Video Transcript for What to Know About the Firestone Connector for 1/4" Tubing, 1/8 NPT

Today we're going to take a quick look at the Firestone Connector for 1/4" Tubing with 1/8 NTP.This is going to connect between your 1/4" tube, on the one side it has that push to connect fitting, push our airline in, and then push it in a second time, and then it'll lock into place. So even when we pull on that 1/4" tubing, it's not going to come out. If you do need to remove it, just press in on the collar, and then remove the tube.The other end has that 1/8 NTP, or national pipe thread fitting. It's going to be an adapter between connecting your airline to any component that has that same 1/8 NTP valve.Now this does come as a single unit, with part number F3454-1 here at etrailer.com. But if you use that same part number, minus that dash 1, it'll actually give you six of these at once. So if you use F3454, that's a quantity of six.

So you can get all your connections made that you need to.As far as overall measurements, our valve is about 1" long, without the threads in place, it's about 5/8" long. The hex bolt here, tighten it into place, is about 1/2".This does come with a two year limited warranty from Firestone.That's going to do it for our look at the Firestone Connector for 1/4" Tubing, 1/8 NTP.