Drop Ball Attachment for Shocker Bumper Hitches with 2" - 10K

Video Transcript for All You Need to Know About the Drop Ball Attachment for Shocker Bumper Hitches with 2"

What's up everybody. It's AJ with each etrailer.com. Today, we're been checking out this drop ball attachment, accessory, with a two inch ball, and it's gonna go with your shocker hitch shakes. So you're gonna have this, like maybe you bought one of the other combinations, that have the two drop or the two ball combination, or even the pencil hook. This is an accessory you can get on the side to switch it out. If you just need a little bit more drop, with your shake, let's check it out.

Look closer at our accessory here, is gonna have the drop ball mount here, and that's gonna be a black powder coat, gray, 50 steel. So it's gotta last, if you leave it on the back of your truck all the time even if it gets scratched up, it's gonna be really resistant to rust and corrosion. The ball itself is gonna be steel plated. So that's gonna help keep it protected as well, but still be careful when you're hooking up to a coupler, it can get scratched very easily, You might able throw some crease on there, and that might help it look nicer for a longer amount of time. Now, if you found you need that drop for your trailer, and maybe you have the two ball combination in there, and that one only has a five inch drop, which is gonna be my measured from the shake to where the ball is.

This drop ball is gonna give you seven and a half inches of drop. So if you need to get that low for your trailer you can with this attachment. Now, the only thing about that is, that you sacrifice is when you go put this in the rise position, it's gonna come out just even So you're not gonna get as much of a rise, but if this is the access you're buying, and you already got the other one, it's not that big a deal. You see, I can just put this back up there, now in that place it's just even with the shank. If you bought the combo ball, so you have that two inch ball and the two and five six teams one, and you regularly need both of them.

You will have to buy two different mounts, to put the two different size ball on there. Just because, this ones mounted on there, you have to tighten it down, and make sure it's torched in the position. And you'd have to take this off, and put the other one back on 'cause the whole point of our shocker hitch accessories, is to make it quick and easy. You should be able just to pull these clips, pins swap out the accessories so you can get the two, five or 16 fall and swap those out if like, but I would suggest just getting another amount, another drop ball, attachment, making that permanent amount, and then you can just swap the accessory instead. Overall, I think it's a great accessory you have especially you need that drop with your trailer.

That two ball combination just doesn't get low enough. I have this, you can just swap it out with those pins and clips really quickly. Plus you don't have to buy a whole new assembly, to store in the back of your truck. Well, I think that does it. Thanks for hanging out, I hope this helped..