To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima 60" JetStream MD - Black:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2017 Ford F150 we're going to be test fitting the Yakima Core Bar Roof Rack System, consisting of part numbers Y00422, these are the Yakima Core Bar Cross Bars, 60" long. Part number Y00146, these are the Base Line Towers for the Yakima Cross Bars, and part number Y006122. This is the Base Clip Fit Kit for you Ford F150. The Yakima Core Bar Roof Rack System is great for carrying a wide variety of accessories on your roof, while freeing up space inside your truck and your truck bed. It can also be used in conjunction with your ladder rack, to act as an extension for your longer ladder racks, or lumber, or whatever it is you're hauling. The two bars have a combined carrying capacity of 220 pounds, although you want to double check with your vehicle's manual to make sure your roof can withstand that weight. It also has these end caps that do come with knock outs that you can replace with Yakima Same Key Systems, so once you install this on your roof it will stay on your roof.
The bars here have a nice aerodynamic shape to them which will cut down wind noise and drag while you're traveling as well. Now that we've gone over some of the features of the roof rack system let's go ahead and show you how it installs. We already have it partially installed on our table here. This is going to be the rear bar, and our next step is to take our baseline tower, hook it up to our adaptor piece, and put it on to this end here. We'll first take our plastic adaptor piece here, and push it in. You're going to wait for two clicks to push that in, then this adaptor piece will fit on top like so.
So get it on top of that, and flip it upside down. You'll see that it's blocked off right now. We'll just open this piece here on the outside, and then we should be able to get to our screw and take our included tightening tool, and just loosely tighten that up. Then we'll slide this on. Once this is measured out as per the instructions we'll tighten it down the rest of the way. Now the nice part about this tightening tool is once it's completely tightened down we hear audible clicks so you know you're not over-tightening it. There we go.
Now while we use this area to tighten it down to the bar, this area here you'll see has these notches and this little slot here. You can loosen this up and adjust it accordingly, and your instructions will tell you if it has to go back or forward so many degrees. You'll adjust it accordingly, tighten it down, and then you're good to go. Before we put it on to our roof I'll take the rubber pad from our fit kit, and I'll push that into place. I'll push this end cap in as well. Now we can set it on our roof, in no particular place.
Next we'll measure between center of the bar to center of the bar for our cross bar spread. Again you'll find this measurement in your instructions. We'll take the clamp end, and that just pushes into place like so, and you can see how it sets about the doorframe. To lower that down we'll go to this screw, turn it to the right like so, and then we'll go to the center screw and we'll just snug it up against the doorframe. We'll repeat this for the driver's side, and then we'll completely tighten them down. Once you hear those clicks we'll close the door there, and then our final step is going to be taking our end caps, and pushing them into place. Then we can load up our gear and hit the road. There you have it for the Yakima Core Bar Roof Rack System, on our 2017 Ford F150.
Average Customer Rating: 4.7 out of 5 stars (205 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Follow the instructions, and you can't go wrong on the self installation
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Easy to install. It probably took 45min. I bought them for my 2024 Expedition to haul a canoe. I have not done that yet but I expect no issues.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
product was just what I needed The folks at etrailer were extremely helpufl!!
Love it! We've made several long trips with full luggage loads.
Well packaged and on time
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
The Yakima products are doing great. Just got home yesterday from a 18 day trip using them in Michigan's upper peninsula. Love them. Great products. Thanks again.
Not a bad setup. I dont believe you need the 60" bars i received as they hang over the edge of your Hyundai. You need to watch your head getting in and out of your vehicle. The Jetstream crossbars are very loud at speeds over 65 mph. Im probably used to it by now, but it is definitely noticeable. Much louder than an older Rhino Rack of similar dimensions i had. Install was simple and took about 30 minutes, just take your time and measure correctly like all roof racks.
Easy to order and quick to ship. Took a bit of time to get these installed correctly so they fit just right.
1 year later and still love my Yakima JetStream system. I've mostly used them to transport my kayak however I've also been able to transport some big box store items as well. They are very versatile. There is a t-track option as well as wrap around attachments. I've use ladder attachments, eyebolts, and Thule Hullavator in t-track. I've used Malone MegaWing and Yakima Skybox as wrap around attachment. What I really like about the t-track system is that you do not need to cut out the rubber track insert. You simply slide over the rubber, which allows you to adjust your system, on the fly, to load what you need to carry.
Great product fast shipping
Great! Easy to install!
Great service and great staff. They will have all the technical information you need.
Solid build quality and easy installation on my '21 Mazda CX-5.
SIMPLE & EASY1
Nicole was beyond helpful!!!
High quality bars that were easy to install to the Skyline towers and work great with our Yakima JayLow kayak carriers.
They work as advertised and have been holding up great.
I had a need for the Yakima Crossbars and Towers for my Expedition. With a short delivery time frame, I contacted etrailer knowing they are the best. Justin B. worked with me to get the correct parts then made sure that the products arrived in time, it did. The Towers, Bars and overall excellent customer service from etrailer made for a great experience. Thanks again for exceeding expectations etrailer!
Good transaction. Arrived quickly, new in box.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.