Troubleshooting Tekonsha P3 Brake Controller that Constantly Shows Braking Output Reading
Updated 11/10/2021 | Published 05/17/2018 >
Question:
This season I have been having an issue with my Tekonsha P3 brake controller, I did not notice this last year. Everything seems normal while I am braking, however when I let off the brakes instead of returning to 0.0 it will often stay at 0.6 or 0.8, etc. Some time it will even increase from there. Similarly, when I am stopped at a light/sign and then accelerate, the brakes will often stay on not locked up often in the 2 - 4 range which is obviously very noticeable. To get the controller to return to 0.0, I simply tap the brake pedal gently and it will return to zero. Also, the controller will occasionally jump up when I hit a bump. Any thoughts? Is this a truck side brake sensor issue 2007 Suburban 2500? Thank you!
asked by: Matthew B
Expert Reply:
The issue is the red wire of yoru brake controller. It's only supposed to see voltage when the brakes are applied which then tells the P3 # 90195 to start looking for deceleration and apply proportional braking power. If there is a short on this circuit and there is voltage on it all the time the controller is basically active all the time and will apply the trailer brakes with any change in inertia.
So what you'll want to do is check the red wire of your brake controller for a short to the black wire of the controller and fix as needed and you'll be set.

Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LCD Display
- Multiple Trailers
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Proportional
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Tekonsha Prodigy RF Wireless Brake Controller - Trailer Mount w Remote - 1 to 3 Axles - Proportional
- Search Results: road armor
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller w/ Custom Harness - Up to 4 Axles - Proportional
- Shop: Trailer Hitch
- Search Results: tekonsha 90195
- Search Results: tekonsha p3
- Search Results: brake controller
- Search Results: curt hitch
- Search Results: weigh safe hitch
- Search Results: alltrek 4000
- Shop: Draw-Tite Activator IV Trailer Brake Controller w/ Custom Harness - 1 to 4 Axles - Time Delayed
- Video: All You Need to Know About the Tekonsha Prodigy RF Wireless Brake Controller
- Shop: Vehicle Sway Bars
- Shop: Tekonsha BRAKE-EVN Trailer Brake Controller w/ Plug-In Harness - 1 to 4 Axles - Proportional
- Video: Viair Portable RV Air Compressor Kit for 5th Wheels and Travel Trailers: The Breakdown
- Video: Viair Automatic Portable Air Compressor: The Breakdown
- Q&A: Troubleshooting a Tekonsha P3 Brake Controller With Trailer Brakes That are not Showing Power
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Q&A: Blue Ox SwayPro VS TrackPro Weight Distribution System
- Q&A: Which Hangers Should MORryde X-Factor Crossmembers Install On
- Q&A: Tekonsha P3 Brake Controller 90195 Displays Message Output Shorted No Brakes
- Q&A: Is it Normal For The L-Brackets On Blue Ox Track Pro Weight Distribution Hitch To Pitch Forward?
- Shop: Suspension Enhancement
- Q&A: What Stops Porpoising on Tow Vehicle that is Using Weight Distribution with Trailer
- Q&A: Can the Tekonsha P3 Trailer Brake Controller be Reset
Tanner B.
11/8/2021
Did you find a solution? I am having the same issue with my 07 Silverado 2500. I am showing output voltage as soon as I turn the key, even with the trailer disconnected. I double checked all the wiring connections and everything looks good. I am stumped.