Expert Review Video:
Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
750 Pound Tongue Weight
7500 Pound Towing
Trailer Wiring:
2000 Ford Explorer Trailer Wiring
With tow package use 118241 for wiring
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Hitch will fit with full size spare tire stowed under vehicle
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Trailer Wiring:
2000 Ford Explorer Trailer Wiring
With tow package use 118241 for wiring
Features:
Fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection.
Installation Notes:
No drilling required for installation
Does not fit with 16" spare tire
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
400 Pound Tongue Weight
4000 Pound Towing
Weight Distribution Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Trailer Wiring:
2000 Ford Explorer Trailer Wiring
With tow package use C55241 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Keeps full size spare under vehicle
More Information >Trailer Hitch Size:
2 Inch Hitch Opening
Towing Capacity:
500 Pound Tongue Weight
5000 Pound Towing
Weight Distribution Towing Capacity:
600 Pound Tongue Weight
6000 Pound Towing
Trailer Wiring:
2000 Ford Explorer Trailer Wiring
With tow package use C55241 for wiring
Features:
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Installation Notes:
No drilling required for installation
Spare tire will need to be lowered or removed temporarily for hitch installation
Vehicles with a full size spare stored under the vehicle will not be able to store spare underneath after hitch installation
More Information >Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the…
view full answer...I&…
view full answer...I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for…
view full answer...If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly -…
view full answer...If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…
view full answer...Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit…
view full answer...A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…
view full answer...Thank you for purchasing from etrailer! You did a great job selecting compatible parts. When using Leaf Springs #e64SR with the #AP233 Equalizer Kit and the #H248 Hanger Kit, there should be…
view full answer...The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the…
view full answer...The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.
view full answer...Filter Products (8)
Contact and Help
What our customers are saying:
My hitch arrived quickly and at a good price. It was very easy to install. Great job and excellent customer service. Thanks for the great job. It went on quickly and easily. Definitely will recommend to other people. Outstanding all around.
Andy
Cincinnati, OH