Troubleshooting the Voyager WiSight Wireless RV Backup Camera System

Question:

My monitor on displays a “white” screen and no A/V indications. Confirmed 12v to the monitor.

asked by: Mike

Expert Reply:

My first thoughts on your Voyager WiSight Wireless System, # WVOS541, are, there is an issue getting a strong wireless signal. You've checked power to the monitor but what about the camera and antennae, please verify that too. If you are getting the 12v power to the antenna you may still have issue with the connection though. I suggest thoroughly cleaning the antennae and checking for damage. If you need to replace, I recommend using # PXXHD0006301R.

expert reply by: Michael R

Harry G.

7/16/2024

My unit goes blank after 1 minute and is locked in channel 4. Any suggestions?

Bryce D.

7/16/2024

@HarryG I did some research and it looks like others who had the same issue came to the conclusion that the monitor was bad. Unfortunately it looks like the monitor has gone NLA so you're not going to be able to get a replacement. You might be able to contact Voyager and see if they have one they can send out, otherwise you'd need to upgrade your system to the newer Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR.