Recommended Replacement Landing Gear for 2007 Pilgrim 40 Foot 5th Wheel Trailer
Products Featured in This Question
Question:
Landing Gear Recommendations for a 2007 Pilgrim 40 fifth wheel.
asked by: Todd M
Expert Reply:
On your 2007 Pilgrim 40 foot 5th wheel trailer, I recommend using the Ultra-Fab Deluxe Electric Landing Gear Set - 38" Lift - 12,000 lbs # UF17-943010. This landing gear will allow you to adjust independently for easy and quick leveling. The leg will travel 1 inch every 15 seconds and has drop legs for even faster compatibility. I've attached a diagram for you to see the connection points based on the weld stops so you can determine if it will bolt right in or if modifications to your brackets are needed.
If you want more of a basic system with a lead leg and follow leg with a single motor and switch, then I recommend the Stromberg Carlson Electric Landing Gear Set - Weld On - 34-7/8" Lift - 6,500 lbs # LG-3 has a 29-1/2 inch leg length and the # LG-4 has a 33-1/2 inch leg length. These have either 17-1/2 inches between the weld stops or 19-1/2 inches. This will be the biggest determining factory for fit so I've attached photos to assist.

Product Page this Question was Asked From
Bulldog Velocity Series Electric Landing Gear Jack - with Remote - 24" Lift - 12,000 lbs
- Camper Jacks
- 5th Wheel Camper
- Landing Gear
- Side-Mount Jacks
- Steel
- 10001 lbs or More
- Electric Jack
- 24 Inch Lift
- Bolt-On
- 1 Jack
- Bulldog
more information >