Brake Controller Wiring Harness Location on 2015 Land Rover LR4  

Question:

Expert Reply:

Thanks for the picture. I would be happy to help you. I can't see a connector in the picture you sent but that doesn't mean you don't have one. The plug and wiring harness will be behind your brake pedal. I have attached a couple of pictures to help you find it. If you do have the plug you will need the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3035-P to connect the Tekonsha Prodigy P2 Trailer Brake Controller item # 90885. If you do not have the plug then your 2015 Land Rover LR4 does not come with the towing package and you will need to splice into that wiring harness and use the pigtail that came with the Prodigy P2.

If you have a 4-flat and don't have a 7-Way connector I recommend the Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires item # ETBC7. The kit includes a pre-wired 7- and 4-way trailer connector that mounts easily at the rear of your vehicle with an included bracket. This kit is designed for use on a vehicle with an existing 4-way flat trailer connector and plugs directly into it. You will then connect the blue wire to the blue wire on the brake controller, connect the black wire to the positive post on the vehicle's battery, the white wire to ground, and the yellow wire to vehicle's reverse circuit if applicable. This will provide you with the ability to control your trailer's brakes and also provide you with a 12v power wire for you trailer's accessory lights.

expert reply by: Jerred H

0

land rover 2015 wiring harness
(click to enlarge)

land rover 2015 wiring harness
(click to enlarge)

customer pic land rover
(click to enlarge)