What is Amperage Draw of Advent Air RV AC unit part # ACM135C

Question

Question:

what is the running amps on high speed fan cooling? 2. What is the sound level in decibels?

asked by: Tommy L

0

Expert Reply:

The Advent Air RV AC unit part # ACM135C draws a max of 15 amps when in full use, the compressor when running draws 9.9 amps and if the fan motor was just running would draw 2.6 amps. The decibel rating is 76.

expert reply by: Jameson C

0

Answer 1

None of the AC units for an RV are 12V or 24V. They all are 120V. I'll use the Advent Air for example: Advent Air RV Air Conditioner - 13,500 Btu - White #ACM135. Rated: 120V. Air conditioner power draw (while running): 15 amps. Compressor power…

view full answer...

Answer 2

You'll want to use a 20 Amp breaker for an 13.5K BTU Advent Air air conditioner. If you'll be adding any more AC loads to your enclosed trailer now or in the future, I recommend looking into power centers like part #PD4135K. These will give…

view full answer...

Answer 3

Since the 2023 Palomino backpack pop up camper 1240 is a smaller camper compared to travel trailers you could get away with a smaller BTU unit like the Advent Air RV AC unit part #ACM135C which comes with everything needed to install as well. It…

view full answer...

Answer 4

The Atwood #AT15028-22 Air Command Rooftop Air Conditioner w/ Heat Pump requires a dedicated 20 amp circuit. For a 20 amp circuit, the smallest acceptable wire gauge would be 12 gauge. Given the size of the space, this particular unit would work…

view full answer...

Answer 5

I attached a picture that has all of the dimensions of the Advent Air Conditioner unit part #ACM135C relative to the vent opening that you asked about. From the front of the unit to the front of the vent opening measures 5-1/4 inches.

view full answer...

Answer 6

The Advent Air RV Air Conditioner w/ Air Distribution Box and Start Capacitor - 13,500 Btu - White #ACM135C will come with the roof gasket. The only items you may need are some wire nuts, electrical tape, and possibly some additional wire if you…

view full answer...

Answer 7

The Advent Air RV Air Conditioner System #ACM135C clamps to the roof of the RV using four bolts that pass through the air distribution box, up through the 14" x 14" cutout hole and thread into the weld nuts in the rooftop unit. This portion…

view full answer...

Answer 8

No, it is not necessary to use sealant when installing the Advent Air Rooftop RV Air Conditioner #ACM135C on your trailer. This unit is designed so that is not necessary because it has a thick gasket that prevents water from leaking in. I have added…

view full answer...

Answer 9

Yes, the installation instructions that came with your Advent Air RV Air Conditioner System #ACM135C are correct. You tighten the bolts to 40-50 inch pounds. This compresses the gasket to approximately 1/2". Since the bolts are self locking,…

view full answer...

Answer 10

So there's a few things that are going to be needed in order to install the Advent air conditioners, and for a tent trailer I do recommend going with the smaller 13,500 Btu. But the first thing you need to do is ensure you have a roof that is…

view full answer...

Answer 11

Yes, the Advent Air RV Air Conditioner System #ACM135C will come with everything needed, besides tools and wing nuts/butt connectors for the wiring. This system works with both ducted and ductless systems so it will work with your current setup. The…

view full answer...

Answer 12

Hello Tyson. The smallest AC unit we offer is the Advent Air Low Profile RV Air Conditioner and this will be a great option for you. Since this is a smaller trailer you can definitely get away with a 13,500 BTU unit. These AC units require the roof…

view full answer...

What is Amperage Draw of Advent Air RV AC unit part # ACM135C

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching