How To Install 13 Inch Tires On A Right on Trailer Multi Sport Trailer
Products Featured in This Question
Question:
I bought a small trailer a couple years ago Its the Right on Trailer Multi Sport Trailer. It comes with small 8inch tires. My problem is the tires are not really rated for highway use and I live in an area where 20 minutes up or down the highway provides endless fishing, and Id like to take the trailer to Maine with me the few times a year I go. I bought a set of 2 ply tires ST175/80D13, 4 bolt 4 and immediately found out they dont fit. So my question is this: I know Ill probably have to switch axles and such, but where do I start? I need the hubs to stick out roughly an inch from the current ones and need maybe 2 more inches of clearance up so the tire would fit under the fender. I only use it for my 60lb kayak so weight isnt really a factor, only being able to take it at highway speeds. Thanks!!
asked by: Kris
Expert Reply:
The first step in order to replace the axle on your Right on Trailer Multi Sport Trailer is to take a few measurements, the spring center and hub face (see photo). Once we have these we can get you setup with one that will allow you to use your ST175/80D13 tires and wheels. For example, the CE Smith Trailer Axle Beam part # CE33201GA has a 57-1/2" hub face and 46-1/2" spring center. The spring center however can be moved.
Please note you most likely are not going to be able to clear the fenders with a new axle but what you can do is remove the ones you have now and install the CE Smith Single Axle Trailer Fenders part # CE19503-2 with the Mounting Brackets for Trailer Fender part # CE26098G-2.
Product Page this Question was Asked From
CE Smith Trailer Axle Beam with Standard Spindles - Galvanized - 57-1/2" Long - 1.8K
- Trailer Axles
- Leaf Spring Suspension
- Marine Grade
- No Hubs
- 1800 lbs
- Spindles Only
- 46-1/2 Inch Spring Center
- 57-1/2 Inch Hub Face
- No Drop or Lift
- CE Smith
more information >
Continue Researching
- Search Results: trailer fenders
- Search Results: ce19503~2
- Shop: CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 2
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Video: All You Need to Know About the CE Smith Single Axle Trailer Fenders w/ Top and Side Steps
- Video: Ultimate Overview of the CE Smith Galvanized Steel Step for Trailer Fender
- Video: Redline Trailer Fenders PF775-BKT-2 Review
- Shop: CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1
- Shop: CE Smith Trailer Axle Beam with Studded Hubs - 5 on 4-1/2" - 54" Long - 1.8K
- Shop: CE Smith Single Axle Trailer Fender w/ Top and Side Steps - Black Plastic - 13" Wheels - Qty 1
- Q&A: Boat Fender Replacement Recommendation for Black Fender and 13" Wheels
- Shop: Galvanized Steel, L-Shaped, Bolt-On Brackets for Plastic, Single-Axle Fender PF775X21W - Qty. 2
- Shop: Fulton Single Axle Trailer Fender with Top Step - Black Plastic - 13" Wheels - Qty 1
- Q&A: CE Smith Single Axle Trailer Fenders CE19503 Mounting Dimensions
- Q&A: Mounting Hole Dimensions of CE Smith 12" and 13" Plastic Single Axle Fenders
- Q&A: Recommendations For Increasing Fender Clearance With Larger Tires On a Single Axle Boat Trailer
- Q&A: Plastic Trailer Fender with Bracket Dimensions of Inner 30 inch and Outer 34
- Q&A: Recommended Mounting Brackets For CE Smith Single Axle Trailer Fenders w/ Top and Side Steps
- Q&A: Mounting Brackets For CE Smith Single Axle Trailer Fenders With Top and Side Steps
- Search Results: fender
- Video: In-Depth Review of the Single Axle Trailer Fender w/ Backing Plate
- Search Results: spindle castle nut
- Search Results: hub assembly
- Search Results: spindle nut
- Search Results: ce smith trailer axles