Availability of a Trailer Coupler that Fits a 3-1/2 Inch Wide Tongue
Products Featured in This Question
Question:
Is there a coupler made to fit a 3 and a half inch wide trailer tongue?
asked by: Morris Q
0
Expert Reply:
If the trailer tongue in question is 3-1/2 inches round then you can use Bulldog coupler # BD028383. If you have a square or rectangular tongue then a 3-1/2 inch wide straight coupler is not available.
You may be able to use a channel bracket like # BDAC3000300, weld it to the end of the tongue, and then use coupler # BDA200C0317.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Fulton Fas-Lok Coupler, 2" Ball, 2" Channel - 3,500 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 2 Inch Ball Coupler
- Bolt-On
- 3500 lbs GTW
- 2 Inch Channel
- Trigger Latch
- Fulton
more information >
Continue Researching
- Video: Review of Demco Weld-On Gooseneck Coupler Head Assembly - DM93KV
- Video: Review of Dexter Straight Tongue Trailer Coupler - A-60 Coupler - T4845000
- Q&A: Can I Take the Inner Tube of the Ram Gooseneck # GCSQTW-30008 and Put it in My Outer Tube on Trailer
- Shop: Demco eZ-Latch Gooseneck Coupler - Square Inner Tube - 2-5/16" Ball - 30K GTW
- Shop: Demco eZ-Latch Weld-On Gooseneck Coupler Head Assembly - Black - 2-5/16" Ball
- Shop: Dexter Zinc-Plated, A-60 Coupler - 2" Ball - 3" Channel - Bolt On - 5,000 lbs
- Search Results: bulldog gooseneck coupler
- Shop: Demco eZ-Latch Weld-On Gooseneck Coupler Head Assembly - Raw - 2-5/16" Ball
- Shop: Demco Gooseneck Coupler Outer Tube - Square - Weld On
- Shop: Bulldog Gooseneck Coupler - Adjustable - Square - 2-5/16" Ball - 25,000 lbs
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K
- Search Results: trailer plug
- Search Results: hopkins trailer plug
- Search Results: rv vent door
- Shop: Roof Rack
- Q&A: Measurements of the Deluxe Compartment Door Key Lock
- Search Results: safety chains
- Shop: Trailer Wiring
- Search Results: coupler only
- Q&A: Replacement Surge Brake Coupler For a EZ Loader Boat Trailer With Disc Brakes and Obsolete A-50 Coup
- Q&A: 2005 Ranger Trail Boat Trailer Replacement Hub Bearings and Races for Oil Bath
- Video: The Low-Down on the CE Smith Bow Roller Assembly with Bells for 4" Wide Bracket
- Video: Feature Review Demco Channel Tongue Trailer Coupler
- Q&A: Solution for Brake Actuator on 3-1/2" Trailer Tongue
- Search Results: water pressure regulator
- Q&A: Dimensions Of Coupler Ball Release Lever On Demco Channel Coupler EZ Latch
- Article: How to Bleed Your Trailer Surge Brakes
- Video: All About the Bulldog Cast Head Coupler w/ Wedge Latch
- Video: In-Depth Review of the Buyers Products Straight Tongue Trailer Coupler
- Q&A: Mounting Hole Dimensions & Spacing on Bolt-On Channel Tongue Trailer Coupler CT-2001-Z