Hooking up different trailers usually means different hitch heights, and that can throw off your setup fast. This mount’s offset, adjustable design gives you up to a 6" rise or a 4" drop, so you can dial in the exact height you need to keep things level. The platform slides easily along the channel and locks in with the included pins and clips, so switching between setups is quick and steady every time.
Heavy trailers demand serious strength, and this one delivers it. The heavy-duty steel construction, 1/4" thick channel frame, and 3/8" welded gussets make it tough enough for real work. It’s rated for up to 10,000 lbs with the 2" ball and 14,000 lbs with the 2-5/16" ball, with a 2,000 lb maximum tongue weight capacity. The hitch balls are welded solidly to the platform for extra sturdiness, so you can tow with confidence on every run.
Ever needed to drop your tailgate only to find your hitch in the way? The offset layout keeps that from happening. It allows for both drop and rise positions without flipping the mount around, while maintaining clearance for an open tailgate. It’s a clean setup that saves you from constant removal or adjustments when loading or unloading gear.
Towing gear takes abuse from road salt, water, and grime. This mount’s matte black powder coat finish with a nickel undercoat and zinc topcoat helps resist corrosion trip after trip. The two included corrosion-resistant pins and clips stay protected too, so everything keeps working smoothly season after season without seizing or rusting out.
Different trailers call for different coupler sizes, and this mount has both ready. With a 2" ball and a 2-5/16" ball welded on opposite sides of the same platform, you can switch by simply pulling the pins, flipping the platform, and locking it back in place. It’s an easy way to stay ready for whatever you’re hauling next without swapping parts or carrying extra mounts.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors and friends. Steven here with etrailer.com. Today, we're looking at our BulletProof hitch with a two ball ball mount made for a two inch by two inch hitch with a nice offset. So folks, this two ball ball mount lets you hook up your trailer to maybe different tow vehicles. The box shank slides into a two inch by two inch receiver tube on the vehicle. This particular guy is a hollow tube.
You've got two 5/8 inch pinhole options here. The hitch pin and clip is sold separately. I recommend you getting a locking one just to protect your investment. You've got a four inch gusset up here and a six inch gusset here. Now for demonstration purposes, I chose to put the two inch ball on top, the 2 5/16 on the bottom.
That's just because the weight is perfect and I can have it here on the table. You can technically invert this, make any rise or drop you need according to the options that come with this. You also get a nice little tube of lubrication grease, and that basically is made to go on top of the balls, maybe on the shank here, as well, keep all those turning connections and sliding connections nice and lubricated. That way, they don't gum up on you over time or whatnot. It's made of a heavy duty fixed steel.
It is SAE J684 certified. You got two pin and clips here to hold the ball up or down, depending on your options of rise. It's ideal for vehicles with say a 20 to 21 inch clearance from the ground of the bottom of your receiver tube. So, wherever this is sliding into the bottom of that tube on the vehicle, you need between 20 to 21 inches. That's ideal.
It is a matte black powder coat finish. It's been heat treated. The steel withstands heavy weight and everything. As far as the pins, they are nickel under coated with a zinc top coat, and that's gonna give 'em a nice resistance to corrosion and also endure the strength and everything on 'em. Now, I will throw up an image here of some dimensions. Keep in mind there's a lot of dimensions on there. Tried to give you everything we could straight from the manufacturer. You can pause this video and go back to it if you need to see 'em. The whole weight of the product is roughly 29 pounds. It does have a limited lifetime warranty. I would say some of the most important measurements you're gonna need is overall height is about 14 inches tall. The length of the ball platform when it's installed is about 15 1/2 inches. And if you didn't have the ball on there, it would go down to 11 3/4 inches. Well, folks, this is rated for 10,000 pounds towing capacity with a two inch ball, and if you flip it over and use the 2 5/16, that's rated for 14,000 pounds. The max tongue weight is 2,000 pounds overall. Well, folks, I'm Steven. Thanks so much for looking at this BulletProof hitch with me today, again, for a two inch hitch. I'm Steven. Have a great one.
Ratings & Reviews
Very heavy duty and ONLY one rated to 36K and made in the U.S.A that means a lot to me.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.