with. And I wanna go ahead and get this lit up for you to show you what it's gonna look like whenever it's lit up. So right now I just have it on the brake light and then if I switch here we can go to we the left or right hand blinker and vice versa. Now I only have one wire here, but if you had the brake lights on and you had hit your signal, it would still flash and give you the brake at the same time.
Let's go ahead and shut off the overhead light so you can see this in the dark. So as you can see, pretty bright. Let me do a couple of the blinkers real quick, left and right just to show you the difference. And then if I zoom back out, give it a minute to clear up there. There we go.
The auto focus, I apologize, is gonna mess with this. So there we go so again, you have your left and right and then of course your break on. So I'm gonna go ahead and turn those lights back on. Again, I apologize for that auto correct there in the dark. Sometimes the light wants to to to zoom out on me. So this again has built-in emergency flashers as well. It's high visibility. Hazard lights will enhance roadside safety for you as well. It's 36 inches long overall. And again, you got a nice length of cord here that'll plug into the four pole connection. So it's gonna give you more than enough to come out to the back of the bike rack. And again, I'll throw those images real quick. So again, this is the Hollywood Rack's Cross Trek bike rack Mounting LED bar folks, that is gonna wrap it up for our look together. I'm Steven. Thanks for watching.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.