Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This adjustable, left-hand, UTV side mirror attaches to your roll cage for superior visibility.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the CIPA UTV Roll Cage Mounted Side View Mirrors. For the left side, the part number is CMM37. For the right side, part number is CMM38. We've already got the passenger or the right side, that's been installed on the UTV. I wanted to go over what you're going to get. Of course we're going to have our mirror with the fully adjustable base and fully adjustable angle. We're going to have the bracket or the strap that goes around the roll bar.
This is going to accept anywhere from an inch and three quarter all the way up to a two inch roll bar. You don't have to worry about it not working. We're going to have the rubber gasket or rubber gripper that's going to go inside of that. That way once we have our mirror mounted on the UTV we don't have to worry about this losing its position. We've got a mount. The mount's designed to have a lock washer on it, go through our clamp, another lock washer and a nut.
The inside of our mount's threaded and we'll be putting our mirror into that before we start our install here. Just as easy as threading this right onto our mirror. We want to snug this down. That way we won't have any movement or vibration coming from our connection point. We have that nice and snug. We can set that aside for just a second.
Now let's get our clamp around the bar of our roll cage. Now as you can see, we do have a windshield that's mounted here on the front of the UTV. It's flexible, so it's going to give us enough room to get around our bar. One thing we will want to avoid though, you see these wires that we've got here for our light bar We don't want to get our clamp around those. We want to tuck our clamp in behind that, okay Just kind of spread our clamp out a little bit here to kind of help us get it into position.
Bring it back and around just like that. See how our wires, they're still out here, so we're not pinching those. We don't have to worry about any damage there. It really slides in perfectly right behind that windshield. We've lost no functionality of our UTV at all. Now let's get it into the position we want it. Then we'll kind of squeeze our clamp together here a little bit. That's going to help us when we want to put our mount through, which will be our next step. Mirror mounts- oh before I tell you the wrong thing, lock washer goes on. Then we'll bring this into our clamp. I found that sometimes with these clamps, having a pair of pliers to kind of pinch that together can help you get everything lined up. That rubber will kind of pull that one around. All right that should be good. Pull through both portions of our clamp. Place our wing nut on and then we'll get our nut started on there. All right with that started, we'll grab our wrenches and we're going to start putting a little bit of torque on it. They've got that powder coat finish on there so as you initially tighten it down it might be a little bit tight, but then it loosens up as you get in a little bit. Now we just want to get that started, we don't want to tighten it up fully yet because we still need to adjust the positioning and figure out exactly where we want this to be mounted to give us the best view. We can kind of adjust that around. Grab a seat in the UTV, figure out where it's going to work for us. All right I got to adjust it there. Make sure that you've got a range of adjustment. Not everybody's going to be the same height getting in there. They're going to want to adjust this to conform to them. I guess unless you don't let anybody use your ATV, but what's the fun in that That's going to allow them to adjust it for them as well. Be good for you because they won't hit any trees with your side by side. Now it's just a matter of getting that clamp tightened on down. It's a very simple process, very easy installation. We know we've got it approximately where we want it. Now that everything's nice and firmed up let's just dial that back in. All right perfect. Should keep me from hitting any trees or any cars. Also going to be handy if we're hauling a trailer with wood or something like that and we need to get it back to the house. Now that we've seen how the CIPA UTV Roll Cage Mounted Side View Mirrors are going to work, we'll take it out and let you see what they look like in action. .
Ratings & Reviews
Mirror is overall a good product. Be careful tightening, the bolt will twist off. It is a fine balance between keeping the mirror tight enough to keep from moving and twisting it off. Once on, they work well.
I am totally satisfied with my new mirrors. Easy to install easy to adjust. Large viewing
area. could not ask for more
Installed today. Look good and will be testing soon. Should work great and appears to be excellent product for the money
Placed it on my Kawasaki Mule, it's perfect, might even get one for the other side and maybe one for my rowing shell
Received mirror 8/29/12 and installed on JD Gator. It met all advertised claims. It works well and I'm satisfied.
Thanks
Is as advertised, adapting to small tractor, worked out well.
Also easy ordering and fast delivery,
Works great. I should have gotten one sooner if only for safety's sake!
The mirrors are of excellent quality and are just what I needed. The only suggestion I can make is that I would like to see included a smaller size clamp, with the large one, so as to clamp to ATV racks.
Mirrors were as expected, I am going to mount them on my John Deere tractor
Pleasure doing biz with you.
Product was exactly what I anticipated. Insulation was easy & quick. Very pleased.
EZ installation and works great on my side by side!
Great mirror for my Polaris Ranger. I have been looking for a mirror for quite a while and found it on e-trailer.
No way will it fit my Kawaski 250 handlebar. The clamps WAY to big!!
Very happy with the price & shipping was quick
this is just what i wanted. the band that holds it to the bar needs to be about half an inch bigger because i couldnt use the rubber pads, it just wasnt big enough but i managed.. works wonderful, love them,.......
Very satisfied with your product the mirrors worked out well looking forward to shopping again at your site
Worked well on a Polaris 800. Installation and adjustment was quite easy. Tested on Gravel roads and works well with little to no vibration.
I bought these mirrors for my utv they fit perfect and look great. Very good quality. And super fast shipping.
This was the perfect addition for my John Deere tractor.
Without the utv mount, all I had to do is drill a hole on the loader arms and attach this mirror. Works great, exactly what I wanted. Although I have a compact tractor, the mirror is big enough to work on larger sized tractor as well. Great price, quality and delivery!
Mounts are cheap plastic and can't secure them tightly for fear of breakage, so they're hard to keep focused on what's behind you. For a rear view mirror, they're too small which could be a safety issue. Will be looking for something better. A waste of money in my opinion.
All of the products that I have received from etrailer to date have been great and the service and communications are exemplary. Previous purchases include a whole list of trailer hitches, brake controllers, wiring devices etc. Not so with this mirror.
I knew that I was in trouble when the warning on the bag said to not tighten the nut on the stem to more than 7 inch/pounds. Not foot/pounds mind you, INCH/pounds. I don't have a torque wrench that goes that low and doubt that you can find one outside of a research lab.
The reason was apparent enough. The soft plastic stem is inadequate for the service intended and causes the mirror to vibrate excessively when mounted to the UTV and the engine is running.
Will I order from etrailer again? YOU BET I WILL, but it won't be for another one of these mirrors.
Glad to find a mirror that would fit large tubing on a Kubota RTV, but it was still a stretch to get the bracket to fit. Wish the mirror was more rigid since it has substantial vibration.
John S.
5/20/2022
These mirrors really werent the best option. The vibration was a nuisance, and they would have to be adjusted every time the UTV was trailered or when driving through light branches. One of my kids broke one of these mirrors, which was not a fault of the design, but I found mirrors Im much happier with on [online]
The mirrors are as advertised and fit my ATV perfectly. They are a very good quality and overall, I’m happy with them. My only negative feedback is that they push in too easy. I know it’s designed to do that in case you hit some heavy brush or tree limbs on the trail. But my ATV is also driven on the streets here in Arizona and the wind at 55 mph pushes the mirrors in. I wish there was a way to tighten this. Otherwise a very good product and it was delivered a day earlier than expected. They are installed and look great.
The picture didn’t do it justice. The mirror is exactly the same. The bracket didn’t look like the bracket I have but it worked out great!
Do you have a question about this ATV-UTV Mirror?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Chris
2/11/2022
When I first installed the mirror, I thought it was just right for my John Deere tractor. However, after a month or so the vibration of the tractor caused the mirror to loosen and I had to re-tighten several times because it kept on happening. After a while with re-tightening constantly, the mounting bolt on the mirror stripped. I thought the mirror would have held up better than it did. The mirror is useless now. :-