2012 Honda Odyssey Roof Rack by Inno

Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.

Features:

• Low-profile crossbars let you build a roof rack for your vehicle
  • Pair with Inno feet to create a complete roof rack
  • May also require a custom fit kit
• Elliptical shape helps to create an aerodynamic system with no need for a fairing
• Integrated T-slots make it easy to slide channel-mounted carriers and accessories onto the bars
  • Clamp-on accessories conveniently wrap around bars
• Flexible rubber strips keep out dirt and allow for simple mounting in T-slots
  • Press down on strips and slide accessories into slots - no trimming required
  • Plastic coating on strips allows T-bolts to slide easily along channel
• Bottom channels allow easy installation to Inno roof rack feet
  • Simply clip the foot into the crossbar and slide it along the channel
• Lightweight aluminum construction is durable and rustproof
  • Internal extrusions provide exceptional bar strength
• Glass-blasted powder coat finish resists corrosion, scuffs, and scratches
• Matte black color

Specs:

• Quantity: 2 crossbars
• Weight capacity: 165 lbs
  • Always observe your vehicle's maximum roof load capacity
• Front crossbar dimension: 54" long x 3-1/8" wide x 1-1/8" tall
• Rear crossbar dimension: 57" long x 3-1/8" wide x 1-1/8" tall
• T-slot dimensions: 13/16" wide x 7/16" tall
• T-slot top opening: 3/8"
• Underbar slot: 10"
• Limited lifetime warranty

These low-profile Inno Aero crossbars let you build a stylish, aerodynamic roof rack for your vehicle. The crossbars require 4 Inno Flush or Through feet to mount the rack to your roof. You may also need a custom fit kit to mount the crossbars. Built-in T-slots in the tops of the bars let you easily mount carriers and accessories on the rack. Flexible rubber strips in the channels keep out dirt and require no trimming or adjustment. The crossbars are also constructed of strong yet lightweight aluminum so they won't rust.

Aerodynamic Shape

These lightweight bars have an elliptical shape. This aerodynamic, low-profile design helps to reduce wind noise and drag when you drive. This means you won't need to add a fairing.

Strong, Durable Construction

Inno Aero crossbars are constructed of sturdy, lightweight aluminum. Internal extrusions add strength and structural rigidity without adding a significant amount of weight. The bars are rustproof so you can leave them on your roof all year long, wherever you go. The sand-blasted powder coat finish resists corrosion, scuffs, and scratches. And the matte black color will look good on any vehicle.

Slide-On Installation

Each crossbar has a channel in the bottom that lets you install Inno feet (sold separately). Slide the channel cover over to reveal a mounting hole for the foot. Clip the foot into the crossbar and then slide it into place along the channel. Built-in bar end stops in the channels will keep the feet from sliding off the ends of the bars.

To complete installation, mount the feet to your roof. This may require a custom fit kit (depending on your application). Attach the locking covers (included with the feet) to secure the roof rack to your vehicle. Locking the covers also secures T-slot-mounted accessories to your crossbars.

Channel-Mounted and Clamp-On Accessories

This bar has a built-in T-slot that allows you to mount bike racks, watersport carriers, ski racks, and more. The EZ-Slide rubber strip in the bar lets you mount accessories without the need to remove or trim the strip. Just press down on the ends of the flexible strip and slide your accessory's mounting hardware into the T-slot. This strip has a plastic coating so it's easy to slide T-bolts along the channel. The strip runs the full length of the bar, so it helps keep dirt out of the channel when you're not carrying accessories.

You can also attach most clamp-on accessories to the bar, and the rubber strip provides a no-slip cushion for any accessories that rest on it.

INXB138 Inno Aero Aluminum Load Bar - Black - 54" Long - Qty 1

INXB145 Inno Aero Aluminum Load Bar - Black - 57" Long - Qty 1

These Through feet help mount 2 Inno Aero crossbars to your vehicle's factory raised side rails to create an extended-length roof rack. Steel straps wrap around rails and tighten with cam-action handles. Locking covers secure feet to side rails.

Features:

• 4 Feet let you mount Inno Aero crossbars on your vehicle's factory raised side rails
  • Pair with 2 crossbars to create a complete roof rack
• Through design helps create an extended-length roof rack that maximizes carrying capacity
• Rubber-coated stainless steel straps secure feet to your raised side rails
  • Straps wrap around rails, hook into bottoms of feet, and tighten with cam-action handles
  • Rubber coating on straps protects rails from scuffs and scratches
• Locking covers secure system to your roof
  • Also secure T-slot-mounted accessories to your crossbars
  • 2 Keys included
• Durable, weather-resistant AES plastic construction
• Easy, slide-on installation to channels in bottoms of crossbars

Specs:

• Weight capacity: 165 lbs
  • Always observe your vehicle's maximum roof load capacity
• Limited lifetime warranty

XS150 Inno Aero Bar Through Stays for OEM Raised Side Rails - Qty 4