Recommended Size of Ramp Spring for 7 x 16-Foot Enclosed Trailer

Question

Question:

what size ramp spring fits a 7x16 enclosed trailor?

asked by: Khales M

0

Expert Reply:

Since a 7-foot trailer width is 84-inches the nearest ramp spring size will be the 81-inch size like # ERS120D81. The linked review video will give you details on this item. All ramps springs are shown on the linked page.

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install this system.

expert reply by: Adam R

0

Answer 1

To find the correct replacement axle it is very straight forward. You want to know the Axle weight rating. This is going to be on the sticker found on the cross tube of the axle if this is not present measure the axle tube diameter and that can help…

view full answer...

Answer 2

To determine the correct weight springs you will need a scale to determine how much weight is on the door when it lays out on the ground. You will place the scale on the ground in the center of the landing path of the door edge. This will tell you…

view full answer...

Answer 3

It looks like the best option is going to be single-spring system #362SA8. It is 94 inches wide total but it can be adjusted from 45-1/4" to 95-5/8". This system has a capacity of 150 pounds. The installation instructions for this product…

view full answer...

Answer 4

It is certainly possible that the springs have already worn out. One way or another, the leaf springs on your Cargo Mate enclosed trailer definitely should not be flat. Assuming you have the original hangers and shackle strap on the trailer and they…

view full answer...

Answer 5

The spring with the black cable drum should always be mounted to your LEFT, standing on the inside of the trailer looking out. This is very important for proper operation. Dual spring systems, like #ERS160D96, have a red-coned and a black-coned…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yes, the Dexter Self-Contained Hydraulic Jack #DX72CR does come with a manual hand pump that can be used as a backup in the event of hydraulic malfunction.

view full answer...

Answer 8

Hey Scott, yes each of the ends of the dual ramp springs like the part #M346FR that you referenced turn independently. How heavy is your tailgate?

view full answer...

Answer 9

Hey Dennis, To my knowledge there isn't a lift-assist for an enclosed trailer door so the only option we can offer would be to swap out the door spring from a single #M374FR to a dual spring system like #ERS120D81 to give you a bit more balance…

view full answer...

Answer 10

Hello Vance, Awesome job on building your trailer! I am happy to find the right spring for you, but in order to do I am going to need quite a few measurements. I have included a picture of what measurements I need, can you please respond back with…

view full answer...

Answer 11

We do not sell a complete kit but we do sell a backing plate that is compatible with the Square D-Ring Tie-Down Anchor item #ABS69FR. It is the Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor item #BP05.

view full answer...

Recommended Size of Ramp Spring for 7 x 16-Foot Enclosed Trailer

Featured Help Information

Miscellaneous Media

Continue Researching