How Do You Purchase the Data Plan for the Furrion Access WiFi Router/Booster

Question

Question:

Who do we have to purchase a data plan from? if we by the furrion system. My trailer is set up for it. But I have no info on a service provider

asked by: Shannon

0

Expert Reply:

The data plan needed for the Furrion Access WiFi Router/Booster part # FAN17B8B will be purchased through Furrion, Furrion Access specifically. Once you obtain the device, there will be a telephone number on the back of the box that you will call to register the device and set up a data plan for using the serial number on the actual device. The process would be very similar to setting up a phone through a provider such as AT&T, Verizon, Etc.

expert reply by: Conner L

0

Sherri J.

6/11/2025

Hi Conner I’m trying to purchase a data plan and can not seem to find what I need to do to get it. We bought our fifth wheel and this system was already installed. No data thou of course. Can you tell me how to go about getting the data I need to get WiFi? Thank you Sherri Johnson

Reply

Nick S.

6/11/2025

@SherriJ You are going to want to take a look on the back of the box. There should be a phone number to call to register your device and set up a plan through Furrion. There is a serial number on the device you will use to do so. IF for some reason you cannot find anything on the device I recommend giving Furrion a call directly since they handle the actual data plan themselves and get that set up for you.

Reply

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

For a replacement for your Dometic B59516.711J0 AC we have the #ACDOM150 (white) or #ACDOM150B (black). These are directly compatible with your current Dometic setup so it will be a plug and play installation. The dimensions are 31-3/16" long x…

view full answer...

Answer 4

The Dexstar Conventional Steel Wheel with Offset - 14" x 5-1/2" Rim - 5 on 4-1/2 - Black #AM20304 you referenced is a conventional wheel that should work with most baby moons. We have baby moons #AM90086 that I can confirm as a fit that…

view full answer...

Answer 5

I was able to confirm with MaxxAir that the Replacement Control Plate for MaxxFan Roof Vent part #MA05-20226K is correct for a MaxxAir Vent Fan Model 4951KSC. The key pad holes are only used on certain models so if yours does not have this they will…

view full answer...

Answer 6

Yes, you can just purchase the Pro Series 20K Fifth Wheel Head Assembly, Head Support and Handle Kit, item #30118, to go on the slider assembly, item #RP30048, that your 16k head assembly #RP30051 is attached to now. Reese and Pro Series are both…

view full answer...

Answer 7

Since the Slider, part #RP30048, for the Reese 16K 5th Wheel Trailer Hitch #RP30051 is rated for the Reese 15K, 16K, and 20K 5th-wheel trailer hitches all you will need to do is replace the head and head support. The correct head and head support to…

view full answer...

Answer 8

Yes the Pro Series hitch head part #30118 would fit the same leg kit as your 15k Reese fifth wheel hitch.

view full answer...

Answer 9

To replace the head on your Pro Series 15K Trailer Hitch to a higher rated 20K head, you will use part #30118 referenced in your question. This is compatible with the base of the Pro Series Slider you already have for your Silverado and will upgrade…

view full answer...

How Do You Purchase the Data Plan for the Furrion Access WiFi Router/Booster

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching