Review of TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA8HD
Customers compare 362SA8HD to these similar products
Products Featured in this Video
TRC Enclosed Trailer Parts - Ramp Door Spring - 362SA8HD Review
Today we're going to take a look at the conventional dual spring ramp door spring for eight inch wide enclosed trailers. It has a 230 pound weight capacity. This will allow you to replace your old trailer door spring using this nice, heavy duty dual spring conventional ramp door spring and, again, the application for this is eight foot wide trailers. These ramp door springs will let you easily lift and lower the door on your enclosed trailer without the risk of injury because it'll help take on the weight of the trailer door so that you don't have to. The spring will reduce wear. It helps prevent damage to the door hinges.The cable drums which are located on each end here, that the cable goes around, they are marked right hand and left hand.
This one will be the left hand. Over there will be marked right hand. What you want to make sure is, when you do install this, the right hand side should be mounted on the trailer on the curb side of the trailer and the left hand side should be on the road side on the driver's side.The spring is a sturdy steel construction. It is made in the USA. It does include everything shown here.
The galvanized cable with the quarter inch nylon eyes on each end, the brackets, a nice set of detailed instructions. The mounting hardware to install the spring to your trailer is not included and the reason that is, is because your different applications would require different mounting hardware so they don't include the hardware that you would have to supply.Also, this middle bracket right in here is adjustable to allow for multiple choices for you where you need to bolt it down.Just a warning on the installation of the spring: it is recommended that only individuals who have experience winding torsion springs should install this product because winding the springs can be very dangerous if you're not familiar with the procedure. If you've not worked on a torsion spring suspension.our torsion spring system.before, we recommend contacting a local garage door company to help you install this system.A few specs on this. When it's mounted, from one end to the other end is 94 inches wide. The depth on it, which is measured when this is mounted...
This would mount to your trailer header so the depth of it is about five and three quarter inches deep and the overall height is about four and seven eighths inches tall. Again, the spring capacity on these dual springs is 230 pounds.That should do it for the review on the conventional dual spring ramp door spring for the eight foot wide enclosed trailers.
Info for this part was:
Installed by:
Jeff D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.