Roof Rack Includes:
Part Numbers: INB127,INSUT,INK593
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Specs:
These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation.
Features:
Specs:
These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2014 Toyota Corolla, we have our NO Square Bars roof rack. It comes in three parts. Our NO square bar, part number INB127. Our foot pack, INSU-K5. And our fit kit, INK306. We have a first front bar installed.
I'll show you how to install our back bar. It's the same set up as the front. We have our foot pack. We have our fit kit bracket. I'll slide that right on the bolt, right into place.
We have our lock bracket. Slide that on. Then we have our locking nut. We'll just thread that into place. inaudible 00:00:51 started, so we can put it on the vehicle.
I want to push down on our thread stud, that way it opens the clamp. We can slide it on. Then we want to go to our instructions for the measurement for how far this needs to be. We found the center of our bar earlier, so I can start with my measurement there. I go to the beginning edge of our bracket. For those measurements, you can find those in our instructions.
Last but not least, for our foot pack we put our pad in place. To protect our cargo, we'll just put our rubber end cap on. Now I have our other side, passenger door open, I want to have both doors open to put this in place, because the clamp will go underneath half of the door. Now that I have that set in place, go to our instructions we find our next measurement. It gives us a measurement from where the doors meet here in the middle, to the middle of our bracket. In this case, we're supposed to be at 17 and 3/4, so I have to move up. I'm going to do the same measurement on the other side. Again, from the center of where our doors meet, to the center of our bottom bracket. Now that I have this side in place, I'm going to go ahead and tighten it down. I'll tell you what I'm doing on the other side. I just want to get this side snug. I'll come over and check my measurement again, one more time, just in case I moved it, and tighten it down. It looks good. Just want to make sure we got our clamp on our door. It never hurts to keep measuring, just in case you move something in your process. Now that we've got this in place, I'm going to go ahead and tighten. Before I do that, I want to make sure our locking brackets are facing in the right direction. Flip that up and I'll tighten this down. It's a little passed snug, and I just go back and forth until I get the desired tightness, so I am sure that the bar won't go anywhere. Now that I'm happy with where I've got it, I'll unlock the nut here, so I can push my spring in. I'll take my key and lock it in place. That way it's not going to go anywhere. I'll do the same thing to the other side. If you're having trouble with this, it's just a slight turn and then you'll be able to push it in. Now that we've got everything locked in place, that's our look at our NO Square Bars roof rack, on our 2014 Toyota Corolla.
Average Customer Rating: 4.7 out of 5 stars (1321 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars. These durable, pivoting feet help you mount 2 Inno square crossbars to your vehicle's naked roof. Torque-control knob prevents overtighting. Locks and keys included. Tool-free installation. These custom-fit clamps and pads let you mount 4 Inno XS200, XS250, or INSU-K5 feet to your vehicle's naked roof to help create an aftermarket roof rack system. Clamps mount to feet with bolts. Kit includes 4 clamps and 4 pads.
Got it for a 2006 Toyota Prius. Overall a great purchase. It was sturdy and never had any major issues. I would 100% recommend getting the locks.
I almost gave it 4 stars for one reason. If you put it on as the instructions tell you to, it whistles really loud. It just takes a bunch of small iterations and quick drives down the street to find out if it stopped making noise. Other than that, great purchase.
Ordered a full (naked) roof rack package with snowboard/ski attachment. Items arrived as described. Set-up was simple and flawless. Instructions are fairly clear & simple. A paper tape measure is included. No issues with fitment.Purchased the fairing to reduce wind noise and it works perfect! No excessive wind noise whatsoever -- can open sunroof comfortably if I wanted to. Have not yet put my snowboards inthe attachment yet, but do not foresee any issues. Roof rack is on a 2015 Infiniti Q40 (G37 sedan 2009-2015).
The roof racks have been great. I've used them with j-hooks and rear loading slider type pads. They are easy to install/remove. In the picture is my 17ft long sea kayak that stayed secure and safe on a 6 hour journey in high winds using the racks.
Fast delivery and great communication about tracking. Easy to follow instructions. Great fit and looks. Thank you.
Great cross bars to replace the rusty original cross bars this vintage Thule rack. Classic cars require these old style racks and many are 30+ years old and great to be able to give new life to an old rack system.
Awesome product. I’ve been looking for a while to find custom fit roof racks for my 2010 Dodge Caliber. the dealership told me I would have to drill them right to my car and the labour would’ve cost me a fortune. I’m so extremely happy that I found etrailer that had exactly what I was looking for! No drilling, and no hassle! The instructions were easy to follow and the assembly went smoothly ! Fast delievery and great customer service. I would 10/10 recommend etrailer to anyone who is looking for durable, stylish looking roof racks for a great price!
They look good the only problem is that the brackets that grip the rail are too straight so that the pads do not meet the roof and they bend the crossbar
For a roof with no mounts, this is a perfect choice!
The fitment selected for me by etrailer.com for my 2012 Ford Escape was perfect. The Inno Rack System is easy to install (made easier by the use of etrailer.com's instruction video links).
I chose the square bar fitment because I prefer the look over the various "aerodynamic designs", while I prefer the look over others, a wind fairing will prove to eliminate the very hint of sound that does emanate into the cabin.
If you are looking for a Clamp mounted system that requires zero modification/easily removabl this is the system for you.
So far so good! Was fairly easy to install. I will say the straps that came with it are not quite long enough for my kayak’s. Not an issue for me though. Overall I am definitely satisfied and would recommend for anyone that needs a rack for kayaks.
Just installed the etrailer inno square load bars on my 4Runner. I also purchased the Round/square Crossbar Fit Kit .
Looks great and mounted easily to my Prinsu Rack.
This car roof rack cross bars were easy to assembly. Attaching the cross bars to the car takes a little patience to ensure that the cross bars are centered on the car, the correct distance from the center of the front & rear doors and parallel. But going through it once it is easy to repeat. I have sued the carrier once to haul 13 2x4 lumber no problems.
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
I followed directions and the rack went on without a hitch. The measuring tape provided was a bit confusing but my tape measure did just fine. It pays to watch for any movement of the stays as you tighten them. It fit perfectly. I was impressed with the quality of the unit. The torque wrench provided was a nice bonus. I attached a boat rack for my rowing shell and I’m confident it will be safe all the way to the water.
We needed a set of crossbars for our vehicle and read many reviews of other brands before finding this product. We like the bars and the installation of them. We needed something trustworthy to accomodate our rooftop tent and this fit our needs. We experienced excellent customer service!
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Quick and easy. This roof rack was shipped quickly. Installation was super easy and it looks like it was made for my truck. Holds my canoe perfectly. Thank you!
Great product. Easy to install. This is one of three parts needed for a complete roof rack installation. Here is a photo of the finished installation on my 2015 Acura TLX sedan.
I'm very happy with the purchase. I wasn't sure about spending this much money on something that might not work well. After using it, I'd gladly purchase again for a different car.
Fit well on my car, was very solid and secure. Did not do any damage to the paint on my roof.
Installation is pretty easy - be sure to watch the video and follow the instructions for measurements to set bases to. I could see it being a nightmare to install without those measurements.
The kit also comes with a tightening handle that has a built in torque setting. It's not shown in the video, but a good idea to use so you're sure everything is tightened properly.
Fuel economy suffers about 10-15% with the racks on - even empty. I take them off when I don't need them. I marked the bottom surface of the bars with a paint marker so I know where to put the bases when I put them back on. I also painted on the measurements from the door post so it's easier to reinstall.
Also, an item was missing from the box. etrailer customer service was fantastic about getting me a replacement part.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
This is an excellent product. Well made. However, it comes in 3 separate packages with instructions for each. That is because some of the parts are specific to fit your vehicle. In my case, I have a 2015 Acura TLX sedan. It is important to read the directions that come with all of the components. While some of the parts look similar, they are not and must be put in the right place. Once I figured that out, it came together nicely. Attached is a photo of how the whole thing looks on my car.
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
Perfect Fitment for my 2012 Ford Escape, etrailer.com's fitment guide was spot on.
Product arrived on time and packed very professionally. Was very satisfied with the overall quality of the product. Everything went right together and fit perfectly. I dealt with a gentlemen named George J. He was very professional and extremely helpful throughout the whole process with updates letting me know how my order was going. Very happy with the product.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
Ask the Experts about this Roof Rack
Do you have a question about this Roof Rack?
Inno Accessories
Fit to this rack on your 2009 Toyota Corolla
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.