Troubleshooting Low Propane Pressure to Grill
Updated 01/29/2020 | Published 10/19/2018 >
Question:
I have a travel trailer with an outdoor stove. I’ve purchased a gas hose from my quick disconnect to my Coleman gas grill. I get gas to grill , but not enough to cook on. I’m tuning thru camper regulator then the grill regulator. This combination reduces gas flow to almost nothing. How can I get around this issue? Thanks
asked by: Carl L
Expert Reply:
Propane cannot be over-regulated so assuming both regulators are rated the same the output will be the same. It sounds like you may have a leak that is causing you not to get the appropriate amount of pressure to your grill or potentially a faulty regulator. Sometimes propane hoses can get clogged as well but since you mentioned you have a new hose we can likely rule that out.
What I recommend is using the Camco Propane Cylinder Gas Gauge and Leak Detector # CAM59023 which will tell you if you have a leak that is causing the flow to be reduced.
I have added a link to a video review of this detector as well as links to a pair of help articles on propane which you may find useful.

Product Page this Question was Asked From
Camco Propane Cylinder Gas Gauge and Leak Detector
- Propane Fittings
- Adapter Fittings
- Type 1 - Female
- POL - Female
- Type 1 - Male
- Camco
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What is Difference Between GE Hotpoint Mini Fridges GE93FR and GE43FR
- Q&A: Recommended Hoses and Regulator to Connect 100 Pound Cylinder to Main House Line
- Q&A: Is the 15K Btu GE Appliances Deluxe Plus RV AC the Same as AR15AACW
- Q&A: Does Hughes Portable Power Watchdog Surge Protector Need to be Plugged in to Communicate with App
- Q&A: Can Type 1 Propane Connector be Used for Propane Tank with Threads on Outside
- Q&A: How to Reset Zero Point Calibration on Lippert Ground Control 3.0
- Q&A: Differences Between MaxxAir 2 and MaxxAir Standard Vent Covers
Bob G.
1/28/2020
I just purchased a new two-stage propane gas regulator with pigtails. do I need to use yellow Teflon tape or can I use the white Teflon tape for my connections??