Troubleshooting ER Code on Draw Tite Activator Brake Controller

Question:

Was working fine.... When applying the brake pedal I get a reading on the controller after I put it in gear and step on the brake pedal I get a code that says ER. Hopefully you can help

asked by: Greg M

Expert Reply:

I wish I had better news, but the ER code means that there is an internal problem on the Draw Tite Activator part # 5504 and that it needs to be replaced.

For a new brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes.

expert reply by: Jameson C

Richard M.

11/1/2021

So my draw tite controller is approximately 18 months old and I have to replace it? Can't be repaired? Talk about a great product!!! What a sorry company to make trash and sell it with a clear Conscience.

Richard M.

11/1/2021

Les D.

11/2/2021

As described in the article you commented about, yes, and ER code means it has stopped working and are not serviceable. For a new brake controller Prodigy P2 Brake Controller part # 90885 is a good choice. It works well and is easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. I am sorry that I don't have better news for you.