Battery for Using Badlands 2,500 lb Winch

Question

Question:

I have a badland 2500lb winch on my quad I plan to use it to pick up my ice shanty and some equipment total weight is no more than 200to 250lbs maybe once or twice a day what battery should I get per cca . I have a 2007 Suzuki Lt-A450X king quad

asked by: Rick S

0

Expert Reply:

The Badland Winch 2500 has an amp draw of 132amps at 2500 lbs. I know you wouldn't be using at it's capacity but I would go with a higher rated battery like the Bright Way Deep Cycle part # BRW94FR which is rated for 100 amp hours.

expert reply by: Jameson C

0

Answer 1

The amount of cold cranking amps you need depends on how much you plan to lift/pull. The Badland Winch 2500 has an amp draw of 132amps at 2500 lbs, so any car battery should do. I would recommend including a charger in your setup. I recommend the…

view full answer...

Answer 2

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The determine the correct replacement leaf spring on your 2021 Coachmen 259FKDS you'll need to lift your trailer frame so the spring is hanging freely and then measure from center-eye to center-eye, then for the equalizer you need to measure…

view full answer...

Answer 5

Hey Darrel, we actually have exactly what you are looking for with the part #TRU52FR which is for a 7k axle and is 25-1/4 inch from eye to eye. This is also a 6 leaf spring as well. The spring you referenced would be too short.

view full answer...

Answer 6

Hey Mark, I looked up the specs of the spring you have now and found that it is a 24-3/4 inch long spring from eye center to eye center and for a 7k axle. So that means that the replacement spring part #EM28AJ that you referenced will work great as a…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

There is no exact way to determine the leaf spring length. The best way to determine the length for a replacement is by measuring the existing leaf springs. The hanger distance and shackle length can help you get a good idea, but you're looking…

view full answer...

Answer 9

Hey Bekzod, So while we don't have a way of knowing the exact leaf springs for your Arctic Wolf 5th wheel trailer, I can help you determine the correct replacements. You do have to take a measurement, though it's pretty easy, as all you need…

view full answer...

Answer 10

Hey Richard! How did you measure your current leaf springs to get the 25-1/2" eye to eye measurement? We recommend jacking one side of the trailer up to get the weight off of them before measuring because they stretch out quite a bit over years…

view full answer...

Answer 11

You are indeed right to think this way. When picking out the appropriate leaf springs for your custom built trailer you will want to choose them based on what the actual loaded weight of the trailer will be. Just make sure that the leaf springs have…

view full answer...

Answer 12

Hello Mark, thanks for reaching out. When replacing leaf springs, it is important the new springs are identical in length to the old ones. There is a small amount of tolerance, like 1/2" or less, but any more than this can throw the suspension…

view full answer...

Battery for Using Badlands 2,500 lb Winch

Product Page this Question was Asked From

Continue Researching